RC India

hlo everyone
this is my 2nd entry for 2016 sweepstakes.
i am starting my new build bloody baron. tiled plan is available on flitetest.com
for wing i am using 3mm depron and 5mm for fuselage.
electronics:
cf2822 motor with 30a esc
1000mah 3s
3 9gm servos
9x4.7 prop.

wing build

thank you iyer sir for entry.  :hatsoff: :hatsoff:

wing covered by 2inch packing tape

fuselage and stabiliser

ready to fly  ;D

Clean build

Sent from my ONEPLUS A3003 using Tapatalk

Excellent work by a member who started this hobby only in Aug 2015!

thank you niteenk sir :thanks:

thank you iyer sir this is only possible because of you sir :hatsoff: :hatsoff:

regards

here is the maiden video of my bloody baron
i have tried my first loop on ft-22 raptor(1st entry for sweepstakes 2016) but i was unable to record video that time.
this is my second model in which on the maiden flight and i have tried loops and axial roll. ;D
please see my full video and please mention comments :thumbsup:


https://youtu.be/lyPYs_RhUuA

 {:)} {:)} {:)}

Congratulations!

thank you so much sir
i really heartly waiting for you reply :bow:

I was following the whole build very carefully, and just waiting for the maiden

I liked the build, some original ideas were used,and of course the maiden. Well done, and I really mean this from my heart

May 2017 be your year of flying high, Happy New Year!

thank you sir and happy new year to you too

regards

The BloodyBaron looks beautiful.

thank you manoj sir :thanks:

Absolutely first class!

The smoothness of the flight tells us that:
1. Construction was accurate
2. CG was correct
3. Trims were correct

Well done  {:)}
Even the video is very well made.

You need expo now, but i think your Tx doesn't have dual rates or expo.
You can reduce the throw on the ailerons to make it bit less sensitive.
Now that you have the confidence, start your roll from slightly climbing flight, and do them a bit slower.
And remember to cut/reduce power after crossing the top of the loop.

Tomorrow is Sunday.
So we expect to see a video with a little larger loops and a slower roll.

When the roll is slower, you can stop after 1/2 roll, push the stick forward slightly...
But only after your exams.
Meanwhile you can imagine (and tell me) what will happen...

(His father may now agree to buy him a glow engine in 2017 to build a 'real' model in balsa, after having bought him a Bullet Classic this year!)

thank you very much iyer sir :bow:
it seems to me like my new year have started few hours before  :giggle:

sir after my exams i will definately try for bigger loop and slower roll
answer:
i think if i fly slow , stops after 1/2 roll and move stick sligtly up it will start flying inverted :headscratch:

regards

Pariksha me safal, to sir ke bal...

ok sir, next time inverted (sar ke bal) ;D

regards