|
Title: "2016 sweepstakes" MF-j20 JEPSON Post by: ramarao on December 23, 2016, 03:43:02 PM This is from mesarc
http://www.mesarc.club/ iam using 5mm depron for this build Turnigy 2200kv motor 40A esc 2200mah 3s lipo Title: Re: "2016 sweepstakes" MF-j20 JEPSON Post by: ramarao on December 23, 2016, 03:45:21 PM plan templates
Title: Re: "2016 sweepstakes" MF-j20 JEPSON Post by: ramarao on December 26, 2016, 08:44:44 AM depron parts
Title: Re: "2016 sweepstakes" MF-j20 JEPSON Post by: ramarao on December 26, 2016, 08:46:43 AM finally finished build
Title: Re: "2016 sweepstakes" MF-j20 JEPSON Post by: ramarao on December 26, 2016, 08:49:09 AM few more pics
waiting for maiden..... :) :) :) :) :) :) Title: Re: "2016 sweepstakes" MF-j20 JEPSON Post by: sanjayrai55 on December 26, 2016, 09:56:30 AM Lovely :thumbsup: :thumbsup:
Title: Re: Post by: ramarao on December 26, 2016, 01:15:15 PM Thank you sanjayrai sir ....:)
Sent from my ASUS_T00J using Tapatalk Title: Re: "2016 sweepstakes" MF-j20 JEPSON Post by: gaurang.1972 on December 27, 2016, 05:15:29 PM Very good ramarao {:)} {:)} {:)}
Title: Re: "2016 sweepstakes" MF-j20 JEPSON Post by: ramarao on December 29, 2016, 02:46:11 PM @gaurang
Thank you....:) Title: Re: Post by: ramarao on January 08, 2017, 08:01:54 PM First maiden flight was good but video not taken properly plane not visible in video..
Sent from my ASUS_T00J using Tapatalk Title: Re: Post by: ramarao on January 08, 2017, 08:02:36 PM 2nd flight some problem with elevator so its crashed
Sent from my ASUS_T00J using Tapatalk Title: Re: Post by: ramarao on January 08, 2017, 08:02:51 PM https://youtu.be/iJfakNhux54
Title: Re: "2016 sweepstakes" MF-j20 JEPSON Post by: manojswizera on January 09, 2017, 11:27:04 AM It took off nicely . what happened next ?
Title: Re: Post by: ramarao on January 09, 2017, 11:54:13 AM Crashed due control surfaces didn't responded in mid air ...
Sent from my ASUS_T00J using Tapatalk Title: Re: "2016 sweepstakes" MF-j20 JEPSON Post by: ramarao on January 21, 2017, 06:12:05 PM control surfaces not responded in mid air due to reciever range problem
|