Title: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on October 28, 2016, 06:10:09 PM Insane aerobatics with the flavour of slow flights, the all new 'Mini 3DX' is going to prove it's worthiness with its outclass abilities.
Specification: Wingspan-32" Weight: will be updated AUW: will be updated Servos: 2×2g & 2×4.3g Battery:7.4v 500mah lipo Motor: Sunnysky x2204 kv1480 Esc: Hobbyking 10A Material:3mm non laminated depron Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: sanjayrai55 on October 28, 2016, 08:08:59 PM Looks good :thumbsup:
All the best Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on October 28, 2016, 09:42:20 PM Sanjay sir, :thanks:
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on October 28, 2016, 09:44:44 PM Starting of with the fuselage.
The layout in cut out from 3mm non laminated depron. Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on October 29, 2016, 06:40:51 PM Snaps showing the elevator joint.
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on October 29, 2016, 06:45:20 PM Some progress on the fuselage.
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on October 29, 2016, 06:52:40 PM Building the wing. Ailerons are cut out along the wing to make the hinge joint.
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on October 29, 2016, 06:57:41 PM Close up's of aileron joint. Used some clear tape for hinging, works well.
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: K K Iyer on October 29, 2016, 08:01:00 PM A pleasure to see the neatness and quality of workmanship {:)}
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on October 29, 2016, 09:34:37 PM A pleasure to see the neatness and quality of workmanship {:)} Great to hear that, thanks! :DTitle: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on October 29, 2016, 11:24:43 PM Fixing the wing and the horizontal stabiliser on to the fuselage. Reinforcement would be done later with cf.
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on October 29, 2016, 11:29:12 PM The airframe is almost completed. Now just have to add the rudder with hinges.
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on October 29, 2016, 11:30:35 PM Bare weight of the airframe.
39g Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: Antriksh on October 30, 2016, 03:55:37 AM which foam is it?
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on October 30, 2016, 07:13:42 AM It's depron
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 14, 2016, 02:29:34 PM Making the motor mount.
Motor mount is made out of PCB board and it is hot glued to the fuselage. Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 14, 2016, 02:45:44 PM Securing the servo's in place.
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 14, 2016, 02:48:41 PM Mounting the esc.
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 14, 2016, 02:50:49 PM Reinforcing the fuselage.Using 1mm carbon fibre rods.
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 20, 2016, 12:02:58 PM Control rods...
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 20, 2016, 12:14:17 PM .
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 20, 2016, 12:16:51 PM Decals.
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 20, 2016, 12:17:53 PM Ready to fly!
AUW-120g with lipo Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 25, 2016, 10:32:28 PM Video...
https://www.youtube.com/watch?v=tk9cw60rHMg (https://www.youtube.com/watch?v=tk9cw60rHMg) Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: sanjayrai55 on November 26, 2016, 07:25:09 AM Excellent. Bit more practice, and you'll be doing a perfect Hover {:)}
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 26, 2016, 07:47:32 AM Excellent. Bit more practice, and you'll be doing a perfect Hover {:)} :thanks:Very new to aerobatic profile's. ;D Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: K K Iyer on November 26, 2016, 11:13:12 AM I like your unhurried style.
No rush, no panic. Even in the 3 consecutive loops ;D {:)} Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: ramarao on November 26, 2016, 11:26:33 AM nice build........:) {:)} {:)} {:)} {:)} {:)}
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 26, 2016, 12:13:33 PM I like your unhurried style. :hatsoff: :thanks:No rush, no panic. Even in the 3 consecutive loops ;D {:)} Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 26, 2016, 12:14:36 PM @ramarao
Thankyou :) Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: sahilkit on November 28, 2016, 01:08:04 PM {:)}
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 28, 2016, 04:36:14 PM :hatsoff:
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: gaurang.1972 on November 30, 2016, 10:43:33 AM Very nice build {:)} {:)} :thumbsup:
Title: Re: '2016 Sweepstakes'- Mini 3DX Post by: kiran rc on November 30, 2016, 04:22:58 PM :thanks:
|