A little late submission due to my personal commitments.

1/8A LA stick from outerzone plans.

Build started on 27th with ribs cut and almost done in a day.

work remaining: motor mount, covering, hinges, servos and motors and she will be ready to fly.

Pics follows

some more
Wind done, shear webs added.

Some more
Fuse cut, all ready to take shape

Beautiful...
Power???
Covering???

Edit:
I think i'll also build one.
I think so will Col Sundaram. But probably he must have already built one 

Some more

to another balsa build. All the best, this looks like to be a fast build.

Some more

All set for covering.

added little fevicol on all joints for added strength, will be powered by a electric setup since the cox 0.010 is obsolete.

this is my first model in balsa hence took a simple model to gain some confidence. this has no tricky points, no dihedral, and just 2 servos and no rudder.

trying to find a suitable power setup for this.

any advice on the covering. i believe a normal covering would add too much weight on this.

This was completed in just 24 hours which lead to jr falcon. my next model.

@ ashok ji  neat build use the normal covering or use docylam for light weight but it is transperant. use emax 1806 for good performance.

  Nice and clean Ashok

Covering almost done, cant get the wings right,
hence rest has been done.

@v2 eagle,
Very nice.
What did you use for covering?

Great going sir

Using this one KK sir,
https://www.rcsportz.com/index.php?route=product/product&path=74_105&product_id=299

Seems like i have no idea about the temperature of iron, using a normal iron box covered with cotton cloth temp set to middle.

any ideas/alternates. entire fuse has been done, only the wing remains. wasted almost twice the amount of covering required for wing in this process.

i can get the help of my friend(janaf22) but would like to do it myself!

the expected AUW is around 150 gms for 20x4 inch wing.

now it stands about 80gms without battery, esc, servos and wing covering.

Covering done, a bit of correction, without electronics she comes about 55gms.

expected AUW: motor 18gms, esc 20gms, 2x9gm servos, prop, lipo of 50gms, and some 10gms in pushrod and others=170gms approx!!

Nice looking and light.

Wonderful  Subscribed!

Small and Nice model Ashokbhai

Model completed and comes to 140gms without battery. Pics of final product, maiden on sunday.

Here is the maiden of ashok's 1/8 la stick model

Congratz ashok

https://www.youtube.com/embed/09m0zpUMQsg

  Congrats Ashok

Didnt imagine my first model would come this good. Except a little cg correction required, all went fine and the model performed good, a little twitchy though!