hello everyone,
my exams got over yesterday, so now am up on another scratch build, specifications of which are described below

Type- high winger with aelirons
Specifications- wingspan 37', chord 7', fuse length 24', AUW ~300gm
Construction material- high density thermocol(will come to this later)
Powerplant- electric, 800kv bldc+ 1045 SF prop
Plan- from RCG, here is the link http://www.rcgroups.com/forums/showthread.php?t=1391606

Now coming to the construction material....the foam/thermocol am using is a pretty cool material I accidently laid my hand on, its a micro grain high density foam with grain size~ 1mm and comes in a thickness of 6mm and 10mm, it is available here at the stationary stores by the name of high density thermocol.

It is easily availaible, and as one of my architect friends (Abhay1290) told me is used to build architectural models. One sheet of this foam 3.5'X2.5' cost me Rs40, so its pretty cheap too.

I've finished the wings and ritenow am working on the tail feathers.....will post the pics as i proceed

one more thing fellas, I need suggestions on a couple of things,
1. which glue should I use for gluing foam.....am using fevicol ritenow but its too slow
2. what should I use as the spar?
3. the plan suggests slightly under-chambered wing...so please suggest some method to induce chamber in an otherwise flat wing
4. how to make the undercarriage strong enough to withstand the force of landings....as everything is foam here?

here comes the wing and the tail feathers

fuselage sides cut......it is slowly taking shape

Cool Bilal...... where is it you are going to put the motor ? make a Plus at the nose for extra strength ( as in 3D  planes)

Spar can be only carbon --- as no other material is possible in small planes ( try balsa / bamboo skews)

Also for fuses put a bandage patti in between and stick , post that cover with brown paper cover for extra strength.
You can also sandwich a bamboo skewer in fuse.

For under cambered cut the shape in fuse as per the reqd so that the wing takes the shape of the cut. in the edges make ribs (as you make with balsa ) and stick underside of wing with pressure this will give shape to the wing in case it is warped atleast give 2 such ribs. hope you understood what i am trying to say.

Fevicol is the best.... else try foam safe glue/ 5min epoxy from HK but its going to be expensive.

This plane of yours is very close to one i was planning to make..... Can you share the plans...

Ailerons ?? are there any ?

Your cutting skills are exceptionally good 

first of all sir, thanx for liking my work

sir, this isn't a 3d plane as it might seem from the last pic(i just placed the component together to get a feel of what it gonna look like)......it is actually a full fuse foamy with box type fuselage....those are just the fuse sides you see in the pic. The fuse stilll needs the top and bottom, and a bit sanding

i can't share the plan on the forum as their might be copyright issues, but gimme your email and i'll mail you the entire package along with the build pics.

am using fevicol at the moment.....but i heard somewhere that pidilite makes a foam safe glue that works best in case of thermocol......its just that i can't remember the name

As far as the spar is considered, i don't have access to CF......so i was thinking of using either the glass fiber rods i have lying around or bamboo skewers used by the florists....am still confused

the original plan suggested a slightly under-cambered Kfm airfoil.....but i want it to be an under-chambered clark-y (i just don't like the look of KFm airfoil) as shown in the second pic.....so which would be better

for forming  the chamber I thought bending the wing over a form while heating it with a heat gun, but your idea seems better.....because with heat gun, one slip of hand and vola! you got a hole in your wing

will keep the folks here updated,

happy holidays

nice going bilal,

i just returned from my trip..
i am eager to see the progress...

would be visiting you tomorrow...
keep it up

here is the update,

center block completed and the tail surfaces are covered in newspaper....i did this to provide strength

folks, I still need suggestions on using either the Kfm airfoil or regular clark-y with slight under-chamber ......and also on forming the chamber in the wing......seniors kindly pitch in  

the bigger square hole in the center block is for the servos and the adjacent slot is for the control rods

good going Bilal..... how good it was if we could buy from some shop the items in your last pic...as a kit.

hahaha.........if shipping wasn't an issue.....I would have made a kit for you, sir. But i can still offer you one when you visit Lucknow next time

I returned to hostel a couple of days ago and resumed building.......here is what i have build so far

I have chosen kfm1 airfoil for this plane just because of the ease of building
 

the wing's leading edge is sanded to an aerodynamic shape upon gluing the step

the LE has come out pretty smooth and uniform, much better than what I expected.........the wings are to be joined with a spar in between to provide the correct dihedrel which is 7 degrees for each wing half

the motor would be screwed to a piece of 3mm plywood which I would then glue to the fuse.....hopes it stays on with all the pull from the propellor

and this is how it come up.........pretty much identical to the cad drawing

I think the pics are pretty much self explanatory, but if still anything bugs you, feel free to ask questions

and suggestions are welcome for the paint scheme

bilal, i cant resist to see this beauty soon.
I am glad the way you figured out to make the dihedral..

Any guesses for the weight you have gained so far??

good work bilal... looks cool.. 
 And i do know the weight will be lightest, coz of thermocol foam...

Very good build. I wish there was some way you could make the joint between your motor ply firewall and the fuse more failsafe

Bilal how the wood for dihedreal is cut in that shape or uses something else

Swizera sir, the wood has been cut by hand using coping saw

Cool build, Bilal  
Looking forward to the flight video.....

looks good, isn't it?

thanx Veloci sir, video would take some time......probably another weekend

Hey i'm still in my final year of engineering........technically not old enough to be called 'sir'....   

Bilal this is very nice.

1. why gap in wings... the strength would be more if you join them....
2. Have bamboo skewers on the fuse for strength..... make a slot and fill with fevicol.
do not worry about the weight once fevicol dries it will be less.

Whats the progress bilal?
Have you started covering the bird?

I know I am late on this thread but Wow...Another Classic High Winger. I just love those relax flights. Subscribed to the RCG thread too. Good Work Bilal. Would be exciting to see this bird flying. Don't forget a flight video...

Cheers.
 

thanx everyone

Saurabh sir, there would be no gap i between the wing.....that pic was taken just to show the center spar, i covered it later on.....and I'll try the bamboo

Sumeet sir, thanx for stopping by....will surely post the video, lemme finish it first

hello everyone,
there is some good news.....did maiden today, the plane flew grate.....really slow and docile......and the 9040 SF prop gave ample of thrust, i could literally prop hand with full throttle   shot some videos today but nothing was clear due to dim daylight, will shoot and post another one tomorrow........

till then, happy flying y'all

and a lot of thanx to the people who helped me in this build, particularly Abhay, Saurabh sir(rastsaurabh), Vishvesh and Gusty sir etc

Excellent build.
I really like mocking up a CAD model before building.
Are you a mechanical engineer?

yes sir I am a mechanical engineer (well technically am going to be one, am a b.tech student ).......and that cad drawing really proved its worth while building

Yup. Which college you doing from?

And finally the much awaited video guys



this thing flies really slow, a complete bliss for a beginner like me

That is really a slow flyer...
Congrats Brother..
Nice build and fly...  Keep up...

nice video.... and i like the bird

Good job .... keep on going

no video seen

Sails like a bird! Is it a little tail heavy? Slight stalling, or was it overcontrol on elevator (like I normally do  )

Saurabh sir, the video is working fine.....must be an issue on your end

Sanjay sir, 'twas a combination of both

Guys where is the video i am not able to see ( only Bilals comment is there).

Regds

I am seeing this

Saurabh

something is wrong with your plugins i guess

Hello Bilal, I just watched the video, Your plane Flies great. It is very suitable for the beginners.

Great successful build Bilal....!!!! Keep building & posting...!!

Cheers.

hi can you please tell,if i am using thermocol what should be density?

hi can you please tell,if i am using thermocol what should be density?

hi can you please tell,if i am using high density thermocol what should be density of it?

hello bilal bhaiya really a bird as told in the video can you mail me the plans my email is cool65nitesh@outlook.com
what motor you are using