Title: Build log:junior 100 Post by: harshit batra on November 22, 2016, 09:08:19 PM After flying sanjay sir's junior100 me too got an itch to make it :giggle:
And here's what i made (https://s5.postimg.org/z1iq3ev4n/20161012_155427.jpg) (https://s5.postimg.org/z1iq3ev4n/20161012_155427.jpg) many many thanks to sanjay sir who helped me so much during this build ,infact a part of the build has been done in his workshop only. Title: Re: Build log:junior 100 Post by: harshit batra on November 22, 2016, 09:32:30 PM Plans are from
https://outerzone.uk length:820mm wingspan:1120mm Auw:950g Motor:2836 1100kv prop :10×5 Esc:40 amp Battery:2200mah 3s 11.1v Servos:2-9gram servos for wings 2-14gram servos for rudder and elevator Title: Re: Build log:junior 100 Post by: harshit batra on November 22, 2016, 09:41:07 PM Wings made from 3mm corro and ailerons from 4mm corrowith wooden spar
(https://s5.postimg.org/q7t5kwahj/20160627_101308.jpg) (https://s5.postimg.org/q7t5kwahj/20160627_101308.jpg) Title: Re: Build log:junior 100 Post by: harshit batra on November 22, 2016, 09:59:52 PM Fuse cut out from 4mm corrowith a 5°of downthrust and 3 to 4 degrees of right thrust markings (if you are aiming at fully flat bottom wing then i would recomend the down thrust to be just double with 5degrees of down thrust plane had a very high tendency of pitching up and stall)
(https://s5.postimg.org/ch8fnrtw7/20160627_130458.jpg) (https://s5.postimage.org/ch8fnrtw7/20160627_130458.jpg) Title: Re: Build log:junior 100 Post by: harshit batra on November 22, 2016, 10:15:34 PM (https://s5.postimg.org/wakjgh79z/20160726_223152.jpg) (https://s5.postimage.org/wakjgh79z/20160726_223152.jpg)
i made two formers from 3mm ply wood and motor mount from 10 mm plywood Title: Re: Build log:junior 100 Post by: harshit batra on November 22, 2016, 10:18:52 PM (https://s5.postimg.org/o3sjowh7b/20160801_171112.jpg) (https://s5.postimage.org/o3sjowh7b/20160801_171112.jpg)
epoxied the former pieces and support for tail wheel and elevator. Title: Re: Build log:junior 100 Post by: harshit batra on November 22, 2016, 10:26:30 PM Dry fitting elevator and rudder
(https://s5.postimg.org/spjm04wev/20160801_183538.jpg) (https://s5.postimage.org/spjm04wev/20160801_183538.jpg) (https://s5.postimg.org/7em1vveaf/20160801_183550.jpg) (https://s5.postimage.org/7em1vveaf/20160801_183550.jpg) Title: Re: Build log:junior 100 Post by: harshit batra on November 22, 2016, 10:35:39 PM Main landing gear
(https://s5.postimg.org/krp6yhj4n/20160807_230915.jpg) (https://s5.postimage.org/krp6yhj4n/20160807_230915.jpg) Scratch built tail dragger used 1.5mm aluminium sheet and 2mm steel wire (https://s5.postimg.org/qv6rie9ef/20160805_195532.jpg) (https://postimage.org) (https://s5.postimg.org/vskc3ibdj/20160805_195539.jpg) (https://postimage.org) Title: Re: Build log:junior 100 Post by: harshit batra on November 22, 2016, 10:44:11 PM (https://s5.postimg.org/cturwu5uf/20160809_214551.jpg) (https://postimage.org)
(https://s5.postimg.org/f9wlaonx3/20160809_214606.jpg) (https://postimage.org) Title: Re: Build log:junior 100 Post by: harshit batra on November 22, 2016, 10:48:40 PM Made holes in firewall to let the air cool the battery and esc
(https://s5.postimg.org/eiz9r5w5z/20160809_214923.jpg) (https://postimage.org) (https://s5.postimg.org/uspfu26tz/20160809_231839.jpg) (https://postimage.org) (https://s5.postimg.org/b9kukp82f/20160809_231854.jpg) (https://postimage.org) Title: Re: Build log:junior 100 Post by: harshit batra on November 22, 2016, 10:52:51 PM Servos and pushrods attached
(https://s5.postimg.org/4hufhuj2v/20160826_191009.jpg) (https://postimage.org) finished fuselage (https://s5.postimg.org/rush0cz6f/20160826_231056.jpg) (https://postimage.org) Title: Re: Build log:junior 100 Post by: harshit batra on November 22, 2016, 10:56:32 PM A picture with sanjay sir's junior 100 ;)
(https://s5.postimg.org/poy65uvpz/20160827_081422.jpg) (https://postimage.org) Title: Re: Build log:junior 100 Post by: harshit batra on November 22, 2016, 11:32:48 PM After some vinyls
(https://s5.postimg.org/umbqqyxp3/20160904_114330.jpg) (https://postimage.org) (https://s5.postimg.org/5f0uqpul3/20160904_114257.jpg) (https://postimage.org) (https://s5.postimg.org/8xcun3vh3/20160904_114230.jpg) (https://postimage.org) (https://s5.postimg.org/duqf87xg7/20160904_114346.jpg) (https://postimage.org) Title: Re: Build log:junior 100 Post by: harshit batra on November 23, 2016, 12:04:30 AM Video of flight
https://youtu.be/NvhHSTS_DrQ Title: Re: Build log:junior 100 Post by: sanjayrai55 on November 23, 2016, 05:38:08 AM {:)} {:)}
Well done. Now plan the next - QB 10L Title: Re: Build log:junior 100 Post by: manojswizera on November 23, 2016, 10:37:49 AM Very well harshit,
This is how things turn out , when you have some very experience and helping hand on you. Title: Re: Build log:junior 100 Post by: harshit batra on November 24, 2016, 12:21:24 AM {:)} {:)} thanku sir 😊 and yes i will try qb 10 after this semester exam Well done. Now plan the next - QB 10L Title: Re: Build log:junior 100 Post by: harshit batra on November 24, 2016, 12:28:38 AM Very well harshit, Thanks manoj sir and yes sir i am really fortunate to get experienced and very helpfull rcpilots to fly withThis is how things turn out , when you have some very experience and helping hand on you. Title: Re: Build log:junior 100 Post by: gaurang.1972 on November 25, 2016, 12:10:17 AM Very good build harshit {:)} {:)} {:)}
Title: Re: Build log:junior 100 Post by: harshit batra on November 25, 2016, 07:53:32 AM :thanks: gaurang
Title: Re: Build log:junior 100 Post by: samayaraj on November 25, 2016, 09:23:38 AM nice built :)
Title: Re: Build log:junior 100 Post by: harshit batra on November 25, 2016, 05:16:18 PM Thanks samyaraj
Title: Re: Build log:junior 100 Post by: ramarao on November 26, 2016, 11:29:27 AM nice build......:) {:)} {:)} {:)} {:)} {:)} keep doing more models with coro....:)
Title: Re: Build log:junior 100 Post by: harshit batra on November 26, 2016, 02:13:32 PM :thanks: ramarao
keep doing more models with coro....:) I will sir ;) |