|
Title: Depron is good! Post by: SI74 on December 29, 2015, 07:41:45 PM My newest model built yesterday. Built with 5mm depron only. Covered with wide clear tape for strength .
AUW=230 gms Wingspan= 76 cm chord= 20.5 cm Lipo- 500 Mah 2S Motor - 1600KV Prop- 8*6 DD ESC -20 amp Avionic 6 gm Servos*2. Lightweight Landing gear. End result: Joyful ride in the field :) Title: Re: Depron is good! Post by: VIPIN_KUMAR on December 30, 2015, 12:35:12 PM Good One..
Title: Re: Depron is good! Post by: Sukhpreet on December 30, 2015, 01:18:00 PM its an inspiration for beginners like me :bow:
Title: Re: Depron is good! Post by: SI74 on January 01, 2016, 02:32:08 PM One more build . This time AUW : 332 gms
Thermocol wing covered with food wrap 80cm*21cm Fuselage (60 cm)and tail out of depron Motor: Avionic proC2822KV1200 (very powerful motor) 30Amp ESC Turnigy 1000Mah 3S lipo Two 9gm servos Flysky 6ch TXRx Since the AUW is more, not a slow flier. This time enjoyed fast pace. |