hey guys i am having my diwali vacations and i wanted to start on a project as i have lot of surplus left after space shuttle project

that is

4 different turnigy 3 cell lipos = 2200x1 and 2650x3
about 10-15 different sized servos
3 ducted fan but it is still kept for space shuttle project but as i am planning to reduce its weight i think i can use one or two max
3x 40 amp esc's
two 222w motors as the vtol projects prototype ver.air4b is now about to start and about 7 to 8 props
and my futaba 6ch tx is there tooo

please help me find a plane which i can fly with the edf or the http://www.r2hobbies.com/proddetail.php?prod=rcps81518_p

i want a plane which i could build in one day and setup the electronics on the second day

subbu

  let me see if can find anything or build a profile 3D model

very very very good build

http://www.rcgroups.com/forums/showthread.php?t=1124466

subbu

well if i am going for edf this one is good i have built many planes from here


http://www.parkjets.com/free-plans.html

subbu

Why not do something origninal with your own ideas.... Here are a few that I could think of

1, Dihedral on demand - Can change dihedral during flight
2, Sweep on demand - Can change the wing sweep angle on flight
3, Or may be something like a transformer...  .. I am thinking of a plane that could curl its fuselage on to itself so that it could land like a rolling donut.. Just a concept no solid design realized yet.

Subbu, its time to improvise and I am sure you have the skill.

-Ismail

THANKS FOR THOSE WORDS my brain has stared its thinking process.


thanks a lot

subbu