RC India
Welcome Guest, please login or register.
 
Pages: 1 [2] 3  All   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« Reply #25 on: February 20, 2013, 06:20:46 AM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



Great going Arun sir.......we'll be up with our build in a day or two, so keep watchin, ;-)
Bilal thanks for that... Want improve my design after watching your's.. I know you are a very good scratch builder and you have already proved it... Waiting eagerly for that beauty... All the best guys.. Smiley
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Read
« Reply #26 on: February 20, 2013, 06:25:40 AM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



Before adding weight to nose, adjust battery and electronics board position for CG balancing so that every milligram can be saved.

Sir actually i purposely added the foam in front not only to correct the cg but also to sace the fuce from crash.. now it crashed about 50 times while testing glide and also in throttle.. But no problem with the fuse till now.. The 1 gm of weight is doing his job very nicely.. Smiley

Sir currently I am controlling the elevator like that only by throttle inc/decr..
Did i missed something? like abhay suggested?(keep the motor 1-2 degrees low)
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Read
« Reply #27 on: February 20, 2013, 08:46:28 AM »
KALYANPRODHAN
Global Moderator
Forum Hero

*****

Reputation Power: 17 
KALYANPRODHAN has no influence.
Offline Offline

City: Kolkata
State: West Bengal
RC Skills: Intermediate
Posts: 1584
Join Date: Jul, 2010

Information sharing improves knowledge of both.



Good Job. Hope 3rd motor connection will help you for actuator.
Logged

We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.
 

Read
« Reply #28 on: February 20, 2013, 09:13:14 AM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



@kalyan da: yes sir wan to find out the 3rd motor connection today... Sundaram sir also suggested the same way that you suggested..
Quote
Good job
Thank you sir..  Roll Eyes
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Read
« Reply #29 on: February 20, 2013, 10:03:59 AM »
romanxdsouza
Plane Lover
Forum Hero

*****

Reputation Power: 12 
romanxdsouza has no influence.
Offline Offline

City: western mumbai
State: Maharashtra
RC Skills: Advanced
Posts: 845
Join Date: Sep, 2012



yes bro we will do it,you know i alway had a hangar rat kind of model in mind like this http://www.gregcovey.com/hangar_rat.htm AND THIS i also love the way they look and move. have to do some thinking and forum reading 
Logged
 

Read
« Reply #30 on: February 20, 2013, 11:26:17 AM »
Bilal
Plane Lover
Forum Hero

*****

Reputation Power: 8 
Bilal has no influence.
Offline Offline

City: Hyderabad
State: Telangana
RC Skills: Intermediate
Posts: 546
Join Date: Mar, 2011

scratch builder and DIYer



Check this out Arun bhai,
http://www.rcindia.org/electric-planes/scratch-build-living-room-flyer/msg107396/#msg107396

I build this last year, it flew really well....i too controlled the elevator with throttle and rudder with differential thrust, but since my heli didn't have an onboard gyro hence it flew kinda erratically.......balancing the differential thrust with the trim knob is really difficult,..........but the design was really forgiving and looked great, you can try it, gimme your email I'll mail you the plans

cheers
Bilal
Logged

Cessna - 184
Mr. Moss
Self-Design Glider
550 DIY Quad
Scratch Build TriCopter
VT-Allrounder
Telemaster 400
ZMR 250
 

Read
« Reply #31 on: February 20, 2013, 11:43:00 AM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



Bilal I had seen this already and thats one of your great work i mentioned earlier..
I found the thrust is bit low when i mounted the motor in pusher config.. I am using micro quad spare props it wont work a pusher props i guess..
Any way mail me the plans let me Try once again..
arun.sreelakam@gmail.com  Thumbs Up Thumbs Up
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Read
« Reply #32 on: February 20, 2013, 12:09:59 PM »
kumardasai
Heli Lover
Forum Veteran

****

Reputation Power: 5 
kumardasai has no influence.
Offline Offline

City: Hyderabad
State: Andhra Pradesh
RC Skills: Intermediate
Posts: 275
Join Date: Sep, 2011

Perfect Landing



Hey Arun How About this one, use only one motor with gearbox, so that you can use bigger propeller and also the battery will give you more back up even and weight also will be reduced. Because adding two motors in parallel, need more precission, even one gram of weight difference in left wing side with right wing side, it will miss the balance. Correct me if i am wrong.
Logged

Blazer, Sky Surfer V3, Fun Jet, WLToys V913, WLToys V977, HiSky HCP 100S, Skyartech Wasp V3.
 

Read
« Reply #33 on: February 20, 2013, 01:11:11 PM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



@kumardasai: Wow what a timing sir just nomw finished making one.. Salute Salute
weighs 8 gms including motor prop and gears everything..
But the thrust look more than what i want need to use a smaller prop.. 4030 would be better i think..
Or will go for this itself.. Smiley
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Read
« Reply #34 on: February 20, 2013, 01:11:59 PM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



Here is the pic  Wink
bench test done and balanced already..  Thumbs Up Thumbs Up

DSC_4717.jpg
Re: diy micro flyer first attempt
* DSC_4717.jpg (32.16 KB, 800x534 - viewed 2467 times.)
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Read
« Reply #35 on: February 20, 2013, 01:14:54 PM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



gears from an old wall clock and toy parts works as bearings for prop shaft..  Giggle
Put some grease inside as lubricant..  Roll Eyes
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Read
« Reply #36 on: February 20, 2013, 01:17:02 PM »
kumardasai
Heli Lover
Forum Veteran

****

Reputation Power: 5 
kumardasai has no influence.
Offline Offline

City: Hyderabad
State: Andhra Pradesh
RC Skills: Intermediate
Posts: 275
Join Date: Sep, 2011

Perfect Landing



hey and one more thing.....Instead of using the actuator for the elevator, to reduce weight, you just use a slightly up fixed elevator, so that it will work based on the throttle speed. what do you say ? (just 5 to 10 degrees fixed elevator)
Logged

Blazer, Sky Surfer V3, Fun Jet, WLToys V913, WLToys V977, HiSky HCP 100S, Skyartech Wasp V3.
 

Read
« Reply #37 on: February 20, 2013, 01:21:47 PM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



hey and one more thing.....Instead of using the actuator for the elevator, to reduce weight, you just use a slightly up fixed elevator, so that it will work based on the throttle speed

Yes that is a great idea thanks for that sir...
But i need to add an actuator for rudder as the turning radius is very big right now...  Sad
Couldn't found the rudder motor connections in the receiver till now...  Sad
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Read
« Reply #38 on: February 20, 2013, 01:26:23 PM »
kumardasai
Heli Lover
Forum Veteran

****

Reputation Power: 5 
kumardasai has no influence.
Offline Offline

City: Hyderabad
State: Andhra Pradesh
RC Skills: Intermediate
Posts: 275
Join Date: Sep, 2011

Perfect Landing



yes, it depends on where you fly...if you are flying only indoor then you can also use the same technique for the rudder as well (slightly left or right fixed rudder), so that it will always fly in that direction only (either left or right). If it is out side then the actuator for rudder is mandatory i guess.

Can you just tell me what make/model is that heli ? because i too have some IR helis lying with me in home, but they are having tail motor attached to them. I can give some info if the make/model of your heli matches with my helis make/model.
Logged

Blazer, Sky Surfer V3, Fun Jet, WLToys V913, WLToys V977, HiSky HCP 100S, Skyartech Wasp V3.
 

Read
« Reply #39 on: February 20, 2013, 01:42:34 PM »
sundaram
FAN OF FPV FLYING, AERIAL PHOTOGRAPHY & MICRO RC
Plane Lover
Forum Hero

*****

Reputation Power: 38 
sundaram is working their way up.sundaram is working their way up.sundaram is working their way up.
Offline Offline

City: Gandhinagar
State: Gujarat
RC Skills: Advanced
Posts: 3407
Join Date: Nov, 2009



Arun I am not sure wether you came across this post.

Dear TG,

I am posting photographs of the geared power system driving a 3030 GWS props, fabricated out of the recovered 6mm coreless motor along with pinion and gears from a gear damaged 8 gms servos.

I am also posting photographs of a gear and prop arrangement for a 4mm coreless which I am waiting for.

Video link of the attempted micro alula being tried is also posted under. Thanks for watching.




http://www.rcindia.org/electric-power/converting-a-servo-motor-for-micro-rc/?action=dlattach;attach=624502;image
diy micro flyer first attempt


http://www.rcindia.org/electric-power/converting-a-servo-motor-for-micro-rc/?action=dlattach;attach=624504;image
diy micro flyer first attempt


http://www.rcindia.org/electric-power/converting-a-servo-motor-for-micro-rc/?action=dlattach;attach=624506;image
diy micro flyer first attempt


http://www.rcindia.org/electric-power/converting-a-servo-motor-for-micro-rc/?action=dlattach;attach=624508;image
diy micro flyer first attempt


Logged

 

Read
« Reply #40 on: February 20, 2013, 02:09:37 PM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



@sundaram sir: Yes sir i have already gone through this..
Currently i dont have 2 small props in same size thats why didn't go for this..
Can you suggest me a good place to get Small gws props... ? hobbyking have these?  Head Scratching
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Read
« Reply #41 on: February 20, 2013, 02:16:56 PM »
kumardasai
Heli Lover
Forum Veteran

****

Reputation Power: 5 
kumardasai has no influence.
Offline Offline

City: Hyderabad
State: Andhra Pradesh
RC Skills: Intermediate
Posts: 275
Join Date: Sep, 2011

Perfect Landing



Arun, check the below link, it may help...

http://www.hobbyking.com/hobbyking/store/__533__265__Hardware_accessories_-GWS_Style_Propellers.html
Logged

Blazer, Sky Surfer V3, Fun Jet, WLToys V913, WLToys V977, HiSky HCP 100S, Skyartech Wasp V3.
 

Read
« Reply #42 on: February 20, 2013, 02:22:21 PM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



Sir but Is that the real GWS prop for micro fliers Head Scratching Head Scratching Head Scratching..
The shaft hole looks too big..
The GWS micro plane props looks a bit different and will be very light weight..
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Read
« Reply #43 on: February 20, 2013, 02:30:33 PM »
kumardasai
Heli Lover
Forum Veteran

****

Reputation Power: 5 
kumardasai has no influence.
Offline Offline

City: Hyderabad
State: Andhra Pradesh
RC Skills: Intermediate
Posts: 275
Join Date: Sep, 2011

Perfect Landing



This may work but little costly for a micro flier !!!!!!

http://www.rcbazaar.com/products/1141-uberlite-carbon-fibre-propeller.aspx
Logged

Blazer, Sky Surfer V3, Fun Jet, WLToys V913, WLToys V977, HiSky HCP 100S, Skyartech Wasp V3.
 

Read
« Reply #44 on: February 20, 2013, 02:34:36 PM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



Yes they are... Want to check for any other source or alternatives..
Sundaram sir is not using CF props.. Think it is Glass fiber.. Any way its going to be costly.. Angry
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Read
« Reply #45 on: February 28, 2013, 06:09:22 PM »
sundaram
FAN OF FPV FLYING, AERIAL PHOTOGRAPHY & MICRO RC
Plane Lover
Forum Hero

*****

Reputation Power: 38 
sundaram is working their way up.sundaram is working their way up.sundaram is working their way up.
Offline Offline

City: Gandhinagar
State: Gujarat
RC Skills: Advanced
Posts: 3407
Join Date: Nov, 2009



Check RCdhamaka quad propeller section they had 2010 GWS style CW and counter CW

Sent from my GT-N7100 using Tapatalk 2
Logged

 

Read
« Reply #46 on: February 28, 2013, 06:26:21 PM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



Sir they have only the 2508 propeller which is what i am currently using..
checked HK all are out of stock..
I think i should go for the Rcbazaar one.. CF prop..
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Read
« Reply #47 on: February 28, 2013, 06:41:26 PM »
kumardasai
Heli Lover
Forum Veteran

****

Reputation Power: 5 
kumardasai has no influence.
Offline Offline

City: Hyderabad
State: Andhra Pradesh
RC Skills: Intermediate
Posts: 275
Join Date: Sep, 2011

Perfect Landing



Hey Arun,

Check this one, they are little low in price and i guess they are made up of with thick plastic and little heavy in weight...check with RCBazaar and ask them to give the weight details if possible. Let's first compare the both props weight (carbon fibre and ZT Model prop) and then we can proceed further.

http://www.rcbazaar.com/category/164-zt-model-spares.aspx
Logged

Blazer, Sky Surfer V3, Fun Jet, WLToys V913, WLToys V977, HiSky HCP 100S, Skyartech Wasp V3.
 

Read
« Reply #48 on: February 28, 2013, 06:54:02 PM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



Sir i bought this 2 days before the 7" one..  Sad
But which is really made for rubber powerd.. which weighs 2gms and also some difficulties while spinning... now trying to cut them and balance it properly..
Nice find sir thanks for that...  Bow Bow
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Read
« Reply #49 on: February 28, 2013, 06:57:47 PM »
arun.sreelakam
Coloring my Dreams...
Plane Lover
Forum Hero

*****

Reputation Power: 12 
arun.sreelakam has no influence.
Offline Offline

City: palakkad
State: Kerala
RC Skills: Advanced
Posts: 1678
Join Date: Sep, 2012

Fly High



The thing is that My first micro flyer flies good, the difficult part is turning, going out of signal before it gets turned. If i placed the rudder a bit turned it can make circles.. Will upload the video, let me take one..
But in case of the second one the thrust is not enough i think it is because of the prop.. What i am using is the 6030 orange props.. Sad
Logged

Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|
 

Pages: 1 [2] 3  All   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
first attempt
Beginners Zone
JKKASTA 10 6810 Last post September 16, 2010, 09:34:18 PM
by JKKASTA
diy micro flyer attempt number 2(400mm 40Mhz) « 1 2  All »
Electric Planes
arun.sreelakam 36 18984 Last post February 05, 2014, 01:22:14 AM
by johnywalker8pm
Night Vapour Clone (Homemade Micro Flyer) « 1 2  All »
Electric Planes
arun.sreelakam 45 21253 Last post February 17, 2017, 06:46:28 PM
by Ronak
My attempt to build a micro slow flyer
Electric Planes
meet2ami 7 8112 Last post July 20, 2013, 08:50:56 PM
by arun.sreelakam
Review of Aerobatic Micro Flyer Parkzone 26XP
RC Maneuvers and Skills
theleabres 0 2850 Last post October 03, 2014, 03:10:40 PM
by theleabres