|
Title: Dynam Hawk Sky (PNF) Post by: avesh on February 02, 2013, 09:10:53 PM Ordered It from rcbazaar , Building it after 10th feb -x- my GATE exams -x- .
Title: Re: Dynam Hawk Sky (PNF) Post by: avesh on February 02, 2013, 09:14:54 PM More
Title: Re: Dynam Hawk Sky (PNF) Post by: avesh on February 02, 2013, 09:17:29 PM this would be my first plane build so any thing to consider. ;D
Title: Re: Dynam Hawk Sky (PNF) Post by: Nehutech on February 02, 2013, 09:54:01 PM congrats...bro ;)
Title: Re: Dynam Hawk Sky (PNF) Post by: avesh on February 03, 2013, 10:08:15 AM read one of the hawk review and was suggested to velcro the wings, i mean how, could any one help me.
Title: Re: Dynam Hawk Sky (PNF) Post by: anandp on February 03, 2013, 10:29:46 AM Check the video below, i am also planning to do the same way for my easy star 2.
Just needed fiber reinforced tape, and some adhesive Velcro. http://www.youtube.com/watch?v=i1OxA_EbgUk Title: Re: Dynam Hawk Sky (PNF) Post by: avesh on February 03, 2013, 11:27:20 AM thanks bro, but its just velcro or glue is required for wings..
Title: Re: Dynam Hawk Sky (PNF) Post by: anandp on February 03, 2013, 11:46:06 AM Check the manual http://www.dynam-rc.com/download/hawksky.pdf .
1. If you do not have the transportation issue then you can glue the wing them fixed (i do not suggest that) or 2. Assemble the wings before flying on the field itself, in this procedure Velcro will be helpful to keep the wings on position. Title: Re: Dynam Hawk Sky (PNF) Post by: johnsonrego on February 03, 2013, 01:39:33 PM Pls check with connection polarity... I have burnt one of mine which was brand new... Mistake was done during sholdering of connectors from manufacturer...
Title: Re: Dynam Hawk Sky (PNF) Post by: avesh on February 03, 2013, 02:01:06 PM ok , johnsonrego you got it from RCB.
Title: Re: Dynam Hawk Sky (PNF) Post by: hangingtough on February 03, 2013, 06:38:18 PM Hi,
No need to glue if u can find strong magnets to be embedded They can help Title: Re: Dynam Hawk Sky (PNF) Post by: avesh on February 03, 2013, 07:05:28 PM great idea hangingtought, definately search local market.
velcro + magnet Title: Re: Dynam Hawk Sky (PNF) Post by: avesh on February 12, 2013, 11:46:52 AM build finished, magnets and velcro to hold the wings. Had a maiden today , actually my first rc plane flight with no crash and fine landings. GOt more than 20 min of flight with 2200 lipo.
Title: Re: Dynam Hawk Sky (PNF) Post by: avesh on February 12, 2013, 11:47:49 AM more
Title: Re: Dynam Hawk Sky (PNF) Post by: anandp on February 12, 2013, 11:51:17 AM good one {:)} {:)} {:)} {:)}
also will it be possible for you to post the pics of how you have done the velcro/magnet enforcement to hold wings, as that shall be helpful to implement for us too in future :) Title: Re: Dynam Hawk Sky (PNF) Post by: sanjayrai55 on February 12, 2013, 12:09:46 PM Looking good, Happy Flying ;D
Title: Re: Dynam Hawk Sky (PNF) Post by: avesh on February 12, 2013, 02:44:46 PM i have used smaller magnets, but would recommend larger ones. :thumbsup:
Title: Re: Dynam Hawk Sky (PNF) Post by: avesh on February 12, 2013, 02:56:35 PM bit about this plane..
The 1700 kv motor has enough power for takeoff's, but still would recommend hand launches. GLiding all the time at half throttle. Motor is silent. Stock prop not balanced producing nasty vibes. In a no wind condition, planes flies pretty balanced and parallel with no controls from tx. The only issue is to secure the wings with magnets, 2 10mm would just be fine along with a velcro. |