Another build after gaining some confidence with my LA stick.

plans from outerzone.co.uk. build started today.

Sofar has all the ribs cut. one wing partially built.

Wing built, partially covered, h stab completed, will complete the fuse and all other stuffs and the plane would be ready for sunday maiden.

Using sky blue and checkered scheme instead of original red black combo

Model almost done, need to put everything together.

Ashok: you should give the primary parameters of the model (span, length, weight, power system etc.) in the beginning. Otherwise it becomes difficult to envisage what you are building

Oops forgot that,

This is a plan based 3 channel trainer from outerzone website.

http://outerzone.co.uk/plan_details.asp?ID=2191

WS: 37 inches, auw 400-500gms with a 1200KV brushless  setup and 1300mah 3S lipo instead of the actual cox 0.049.

rudder only model with no ailerons. Covering is sky blue and checkered scheme instead of actual scheme.

a bit slow progress though but the fuse is coming along well so far. as of today all is completed except the servos.

with a few hours of work left, i hope she will be ready for maiden on Sunday!

Maiden video

Great Build Sir

Thanks jana ji for the video.
the Plane was a nice floater and gives a good 4 minutes of flying with 1000mah 3S lipo.
final weight around 400gms.