|
Title: epp 3d plane build for rcindia 4 th salgirah(anniversary) Post by: vineet on February 20, 2013, 06:51:49 PM not following the stock recommendations for plane
kit - reakter 3d epp servos - 3 * 9 gram , 1 metal gear motor - fc 2812 battery - not decided yet Title: Re: epp 3d plane build for rcindia 4 th salgirah(anniversary) Post by: FlyingBrick on February 20, 2013, 08:51:12 PM nice, where did you get the plane from ? I searched for a similar one but could not find it
Pls post a link here thanks Title: Re: epp 3d plane build for rcindia 4 th salgirah(anniversary) Post by: rastsaurabh on February 20, 2013, 10:10:03 PM FlyingBrick have you heard of Hobbyking.com site ???
Title: Re: epp 3d plane build for rcindia 4 th salgirah(anniversary) Post by: vineet on February 20, 2013, 10:26:23 PM i bought is from a forum friend you can buy here
http://www.hobbyking.com/hobbyking/store/__17970__Hobbyking_Reaktor_3D_EPP_800mm_ARF_.html or here but after maiden of this plane www.hobbysea.com Title: Re: epp 3d plane build for rcindia 4 th salgirah(anniversary) Post by: FlyingBrick on February 20, 2013, 11:38:49 PM Thanks Vineet,
I was looking for it in some LHS here, will wait for your maiden :) Title: Re: epp 3d plane build for rcindia 4 th salgirah(anniversary) Post by: vineet on February 21, 2013, 05:41:52 PM rudder ,elevator installed ,
just like to tell that i am using local epoxy glue (aradite , fevibond etc ) it takes time but it is good , for pasting joints quickly you can use a tiny drop ,NOT MUCH but a tiny drop of fevi quick(i used to quickly attach the ends of rudder and then used epoxy to fully fix it ) ,it works like a charm and then put the plane aside to drying epoxy glue Title: Re: epp 3d plane build for rcindia 4 th salgirah(anniversary) Post by: vineet on February 21, 2013, 05:47:55 PM dates
Title: Re: epp 3d plane build for rcindia 4 th salgirah(anniversary) Post by: FlyingBrick on March 02, 2013, 01:52:29 AM maiden videos plssss :)
|