|
Title: Extra 300s - RC power plan - customised with KFm aerofoil Post by: arunh on July 27, 2011, 10:27:24 AM My first scratch build aircraft Extra 300s, RC Power plan customised with Kfm aerofoil - Work in progress
Spec's: Wingspan: 900mm Length: 750mm Wing Area: 894.6 sq.cm Chord: root: 220mm tip:130mm Airframe weight: 194gms (w/o electronics, power plant, battery, servo etc) Proposed AUW: 410-430gms Aerofoil: Kfm Airframe: 6mm & 8mm Depron Control surfaces: Ailerons - 2 servo Elevator & Rudder - 1 servo each Propeller: 7 x 4 proposed Power plant: Motor: TBD ESC - 18A ( Turnigy plush) Battery - 1000mah ( Turnigy Nano 1000mah, 2S, 2C, 53gms ) Tx & Rx Spektrum AR500 --------------------------------------------------------------------------------- Any advice on build - covering skin; Motor/Prop etc welcome please Until the next build log Title: Re: Extra 300s - RC power plan - customised with KFm aerofoil Post by: arunh on July 27, 2011, 10:28:47 AM Few more pic's on build...
Cheers, Arun Title: Re: Extra 300s - RC power plan - customised with KFm aerofoil Post by: Swapnil on July 27, 2011, 10:43:18 AM Good Work! :thumbsup:
Will be following your thread! :) Title: Re: Extra 300s - RC power plan - customised with KFm aerofoil Post by: arunh on July 27, 2011, 07:26:09 PM Thanks Swapnil will try not to disappoint you... I wish I had time off work
Arun |