Couple of weeks before i made a 3D plane, from a plan CAP 232. Made with 4mm coro. It was a great experiance for me to built this one.
I was so thrilled when it was flown for the first test flight itself....!  Hope you people like it.


Model Video:



Test Flight:



Thanks & Regards,
Naresh.

 

Good Job Naresh ,, Nice model ..  

Thanks Budy..!

Naresh, that is a virtual twin of my Exrta 300S SPAD. The only difference is that my model is built out of 3mm Coro, as 4mm is not available here. What are your specs (dimensions) and what components have you used? Please elaborate.

BTW, thanks for not doing /demonstrating any 3D manoeuvres with the aircraft and thereby proving that a 3D design can be flown normally. I, personally, detest a plane flying like a heli.

Regards.

@naresh, remove "s" from "https" from your urls and youtube video will appear here will be easy for people to see.

@ VC: How are you doing, Thanks for your comments. About dimentions, really din't check it, i got a plan from one of the sites and just took print out and cut the coro....thatz it, However, I've used e-max motor (1560 kv aprox.),  30 amp esc, 1300mhz batery, 4 servos, 72 mhz receiver and futaba 72 mhz TX.
For the wing i've used 6mm CF road and stick with strong tape, same with tail stabilizer. motor mount i've used plywood, glue Fevititte. If any one needs the plan i can send the pdf doc., at this time i can only provide this info, if more info needed, i'll check the model and let you know.

@coderbanna:  Wow... thanks for the info about removing "S" bro. I made changes. Thank you so much.

Great plane!!!  
What is the song playing in the video?

Sir VC: Just for information, Mr. Anwar Ul Haq flied it for me. As i'm not confident in flying....;>)

Nice Build Naresh.

Rao.

Naresh its a Nice built Model and fine finish.
Also impressed by the built process in just 5 lines.( not all do that)
Would be great if you can share the Plan.
regds/Saurabh

Thanks budy, Regarding song, I've just selected from youtube video editor. 
but i like these two songs, i use these for all my videos.... i'll check what song it is...

Thanks

VC
Thanks for your comments on the test flight. I am basically a Mode I flier and since Feb this year have been compelled to fly Mode II also, that to, test flights. For the sake of Naresh I have done all the test flights for his models which are on Mode II. Naresh has been practicing on the SIM on Mode II. It takes a lot of effort for me to fly Mode II, hence no 3D on these models.
Anwar ul Haq.

This is a RC powers Extra 300 plane, that's what I build as my first 3D plane.

Here is the link

http://www.rcpowers.com/community/threads/extra-300-free.625/

Thanks
Hellyflyer

Amit@ Hellyflyer, no it's NOT an Extra 300S. The elevator and cockpit outline are different. See Reply#3. Its 'virtually' the same..........yet slightly different.

Then which one is this VC?

As he says, it is a profile CAP 232 (Gemini?). Similar yet different.............

oh ok Thanks for the clarification 

Here is something similar (with full profile fuselage) ...............

http://www.rcgroups.com/forums/showthread.php?t=1076019

Dear rastsaurabh, Hellyflyer , VC, Rao, Anwar .  Thanks for your comments. Sorry i din't check this thread as i was out of station on vacation.  Thanks for liking this.  This model has lot of inputs from RC India, indirectly.....