|
Title: first foamy rc in my workshop Post by: avishekghosh07 on February 01, 2011, 02:29:51 PM Hi! guys................
I'm Avishek from Pune. I'm going to post my new foamy rc model. Encouraged by some aeromodellers in Pune and the members from Rc India forum. So, i have made a workshop in my locality. I'm going to post my first rc model made in my workshop. Before, this model i made some balsa and ply wood engine powered aircraft. But this time i changed my view to foamy models bcoz these models are lightweight and easy to repair.Some of them are hand launched....................... Let me explain about the materials i used. Biofoam sheet (High density foam)-10mm(for fuselage), 8mm(elevator and rudder) Fevicol Decoration glue Plywood (4mm) Sand paper Here are some pics..... Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on February 01, 2011, 03:14:53 PM i'm posting the construction procedure to make this model.
for the fuselage, first cut down the 5-6 fuselage shapes(depends upon width of fuselage) from 10mm sheet. Then joined the sheets to each other with fevicol and decoration glue. After that made the stabilizers, rudder and elevator by 8mm sheet. Then rub it by sand paper for proper shape and smoothness. Then i attached the stabilizers to each other and joined with the fuselage. But one thing, the sand paper gave proper shape when i rubbed it. Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on February 01, 2011, 03:21:20 PM if you want you can try to make this model by thermo-col also. you need to use cello tape and plywood for the strength in fuselage and stabilizers.
Next time coming with some pics of wing and complete model!.............. Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on February 01, 2011, 05:40:46 PM pls post your comments and suggestions so that i could make a better model next time.
here are wing and complete model pics. Title: Re: first foamy rc in my workshop Post by: mohan on February 01, 2011, 09:16:17 PM Avishek Saab,
Where do you fly? Hadapsar? If you are into electrics do come down to Baner sometime :thumbsup: Regards, Mohan Title: Re: first foamy rc in my workshop Post by: KALYANPRODHAN on February 02, 2011, 04:41:58 AM Avshek Ghosh,
Nice shape. Where is the push rod space ? from fuselage ? Please attach picture if agreed to. Thanks ? Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on February 02, 2011, 08:37:41 AM Ok mohan! could you pls tell me the place to fly in baner? can i get your contact number?
Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on February 02, 2011, 08:40:30 AM yes... i'wll attach servos on fuselage very close to stabilizers.
Title: Re: first foamy rc in my workshop Post by: mohan on February 02, 2011, 10:15:54 AM Hi Avishek,
We fly on Satirdays and Sundays from 8am beside Pancards Club at Baner. Google maps link is http://maps.google.com/maps/ms?ie=UTF8&hl=en&msa=0&ll=18.557313,73.787055&spn=0.003723,0.007156&t=h&z=18&msid=114441572627272989343.000495036066f260bf1ab I have sent a PM with my number. Check these links also: http://www.rcindia.org/rc-events/a-night-to-remember/ http://www.rcindia.org/rc-locations-and-clubs/flying-at-baner-pune-1/ Regards, Mohan Title: Re: first foamy rc in my workshop Post by: flyrcmodel on February 02, 2011, 10:34:29 AM yah..........i already checked
nice place for flying. Thanks. Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on February 02, 2011, 12:17:38 PM Hello Mohan! you were there at Hadapsar ground with Sandeep sir......... right?
At that time we had practice for IIT sp4mm3r.................. I understood after watching the pics of baner flying ground. Title: Re: first foamy rc in my workshop Post by: mohan on February 02, 2011, 12:25:14 PM yes avishek...i fly at baner now :thumbsup:
Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on March 08, 2011, 08:22:48 PM Hi! guys........
........welcome back after a long time. finally got maiden flight of my foamy at my college ground! it was too windy, but maiden was good. here are the videos http://www.youtube.com/watch?v=N-F_aACmiwM (http://www.youtube.com/watch?v=N-F_aACmiwM) second flight was much stable than first take-off. http://www.youtube.com/watch?v=3oUYbM32JZg (http://www.youtube.com/watch?v=3oUYbM32JZg) Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on March 08, 2011, 08:32:07 PM it was such a fantastic event(Aerotech) with some flying models............................
here is the falcon............ Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on March 08, 2011, 08:44:52 PM Sharing some moments with team "FALCONS" Title: Re: first foamy rc in my workshop Post by: rohitgupta322 on March 08, 2011, 08:46:44 PM what covering material did you use?
Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on March 08, 2011, 08:54:02 PM some more pictures of the event "Aerotech 2011".
Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on March 08, 2011, 08:57:20 PM what covering material did you use? these are white & red coloured tape (normal) could be found in stationary shops.Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on March 08, 2011, 08:58:53 PM guys!
pls post ur comment for maiden flight...................... thanks...... Title: Re: first foamy rc in my workshop Post by: teja on March 08, 2011, 10:11:42 PM hey can u post the pics of the ESC and how the servos are placed!
Title: Re: first foamy rc in my workshop Post by: ujjwaana on March 08, 2011, 11:19:09 PM @avishekghosh07
Is the SU-27 in the last pic a static model or flying one ? it looks fantastic! Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on March 08, 2011, 11:19:46 PM ESC is placed at the front end(nose compartment) and servos are placed very closed to the stabs.
Title: Re: first foamy rc in my workshop Post by: avishekghosh07 on March 08, 2011, 11:21:35 PM the SU-27 is the static model. it was just for the presentation.
|