Title: FMS G600 Hand Launch Glider -- R/C conversion Post by: AnjanBabu on May 22, 2016, 10:42:18 AM I had been wanting to do a R/C conversion of the Multiplex Fox before the FMS G600 caught my eye, I mostly went for it because it comes with an extra bit of wingspan over the Fox and expected it to fly like a micro floater. Although, my setup ramped up the wing loading a tad bit more than I originally planned for and it doesn't really "float", but it does have a decent glide slope.
Electronics: Hextronik 10g brushless outrunner Mantis 8A ESC Thunder Power 2S 325mAh 70C / WolfPack 2S 300mAh 25C HXT500 servos DM4F DMSS 4Ch Rx 4.75x4.75E prop / 5x3SF prop AUW 120-135g I reinforced the under belly with a couple of 1mm carbon rods glued in place since it was flexing quite a bit from the electronics cavity that is made after a few bad landings. I prefer the TP325 with 4.75x4.75E prop because it lets me pull out of steep dives quickly. Flies real nice even with a lot of wind for it's size, flight times range between 8-10mins. Title: Re: FMS G600 Hand Launch Glider -- R/C conversion Post by: AnjanBabu on May 22, 2016, 10:43:55 AM ...
Title: Re: FMS G600 Hand Launch Glider -- R/C conversion Post by: AnjanBabu on May 22, 2016, 10:46:02 AM ...
Title: Re: FMS G600 Hand Launch Glider -- R/C conversion Post by: AnjanBabu on May 22, 2016, 10:48:07 AM ...
Title: Re: FMS G600 Hand Launch Glider -- R/C conversion Post by: AnjanBabu on May 22, 2016, 11:59:24 AM https://youtu.be/ykNW4JsZWWs
Title: Re: FMS G600 Hand Launch Glider -- R/C conversion Post by: johnywalker8pm on May 24, 2016, 12:33:40 PM {:)}
|