RC India

RC Models => Electric Planes => Topic started by: RCSCRATCHBUILDER on April 03, 2015, 12:42:01 PM



Title: FT Flyer Build(& Flight)
Post by: RCSCRATCHBUILDER on April 03, 2015, 12:42:01 PM
Here's the specs-
hextronik 24 g 1300kv outrunner
10 amp esc
2s 900 mah lipo
9 g servos
rcb6i
8*4 prop(should i use a 9*5 ???)
auw-300g
Gonna maiden it today


Title: Re: FT Flyer Build(& Flight)
Post by: Ahmad Ilyas on April 03, 2015, 02:35:22 PM
its looking cool
try it up with ailerons and large wings


Title: Re: FT Flyer Build(& Flight)
Post by: Ahmad Ilyas on April 04, 2015, 10:58:32 AM
what motor and esc you use in your mini scout


Title: Re: FT Flyer Build(& Flight)
Post by: RCSCRATCHBUILDER on April 04, 2015, 01:34:11 PM
emax gt2203( though i suggest a  1806 2280kv from quadkopters) and hk 10 amp esc :)


Title: Re: FT Flyer Build(& Flight)
Post by: Pradyumna Hatwar on April 04, 2015, 04:26:08 PM
A 9*4.5 seems to be more appropriate for your plane ....
Moreover ... you could have made it cheaper
Wish you luck for your maiden flight


Title: Re: FT Flyer Build(& Flight)
Post by: RCSCRATCHBUILDER on April 05, 2015, 08:53:26 AM
sir will hte 9 4.5 burn the 10 amp esc
how could i have made it cheaper
thank you


Title: Re: FT Flyer Build(& Flight)
Post by: Ahmad Ilyas on April 05, 2015, 03:45:07 PM
thanks sir
but where can i get hk 10 amps esc


Title: Re: FT Flyer Build(& Flight)
Post by: RCSCRATCHBUILDER on April 05, 2015, 06:41:51 PM
U can find it on hobbysea


Title: Re: FT Flyer Build(& Flight)
Post by: vibranthobbies on April 05, 2015, 06:59:02 PM
Check here for 10 Amp ESCs
http://www.vibranthobbies.com/planes-parts/speed-controllers/hobbyking-escs.html/?vh_esc_current=187 (http://www.vibranthobbies.com/planes-parts/speed-controllers/hobbyking-escs.html/?vh_esc_current=187)


Title: Re: FT Flyer Build(& Flight)
Post by: eternalshenron on April 18, 2015, 12:42:15 PM
What material did you use for the firewall? Everytime I fly my Flyer, I either end up breaking a firewall (Acrylic) or a prop  :(
Also where can I find the suitable wire for making the landing gears?


Title: Re: FT Flyer Build(& Flight)
Post by: SK1701 on April 18, 2015, 01:40:36 PM
For the firewall I have successfully used copper clad board that is used in making PCBs


Title: Re: FT Flyer Build(& Flight)
Post by: profoundr on April 18, 2015, 09:48:21 PM
can send pics how you made the fuselage


Title: Re: FT Flyer Build(& Flight)
Post by: aman1256 on April 20, 2015, 10:20:00 AM
Hello Everyone,
Nice Plane :)
Regards,
Aman.