RC India
Welcome Guest, please login or register.
 
Pages: 1 2 3 4 [All]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: November 04, 2014, 02:56:03 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011




Saw FT STORCH swappable plane and decided  to build one.
Plans can be found here http://flitetest.com/articles/ft-simple-storch-build

As there is no access to dollar tree Foam board, I have made the entire plane with 6mm Depron with packing tape on one side.

First the most important,the POWER POD. As it can be used on other series of plane,to make it strong I have build this with coro. Instead of ply I have used 6mm MDF sheet for motor mount.

Electronics used
1- Dt 750 bell motor  
1- 50amp ESC
2- 10*6 prop
4- 9gm servos
4- servo extensions




001.jpg
FT STORCH build
* 001.jpg (47.73 KB, 800x600 - viewed 3077 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
« Last Edit: November 04, 2014, 05:49:16 PM by manojswizera » Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #1 on: November 04, 2014, 03:00:08 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Wings made according to the plans , with crease and folded to make airfoil.
 As the wing is little bigger to gave it strength, used some wooden spars.

01.jpg
Re: FT STORCH build
* 01.jpg (33.92 KB, 800x600 - viewed 2995 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #2 on: November 04, 2014, 03:03:55 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Fuse is made with two pieces to give similar elevated look as of the original plane.
Tail is attached to the fuse.

07.jpg
Re: FT STORCH build
* 07.jpg (40.25 KB, 800x600 - viewed 2859 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #3 on: November 04, 2014, 03:06:23 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Used small plastic card so that while attaching the wings the bamboo skewers should not tear the foam.
Power pod attached with help of skewers and spokes.

11.jpg
Re: FT STORCH build
* 11.jpg (26.11 KB, 600x800 - viewed 3098 times.)
This post has 2 more images(s)/attachment(s). Please login or register to view them.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #4 on: November 04, 2014, 03:09:01 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Nearly Completed plane. Just waiting for paint scheme.

15.jpg
Re: FT STORCH build
* 15.jpg (34.13 KB, 800x600 - viewed 2901 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #5 on: November 05, 2014, 12:27:04 PM »
sanjayrai55
Plane Lover
Forum Hero

*****

Reputation Power: 85 
sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.
Offline Offline

City: Gurgaon
State: Haryana
RC Skills: Intermediate
Posts: 8337
Join Date: Dec, 2011

Don't wake a Tiger until you've factored the teeth



Excellent build Manoj!  Clap Clap Clap

What a wonderful idea, using corro for the swappable power pod! One problem with depron/foamboard/biofoam is the material tears fast, especially where the skewers fit.

What a shame too, that at least 40 people have viewed this thread, and not even a single selfish soul bothered to leave a comment. RC Indian Cattle?    Violent Angry Angry : Roll Eyes
« Last Edit: November 05, 2014, 02:00:10 PM by sanjayrai55 » Logged

 

Read
« Reply #6 on: November 05, 2014, 12:38:55 PM »
Nithinraj Kotian
Living in my Dreams
Plane Lover
Forum Hero

*****

Reputation Power: 6 
Nithinraj Kotian has no influence.
Offline Offline

City: Mangalore and Dubai
State: Karnataka
RC Skills: Beginner
Posts: 592
Join Date: Aug, 2011



nice build Manoj  Clap  Clap  waiting for maiden Video  Thumbs Up  Hats Off
Logged

Life is Simple Don't Make it Complicated
 

Read
« Reply #7 on: November 05, 2014, 12:53:55 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Thank you Nithinraj and sanjay sir.

Sanjay sir, you always inspire me, During my entire build,i was thinking,you must have also faced same hurdles during your Babyblender.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #8 on: November 07, 2014, 12:39:32 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Here is the maiden video.
Flew beautifully,once trimmed.Fly real slow.
Once in the air, was flying at 30% throttle. Also glide well on throttle cut.
Have a tendency, to gain altitude on increasing throttle. may be i have to decrease some wing incidence.

Over all, great experience, Highly recommend for beginners.

https://www.youtube.com/watch?v=M0TABidp9W0&feature=youtu.be

Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #9 on: November 07, 2014, 01:10:18 PM »
sanjayrai55
Plane Lover
Forum Hero

*****

Reputation Power: 85 
sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.
Offline Offline

City: Gurgaon
State: Haryana
RC Skills: Intermediate
Posts: 8337
Join Date: Dec, 2011

Don't wake a Tiger until you've factored the teeth



Smooth flier. Congratulations Smiley
Logged

 

Read
« Reply #10 on: November 07, 2014, 01:55:59 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Thank you sir
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #11 on: November 07, 2014, 03:56:07 PM »
sahilkit
LOVE MICRO RC
Plane Lover
Forum Hero

*****

Reputation Power: 18 
sahilkit has no influence.
Online Online

City: Hyderabad
State: Telangana
RC Skills: Beginner
Posts: 1533
Join Date: Mar, 2009

MICROSTAR 2000



Hi manoj,

The plane flew nice, what is the AUW of model and you used only clear tape for construction or any hot glue ?
Logged

Today might be a great and wonderful day. It depends on you.
 

Read
« Reply #12 on: November 07, 2014, 07:49:47 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Thanks sahil,
AUW is 930 gms, i have used clear tape on one side of depron. Because we don't have paper coated dollar tree foam board. Have used hotglue all over in the build.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #13 on: November 13, 2014, 05:46:49 PM »
b4ggu
Plane Lover
Forum Hero

*****

Reputation Power: 7 
b4ggu has no influence.
Offline Offline

City: Leicester, UK
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 520
Join Date: Apr, 2009

To all my friends "HAPPY LANDINGS"....



Nice build Manoj.... we have a couple of these out of 6mm Depron on our field. They have painted it with normal household emulsion paint. I use Depron regularly and cover with packaging tape. Another idea to keep your pod strong is use plasterboard joining tape (Scrim tape inside and coat it with pva) the skewers/ dowels will not let the depron rip. Fellow fliers have used the clear re-inforced tape on the sheet first and then cut out the part.
Logged
 

Read
« Reply #14 on: November 14, 2014, 11:15:06 AM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Thank you deepak sir,
i haven't put a color scheme yet. Planning to apply radium sheet.
Surely will try scrim tape next time.
Actually i have used small plastic cards, Hot glued them, and passed the skewers through them. Its holding well without tearing the Foam during rough landing.
I also use same technique of apply clear tape and then cut out the parts.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #15 on: November 14, 2014, 09:58:06 PM »
manu
Plane Lover
Forum Veteran

****

Reputation Power: 4 
manu has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 261
Join Date: May, 2011



nicely crafted.
Logged

even crashing requires a flight......
 

Read
« Reply #16 on: November 14, 2014, 10:21:47 PM »
VC
Boat Lover
Forum Hero

*****

Reputation Power: 64 
VC is a rising star!VC is a rising star!VC is a rising star!VC is a rising star!VC is a rising star!VC is a rising star!
Offline Offline

City: Guwahati
State: Assam
RC Skills: Beginner
Posts: 5598
Join Date: Nov, 2009

L'enfant Terrible du RCIndia



Manoj, first - Congrats! And thereafter, I have a few requests-

Please incorporate the fixed undercarriage, wing struts and Luftwaffe markings - then and only then will she be a true Storch!
Logged

Growing old is mandatory, growing up is optional!
 

Read
« Reply #17 on: November 14, 2014, 11:09:41 PM »
prashant_rc
glider
Plane Lover
Forum Veteran

****

Reputation Power: 4 
prashant_rc has no influence.
Offline Offline

City: kalyan
State: Maharashtra
RC Skills: Intermediate
Posts: 277
Join Date: Oct, 2011



Nice built manoj, congrats

what mah battery u have used in this plane, coz with depron no hard landings are permitted  Clap
Logged
 

Read
« Reply #18 on: November 15, 2014, 10:48:22 AM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



@manu -  Thanks buddy
@Vc sir  - As i detach the wings after every flying, i had not add struts to fuse.
              Sure will add undercarriage,was little afraid as hard landings with undercarriage will tear the   
              Foam.
@ prashant-  I had apply some hot glue to the nose underpart, for those belly landings. Was also worried
                  while landing, but the plane landed very slowly,thanks to its huge wingspan and 
                 flaperons,they really slow down the plane.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #19 on: November 15, 2014, 11:41:34 AM »
kiran rc
Plane Lover
Forum Hero

*****

Reputation Power: 21 
kiran rc barely matters.kiran rc barely matters.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 1260
Join Date: Feb, 2013

Live your dream and wear your passion



Nice build sir Cheesy
Logged
 

Read
« Reply #20 on: November 15, 2014, 06:06:07 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Thanks Kiran
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #21 on: November 16, 2014, 09:05:46 AM »
taitil
Plane Lover
Forum Veteran

****

Reputation Power: 4 
taitil has no influence.
Offline Offline

City: Bardoli
State: Gujarat
RC Skills: Beginner
Posts: 286
Join Date: Mar, 2012

I Love Flying



Very smooth, slow and stable flying Manojbhai.
Great build and nice maiden.  Bow Bow
Logged
 

Read
« Reply #22 on: November 25, 2014, 11:56:41 AM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Thanks Taitil bhai.
Here are few pics of Storch from Birds eye
 have to resize, it kills the quality of pics  Bang Head

01.jpg
Re: FT STORCH build
* 01.jpg (37.1 KB, 640x360 - viewed 2613 times.)
This post has 2 more images(s)/attachment(s). Please login or register to view them.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #23 on: November 25, 2014, 12:54:10 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012



That first picture is great.
Worth printing and framing!

(Time to incorporate VC sir's suggestions...)
Logged
 

Read
« Reply #24 on: November 25, 2014, 01:10:26 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Thanks Iyer sir.
will surely do so .
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #25 on: June 22, 2015, 07:07:33 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



as suggested by VC sir and iyers sir.

001.jpg
Re: FT STORCH build
* 001.jpg (32.33 KB, 800x527 - viewed 2015 times.)
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #26 on: June 23, 2015, 12:04:02 AM »
b4ggu
Plane Lover
Forum Hero

*****

Reputation Power: 7 
b4ggu has no influence.
Offline Offline

City: Leicester, UK
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 520
Join Date: Apr, 2009

To all my friends "HAPPY LANDINGS"....



Wow Manoj.. that paint job looks really nice.. You will be able to spot it miles away too..
And the crosses...

Well Done!     :0 )

What did you use to paint it ? Is it house hold emulsion or acrylic paint? I havent tried using any of them even though my friends at the club do it all the time.

I use packaging tape to cover all my Depron and Coro planes.

Depron becomes very strong once covered.

As you have done, I cover it in white first and then apply other colours on top ... You can even apply heat activated film if you do it carefully..

I was just thinking you mentioned that when you speed up or throttle up, the plane tends to climb..


I had that issue with my D & A midwinger.

It could also mean that its a bit tail heavy still..

Though it is balancing on your fingers, if you try to balance it on a true C &G scale, it will turn out slight tail heavy I think.

 I added some nose weight and my plane is perfect now.. You may want to try that???

Happy flying..
Deepak

PackagingTapeLamination.jpg
Re: FT STORCH build
* PackagingTapeLamination.jpg (56.48 KB, 600x800 - viewed 1935 times.)
Logged
 

Read
« Reply #27 on: June 23, 2015, 10:33:50 AM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Thank you Deepak sir.
The yellow is painted by locally available paint cans. The red one is packing tape.cut to give crosses. white is the depron colour itself.
sir i use the same technique of covering the depron with packing tape,as you have shown in the pic, it hold the depron strong and prevents tearing.

You are right sir,the plane was tail heavy. and the angle of incidence was also little high.
i am now converting it to twin engine, for fpv.


1.jpg
Re: FT STORCH build
* 1.jpg (25.62 KB, 800x600 - viewed 1887 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #28 on: June 23, 2015, 10:45:48 AM »
sanjayrai55
Plane Lover
Forum Hero

*****

Reputation Power: 85 
sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.
Offline Offline

City: Gurgaon
State: Haryana
RC Skills: Intermediate
Posts: 8337
Join Date: Dec, 2011

Don't wake a Tiger until you've factored the teeth



Great build Manoj. Looking to see the video of the twin Wink
Logged

 

Read
« Reply #29 on: June 23, 2015, 04:18:37 PM »
b4ggu
Plane Lover
Forum Hero

*****

Reputation Power: 7 
b4ggu has no influence.
Offline Offline

City: Leicester, UK
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 520
Join Date: Apr, 2009

To all my friends "HAPPY LANDINGS"....



Would be nice to see it flying as Sanj says...  Let us know.

How did you mount the motors on the wing?


You might want to strengthen that area by some scrim tape.. (See image)

Apparently Emax do a speed controller for Quad Copters that can handle two motors.....

You might be able to save some weight there if you were to use one of those.

See if RCD or Vivek at "Sharma Model Aero & Props" have one in stock??

Deepak

D.A.4.jpg
Re: FT STORCH build
* D.A.4.jpg (94.99 KB, 478x800 - viewed 1285 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged
 

Read
« Reply #30 on: June 23, 2015, 10:34:28 PM »
GForce1980
Car Lover
Active Member
**

Reputation Power: 1 
GForce1980 has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 11
Join Date: Apr, 2015



Beautiful build
Logged
 

Read
« Reply #31 on: June 24, 2015, 09:52:37 AM »
prabal276
In the Air
Plane Lover
Forum Hero

*****

Reputation Power: 15 
prabal276 has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Intermediate
Posts: 1417
Join Date: Mar, 2013

One step at a time :)



well done...
the storch is next in my "to - build list"
Logged
 

Read
« Reply #32 on: June 24, 2015, 09:55:23 AM »
prabal276
In the Air
Plane Lover
Forum Hero

*****

Reputation Power: 15 
prabal276 has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Intermediate
Posts: 1417
Join Date: Mar, 2013

One step at a time :)



you may want to see my ft old fogey build thread....
it flies great and will post video shortly...
once again good job on the storch... why dont you add a bomb drop like the ones ft installed?
it would be fun
Logged
 

Read
« Reply #33 on: June 24, 2015, 10:24:36 AM »
sanjayrai55
Plane Lover
Forum Hero

*****

Reputation Power: 85 
sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.
Offline Offline

City: Gurgaon
State: Haryana
RC Skills: Intermediate
Posts: 8337
Join Date: Dec, 2011

Don't wake a Tiger until you've factored the teeth



It is illicit to use a RC Model for dropping anything, except with prior permission. Chances of misuse are too high

This is a voluntary restriction put forth by AMAI (amai.in)
Logged

 

Read
« Reply #34 on: June 25, 2015, 03:08:29 PM »
prabal276
In the Air
Plane Lover
Forum Hero

*****

Reputation Power: 15 
prabal276 has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Intermediate
Posts: 1417
Join Date: Mar, 2013

One step at a time :)



ok..
but dropping breakfast was a good idea...Cheesy
Logged
 

Read
« Reply #35 on: June 28, 2015, 04:55:02 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Sorry for late reply
Thanks friends.
Deepak sir, will search for scrim tape for sure. I have used two same A rating, same manufacturer esc . Motor emax cf28212 1200 kv.
posting some pics of motor mount

I have flown this twin setup two days back, it flew very good , some what fast,due to its weight(1.3 kg) and 1200kv setup.
during a sharp turn , the rubber band broke in between and if fell down. the tail broke, rest is reparable.

001 (2).jpg
Re: FT STORCH build
* 001 (2).jpg (29.05 KB, 800x600 - viewed 1761 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #36 on: July 31, 2016, 01:50:09 PM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Hello Manoj,
I'm new to the hobby already broke one F22 as i was not able to get into the air (config was Emax 2822 1200kv outrunner, 30A ESC, 1250mah lipo, 9gram servo, 9060 prop).

Now, building FT simple Storch but not sure which motor to use. As they have suggested Suppo 1250kv but I'm not able find here in india.
Can you please help me where to buy it and also please share all required electronics with what we can easily fly this plane as this plane will be trainer plane for me.

Thank you,
Faiz
Logged
 

Read
« Reply #37 on: July 31, 2016, 01:58:34 PM »
prabal276
In the Air
Plane Lover
Forum Hero

*****

Reputation Power: 15 
prabal276 has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Intermediate
Posts: 1417
Join Date: Mar, 2013

One step at a time :)



Can get a similar motor.
Same wattage and same kv out there.
Logged
 

Read
« Reply #38 on: July 31, 2016, 02:03:16 PM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Will Simple storch fly with Emax 2822 1200kv ? As weight will be around 1.8lb (approx 800grams) and motor generates max thrust of 650grams.
Logged
 

Read
« Reply #39 on: July 31, 2016, 10:42:12 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Hi Faiz
first of all, if your are new to the hobby, F22 was not a good choice.
Ft STORCH is the right one for you now.surely go with it. its very easy to fly and it glides very well.

Emax CF 2822 wont be good for this plane. I suggest you to go for Dt 750, with 11 inch prop. for some reasons.
It has good 1000 gm thrust, it has low rpm so you can fly slowly,and learn on this plane.
Best of luck. for your build.


Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #40 on: July 31, 2016, 10:52:20 PM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Hello Manoj,
Thank you so much for your quick reply.
I'm done with the cuttings on depron and soon going to joint all the parts.
Manoj can you please share the link where and which motor to buy even with no. and codes I'm totally new and from totally different background.
Also please share where did you get this paint sticks for the wings.

Many thanks,
Faiz
Logged
 

Read
« Reply #41 on: August 01, 2016, 02:25:30 AM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Manoj one more thing,
Will this dt750 work fine with 30A esc and 1250mah battery?
Because i already have 30A esc and 1250mah battery.

I'm thinking to replace the landing gear of Storch with Bushwacker's landing gear as it looks very nice, should i go for the relacement of landing gear or not ?

Please do share your suggestions...
Logged
 

Read
« Reply #42 on: August 01, 2016, 12:57:11 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Dt 750 will be more than ok with 30amp ESC, as it takes less current.
but you should go for a bigger lipo.  1250 is less, at least go for 2200 mah 3S lipo.

one more thing. Try to reduce weight from tail section, if possible.
Because you will surely end with tail heavy plane. and for CG balancing you will need haeay lipo, 1250 is way lighter.

for landing gear, if you can fix it, its not a issue. use it.

Do share some build pics.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #43 on: August 01, 2016, 02:15:51 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012



@faiz.kadri,
Here is some data for your consideration:

You expect AUW of about 1.8lb/800gms.
I presume your wing size will be around 48x8". Or about 2.67sqft
That will give you a wing loading of around 11oz/sqft.

A model of this size and wing loading will fly like a trainer on power loading of 50watts/lb, or say 90w.

I had run some tests on a DT750 two years ago. Using an 11x5.5 EMP prop, one of the data points was 7.5amps/ 12.25v/ 92w/ 600gms thrust.
This should be adequate for your model.

At 7.5amps, 10minutes will consume 1250mah.
So your 1250 mah lipo should be safe for 5 minutes flying.
(I presume it is 3cell, not 2cell)

I didn't note the rpm with this prop, but my notes show 5900rpm at 9amps/ 105w on an 11x7.
I guess the 11x5.5 will do about 6000rpm at ~7-8amps.
That should give you airspeed of 40-50kmph, about right for such a model flying at half throttle!

Hope this helps. Best of luck.
Logged
 

Read
« Reply #44 on: August 01, 2016, 02:34:07 PM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



@Manoj, Thank you so much for your help. Definitely will share the pics once i complete with building and fitting the electronics.
Manoj where did you get the paint sticks ? I have searched alot but not able to get it.

Also there's 3 option with whom this Storch can be configured - 1) Simple Aileron (using Y cable) 2) Flappron (independent channel) 3) combination of Aileron and flapps.

Which one i should go for ??

@K K Iyer,
Thank you for your assistance, but I'm from totally different background (belongs to finance Cheesy) but this is my hobby and love to do this stuffs. These numbers and calculations will jargon for me right now as am new to this hobby.

But sure will increase my knowledge as much as i can...

Thank you so much again for the help on this...

Regards,
Faiz
Logged
 

Read
« Reply #45 on: August 01, 2016, 05:09:07 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012



@faiz.kadri,
Oops.
All it means is that the motor will be able to fly the model using about half throttle, and that you battery will last about 5 minutes before needing recharge!
Hope this sounds better Grin
Regards
Logged
 

Read
« Reply #46 on: August 01, 2016, 08:20:42 PM »
b4ggu
Plane Lover
Forum Hero

*****

Reputation Power: 7 
b4ggu has no influence.
Offline Offline

City: Leicester, UK
State: OUTSIDE INDIA
RC Skills: Intermediate
Posts: 520
Join Date: Apr, 2009

To all my friends "HAPPY LANDINGS"....



Very nice explanation there KK sahib...Smiley
Logged
 

Read
« Reply #47 on: August 01, 2016, 08:30:16 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012



@b4ggu,
PM sent!
Logged
 

Read
« Reply #48 on: August 01, 2016, 08:51:20 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



@Manoj, Thank you so much for your help. Definitely will share the pics once i complete with building and fitting the electronics.
Manoj where did you get the paint sticks ? I have searched alot but not able to get it.

Also there's 3 option with whom this Storch can be configured - 1) Simple Aileron (using Y cable) 2) Flappron (independent channel) 3) combination of Aileron and flapps.

Which one i should go for ??

very well explained by iyer sir, with dt 750 you can cruise for half throttle.

The paint is just using color tape. which you get in stationary store.
As you are new, just go for aileron with y cable. IF you are have more free channels, you can go for flaperons also. i have used flaperons
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #49 on: August 01, 2016, 09:07:21 PM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



@Manoj, not paint but I'm asking about the wooden sticks that you have used to joint wings for reinforcement.

Also please share how to configure flappron and only ailerons.

I have Avionix TH9B from Rcbazaar. How to configure it on this transmittor?


Thank you,
Faiz
Logged
 

Read
« Reply #50 on: August 02, 2016, 05:41:10 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



In the middle use ''wooden scale'' piece. and at the sides i have used wooden dowels, ( motor repairing guys stock them.)

i don't know much about your TX, but surely there must be an option of  ''flaperon''.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #51 on: August 02, 2016, 06:37:37 PM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Thank you Manoj, will find2-3 wooden scales...

Manoj is there any settings that we can do to reduce the servo response time because when i was flying f22 it was so responsive that even with a little touch and vibration servo started reacting alot.

I have ordered hextronix dt750 yesterday the seller confirmed it won't come with bullet connectors so will have to solder it but not able to find bullet connectors as its out of stock everywhere.

Logged
 

Read
« Reply #52 on: August 02, 2016, 07:11:11 PM »
prabal276
In the Air
Plane Lover
Forum Hero

*****

Reputation Power: 15 
prabal276 has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Intermediate
Posts: 1417
Join Date: Mar, 2013

One step at a time :)



Try for bullets from rchyper or eBay.in
Use exponential for your controls will reduce the response rate.
Regards.
P.s have you gone through the manual
Logged
 

Read
« Reply #53 on: August 02, 2016, 07:21:28 PM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Thank you Prabal,
They have not provided manual but will check the Exponential setting.

Let me complete the building will share the pics and if i get stuck anywhere will inform you to help me out. 😊😊

Thanks alot guys @ Mnoj, Prabal, KK Iyer I really appreciate your help 👍👍

Thank you,
Faiz
Logged
 

Read
« Reply #54 on: August 02, 2016, 07:23:08 PM »
prabal276
In the Air
Plane Lover
Forum Hero

*****

Reputation Power: 15 
prabal276 has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Intermediate
Posts: 1417
Join Date: Mar, 2013

One step at a time :)



Ok, best of luck
Check on the webpage of the model.
There may be a downloadable manual.
If not, contact the store
Logged
 

Read
« Reply #55 on: August 03, 2016, 01:19:49 AM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Yo !! I got the Manual...😆😆😆
Even i have found 11×5.5 Propeller and ordered the same (Below Pic). Will this prop be fine for Simple storch ??

Pic.jpg
Re: FT STORCH build
* Pic.jpg (65.62 KB, 800x617 - viewed 1819 times.)
Logged
 

Read
« Reply #56 on: August 03, 2016, 01:23:43 AM »
vibranthobbies
Plane Lover
Forum Veteran

****

Reputation Power: 5 
vibranthobbies has no influence.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 340
Join Date: Jun, 2014

With your trust We grow !




I have ordered hextronix dt750 yesterday the seller confirmed it won't come with bullet connectors so will have to solder it but not able to find bullet connectors as its out of stock everywhere.

Connectors available here;
http://hobbysea.com/products.php?53&cPath=20&sid=5a2d33dd4fcc613d1f6ba73b8e13a6a6
Logged

 

Read
« Reply #57 on: August 03, 2016, 01:34:12 AM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Will this (APC 11×5.5) prop be fine or 11×7 slow fly??
Logged
 

Read
« Reply #58 on: August 03, 2016, 06:24:32 AM »
prabal276
In the Air
Plane Lover
Forum Hero

*****

Reputation Power: 15 
prabal276 has no influence.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Intermediate
Posts: 1417
Join Date: Mar, 2013

One step at a time :)



Can't comment.
I think the x7 will have a higher pitch speed than the x5.5 in the air. I.e the x7 will be faster.
Go for the 11x5.5
Let others speak, I am not so sure about the knowledge I have.
Regards
Logged
 

Read
« Reply #59 on: August 03, 2016, 10:57:26 AM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Faiz 11x 5.5 will be better, slow flying ans stability is what you want in your current model.

APC props are stronger, but be sure to order some extra pairs of the props.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #60 on: August 03, 2016, 11:59:27 AM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



For now i have ordered APC 11×5.5 from vertexRC, the cost is 3 times the normal prop's price (Rs.329).
I already have 9050 and 8x6 (slow fly) props but not sure whether these props will able to fly or not...
Logged
 

Read
« Reply #61 on: August 12, 2016, 10:25:26 PM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Hello Manoj,

Please see attached Pics of my Storch build (Not completely done but thought to share).

IMG-20160812-WA0002.jpg
Re: FT STORCH build
* IMG-20160812-WA0002.jpg (26.13 KB, 412x800 - viewed 1716 times.)
This post has 2 more images(s)/attachment(s). Please login or register to view them.
Logged
 

Read
« Reply #62 on: August 12, 2016, 11:01:12 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012



@faiz.kadri,
Excellent work  Clap
Please consider adding some dihedral. Say 5-6degrees each side.
Believe me it will save you a lot of headaches when you fly it...
Best of luck.
Logged
 

Read
« Reply #63 on: August 12, 2016, 11:07:23 PM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Thank you Bro..!!
Actually not getting enough time on this...
I have just finished wing today morning, definitely will add dihedral.

How much max weight storch can fly with dt750, 11×5.5 prop and 2200 (3cell) mah ?
Logged
 

Read
« Reply #64 on: August 12, 2016, 11:37:54 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012



How much max weight storch can fly with dt750, 11×5.5 prop and 2200 (3cell) mah ?

For a reasonable answer to that,
You have to tell us the wing span and chord, ie, area
And post a side on pic of the aerofoil.
Depends on the wing loading, you see...

But i'd expect this motor/prop/lipo combo to fly an 800-1000gm model easily.
(If it was below about 12oz/sqft  Grin)

Logged
 

Read
« Reply #65 on: August 13, 2016, 10:27:40 AM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



Faiz the model is looking beautiful,
as said by iyyer sir, add some dihedreal,
for weight , dont worry much about weight, if you going with the plan , you will be under 1 kg. if it goes to 1.2 kg then also dt 750 will fly this model easily.
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #66 on: August 13, 2016, 11:36:07 AM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Thank you Manoj 😊😊😊
Yup i will add dihedral to the wing today...
I just thought to share the pics, I will post more pics once i get this Storch complete. 😊😊
Actually i was planning to put hobbyking 9 Mode LED strip. (I already have it) but sticking on the wing and fuselage to the tail it will require some soldering and it would add more weight...
Logged
 

Read
« Reply #67 on: August 14, 2016, 05:56:02 PM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Hi Manoj/ Iyyer Sir,
everything is done, making my power pod ready...
Can you please help me to set this power pod up, 1) Motor rotation clockwise or anti clockwise and 2) propeller position Number facing front or rear ??

IMG-20160814-WA0001.jpg
Re: FT STORCH build
* IMG-20160814-WA0001.jpg (28.35 KB, 800x450 - viewed 1687 times.)
Logged
 

Read
« Reply #68 on: August 14, 2016, 09:07:31 PM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



And also things that needs to keep in mind before first take off...
I mean how to take off and how would be landing..!!
Little nervous as tomorrow gonna fly this Storch and having bad experience with F22 raptor making me scared 😖
Logged
 

Read
« Reply #69 on: August 21, 2016, 11:24:52 AM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Logged
 

Read
« Reply #70 on: August 21, 2016, 11:27:42 AM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Maiden today....
Thank you guys for the assistance and of course Sandeep Sir who help me today to get this beauty in to Air 🙌 Bow
Logged
 

Read
« Reply #71 on: August 21, 2016, 05:40:48 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



its most happiest moments , when your efforts and hardwork, flies in the air.

Congratulations. Clap
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #72 on: August 21, 2016, 05:45:40 PM »
sanjayrai55
Plane Lover
Forum Hero

*****

Reputation Power: 85 
sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.sanjayrai55 is a force to reckon with.
Offline Offline

City: Gurgaon
State: Haryana
RC Skills: Intermediate
Posts: 8337
Join Date: Dec, 2011

Don't wake a Tiger until you've factored the teeth



 Clap Clap Clap

 Good job
Logged

 

Read
« Reply #73 on: August 21, 2016, 06:41:19 PM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Thank you Sanjay... 😊😊😊
Logged
 

Read
« Reply #74 on: August 21, 2016, 06:45:01 PM »
Faiz.kadri
Plane Lover
Active Member
**

Reputation Power: 1 
Faiz.kadri has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 35
Join Date: Jul, 2016



Thank you Manoj...

Very true, it was really awesome experience and happiest moment for me, thanks again for guiding me in my build...

Credit goes to Sandeep Sir who help me today, will learn flying from him
Logged
 

Read
« Reply #75 on: August 24, 2016, 12:05:34 PM »
samayaraj
Plane Lover
Senior Member
***

Reputation Power: 2 
samayaraj has no influence.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 124
Join Date: Oct, 2011



Congrats fliers  Clap Clap
Logged
 

Read
« Reply #76 on: August 25, 2016, 08:22:16 AM »
wingmanbunty
BORN TO FLY FORCED TO WORK
Plane Lover
Forum Hero

*****

Reputation Power: 7 
wingmanbunty has no influence.
Offline Offline

State: Rajasthan
RC Skills: Beginner
Posts: 532
Join Date: Nov, 2013



 Good job
Logged

EAT ,SLEEP , FLY
 

Read
« Reply #77 on: September 07, 2016, 10:32:09 AM »
priyamraj5
Plane Lover
Active Member
**

Reputation Power: 2 
priyamraj5 has no influence.
Offline Offline

State: Delhi
RC Skills: Intermediate
Posts: 62
Join Date: Sep, 2015

Propellors are Dangerous!



Hey , Cool built ! What was the Wingspan ?
Logged
 

Pages: 1 2 3 4 [All]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Scratch Build - Pusher Trainer (Build No.2)
Self-designed, DIY and College Projects
chils41 2 7506 Last post June 13, 2014, 04:05:47 AM
by johnywalker8pm
Coroplast ft storch
Chatter Zone
Ammar Bader Khan 13 7685 Last post June 14, 2017, 04:31:53 PM
by prabal276
ft storch
Electric Planes
gaurang.1972 10 5334 Last post November 11, 2017, 09:10:44 AM
by MakerHand
Motor for Ft Storch
Beginners Zone
Adel 3 1695 Last post July 23, 2020, 12:50:31 PM
by Mohammed Naveed
ft Storch
Beginners Zone
Adel 10 3183 Last post August 17, 2020, 05:58:41 PM
by gaurang.1972