|
Title: HobbyKing TMPro Predator UAV 74IN Plane Build Log Post by: CrazyPilot on June 27, 2011, 10:06:03 PM Hi all,
Its been 8 months since i purchased this beautiful plane from HK. Now its time to fly it so i thought i would share the build with you all. http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=5455 (http://i51.tinypic.com/2nvuhw0.jpg) Spec. Wing Span: 74in Wing Area: 370sq in Weight: 560g Length: 34in Engine Required: Speed 400 Size: 28-** Outrunner Radio Required: 4Ch / 4 Servos Pusher Prop Required Whats in the box: (http://i53.tinypic.com/2j4bpyu.jpg) (http://i56.tinypic.com/8x9bhk.jpg) Title: Re: HobbyKing TMPro Predator UAV 74IN Plane Build Log Post by: CrazyPilot on June 27, 2011, 10:18:32 PM I am going to use following items for the setup.
(http://i51.tinypic.com/wqykif.jpg) Motor: TGY AerodriveXp SK Series 35-30 1400Kv / 470 or TowerPro Brushless Outrunner 3015-7 1000kv / 470W ESC: TURNIGY Plush 60amp Speed Controller Servos: HXT900 9g / 1.6kg / .12sec Micro Servo (4units) Connectors: 20CM Servo Lead 32AWG (2pc) 40CM Servo Lead 32AWG (2pc) Y Servo Lead 30cm Length (1pc) ESC to Motor connector: Turnigy Pure-Silicone Wire 14AWG RED (1mtr) Turnigy Pure-Silicone Wire 14AWG BLACK (1mtr) Battery: Turnigy Nanotech 2200mAh 3S 25~50c Lipo Hobby King Battery Monitor 3S Propeller: GWS HD9050 3 Blade Prop Counter Rotate Radio Sytem: Futaba 7C 2.4GHz w/R617FS Receiver FPV System: 900MHZ 1500mW Tx/Rx & 1/3-inch CCD Camera PAL 520TVL Title: Re: HobbyKing TMPro Predator UAV 74IN Plane Build Log Post by: divay99 on June 28, 2011, 02:33:29 AM @crazy.... you hid this from me for so long ....
Title: Re: HobbyKing TMPro Predator UAV 74IN Plane Build Log Post by: CrazyPilot on June 28, 2011, 06:54:20 AM GM Sir, No i dint hide it. I just forgot that i had it. Been busy with other planes.
Title: Re: HobbyKing TMPro Predator UAV 74IN Plane Build Log Post by: saurabhhsrivastavaa on June 28, 2011, 02:38:26 PM Hmmm... Crazy... Its a little big to be forgotten... :giggle:
Title: Re: HobbyKing TMPro Predator UAV 74IN Plane Build Log Post by: SunLikeStar on June 28, 2011, 02:54:28 PM Beautiful plane, i hope there is no mud on your flying field. I am waiting for the monsoon to go away so that i can take my new easy glider out.
Title: Re: HobbyKing TMPro Predator UAV 74IN Plane Build Log Post by: ujjwaana on June 28, 2011, 05:54:15 PM Termed FPV/UAV, be advised about its flight characteristics. It is not a very stable platform and has a nasty tendency to tip stall at high banking.
Nice to scare people... stunner look. Any body bought the MQ-9 Reaper ? Its another fabulous plan for scale characteristics Title: Re: HobbyKing TMPro Predator UAV 74IN Plane Build Log Post by: rcpilotacro on June 28, 2011, 08:16:04 PM where is the hellfire ?? the real one is not easy to fly, due CG issues, wonder how the RC one will behave
Title: Re: HobbyKing TMPro Predator UAV 74IN Plane Build Log Post by: CrazyPilot on June 28, 2011, 08:20:32 PM Hmmm... Crazy... Its a little big to be forgotten... :giggle: Sir the box it comes in is really small for its size. i have lots of boxes stacked up and it was somewhere in buried. anyways was not able to start the build today cuz i am down with high fever. Beautiful plane, i hope there is no mud on your flying field. I am waiting for the monsoon to go away so that i can take my new easy glider out. Thx Sir. And there is lot of mud on our field because of early monsoon. infact we are not able to reach our ground because of all the mud. hope the situation changes soon. Termed FPV/UAV, be advised about its flight characteristics. It is not a very stable platform and has a nasty tendency to tip stall at high banking. Nice to scare people... stunner look. Any body bought the MQ-9 Reaper ? Its another fabulous plan for scale characteristics Yes sir, i have read the reviews about its tip stalling. i will be careful also its not going to scare anyone. i will be more scared flying it. |