RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: March 21, 2020, 11:52:53 AM »
MArtins
Plane Lover
Active Member
**

Reputation Power: 1 
MArtins has no influence.
Offline Offline

City: Margao
State: Goa
RC Skills: Beginner
Posts: 34
Join Date: Jun, 2018




This plane will have a wingspan of 6’ and a wing chord of 14”. It will be powered with one 1000kv 2830 brushless motor. The fuselage will be made from an aluminium square tube and the wings from thermocol covered with tape. The main wing will have a spar and a polyhedral, and will have the KMF mk 2 airfoil . The tail will have a twin rudder. Hope it will fly. Please feel free to give your valuable suggestions and feedback, and also consider that im a 16yr old.

image.jpg
Im a 16yr old who designed this:What do you think?
* image.jpg (40.03 KB, 800x600 - viewed 1041 times.)
Logged

Aim for the stars and you may have the moon.
 

Read
« Reply #1 on: March 21, 2020, 12:48:44 PM »
Kings Of Rc India
Plane Lover
Active Member

**

Reputation Power: 1 
Kings Of Rc India has no influence.
Offline Offline

City: PUNE
State: Maharashtra
RC Skills: Expert
Posts: 45
Join Date: Nov, 2019



Your Design is amazing I remember Stick flyer with that same design
No Fuselage Needed
Just a Stick it can be balsa or Aluminum
And 3d Printed Motor Mount or Perfect mount is available on Aliexpress in very Cheap Price
Here
Rs. 239.75 | 5PCS Sparkhobby Simple Vertical Motor Mount Suitable for XXD Sunnysky2208 2212 2216 2217 Class Brushless Motor RC Airplane Model
https://a.aliexpress.com/_dYrYzSt
Use 2212 1400 Kv to 2200 Kv with 8040 Prop slow flyer
and the 2 9 Gram plastic Gear Cheap Servos
if planning to use only 2 servos then Dihedral Is Must
1000 Mah lipo 3 cell is perfect for stick Flyer
and your Done Boom You have Build Slow stick flyer
make sure you Connect your Rudder servo to Ailerons port on Receiver here are some Cool Pictures of Plane

-687584895543201453.jpg
Re: Im a 16yr old who designed this:What do you think?
* -687584895543201453.jpg (29.18 KB, 800x800 - viewed 970 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged
 

Read
« Reply #2 on: March 21, 2020, 05:55:42 PM »
MArtins
Plane Lover
Active Member
**

Reputation Power: 1 
MArtins has no influence.
Offline Offline

City: Margao
State: Goa
RC Skills: Beginner
Posts: 34
Join Date: Jun, 2018



Wait, a 6 foot stick flier will fly slow with a 8” prop?
Will it give enough thrust ?
Logged

Aim for the stars and you may have the moon.
 

Read
« Reply #3 on: April 03, 2020, 03:40:10 AM »
VinayakR
Heli Lover
Senior Member
***

Reputation Power: 2 
VinayakR has no influence.
Offline Offline

City: New Hampshire , US
State: OUTSIDE INDIA
RC Skills: Beginner
Posts: 161
Join Date: Sep, 2010



Good to see young modelers !

You might have to move ailerons far out to increase effectiveness of it. For 2830/1000 kv motor you can use 10x4.5 prop . I had build similar plane from plans (not my design) you can check it here on rcindia http://www.rcindia.org/electric-planes/build-log-russ-40-trainer-(quick)/

Good Luck with your build.
Logged
 

Read
« Reply #4 on: May 10, 2020, 12:32:33 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012



Conversation so far (on PMs)

”Could you help me with the wing loading though?
The wing is 6' long, 16" of chord and an auw of approximately 2kg.
Thank you.”

“Hi Martin (?)
Not clear what the question is.
Wing loading is the all up weight of the plane, divided by the wing area.
Usually expressed in gms/dmsq or oz/sqft.
Regards”

“Hello Sir,
I found the wing cube loading to be about 3.9
What does this tell me ? And will the plane fly ?”


1. The WCL tells us that
a) the flight characteristics will be similar to those of a similar model of a larger or smaller size that has a similar WCL value
b) at a WCL value of ~4, it will be very easy to fly (provided of course that it is capable of flying from the design and construction points of view)

2. Will it fly?
Not enough information to make a reasonable guess.
But 6ft span 2kg weight is too large and expensive to experiment with.
Better to start with a design known to be a stable flier (and a pilot with some experience)

Please consider making a smaller version of your design, using balsa/depron, of say ~15” span.
No motor, battery, servo, Rx etc. Just a plain and simple and inexpensive version that can be hand glided / test flown indoors or in a small courtyard. This will help to verify adequacy of tail areas and dihedral, appropriateness of decalage, location of CG etc.

Best wishes for your experiments.
« Last Edit: May 10, 2020, 01:01:21 PM by K K Iyer » Logged
 

Read
« Reply #5 on: May 13, 2020, 10:47:37 AM »
MArtins
Plane Lover
Active Member
**

Reputation Power: 1 
MArtins has no influence.
Offline Offline

City: Margao
State: Goa
RC Skills: Beginner
Posts: 34
Join Date: Jun, 2018



Ok, so im almost done with the build, now I only have to install the electronics and im done !!
And that black line on the wing is a foot ruler !

CC8095C9-D7B9-43C4-BA5C-101381B27406.jpg
Re: Im a 16yr old who designed this:What do you think?
* CC8095C9-D7B9-43C4-BA5C-101381B27406.jpg (73.07 KB, 800x600 - viewed 703 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Aim for the stars and you may have the moon.
 

Read
« Reply #6 on: May 13, 2020, 12:02:40 PM »
SKY KALAI
Plane Lover
Senior Member

***

Reputation Power: 3 
SKY KALAI has no influence.
Offline Offline

City: SALEM
State: Tamil Nadu
RC Skills: Beginner
Posts: 100
Join Date: Jun, 2018



yeah its nice design...i love it. you use a 1000kv BLDC. i think propeller size is 1045. i attached a thrust test of a 1000kv BLDC. you said wing size is 6ft. so it will take more than 2 kg. and battery, servos, esc, RX, adhesive and Al rod. its take totally more than 2.8kg. but the 1000kv bldc gives maximum 825g of thrust at 100 percent throttle. so both motor thrust is very low. so the plane is very hard to fly or lift or glide. and 100 percent throttle will leads to damage or reduce the ESc's life. so finally i want to tell you, please make sure your calculations, if it is safe design. you can complete your plane. and I'm very excited to see your plane flying. after completion of work. please upload a video or link Hats Off Hats Off Hats Off Hats Off
SKYKALAI

1000kv thrust.jpg
Re: Im a 16yr old who designed this:What do you think?
* 1000kv thrust.jpg (31.25 KB, 499x327 - viewed 472 times.)
Logged

Youtube = skykalai creations
 

Read
« Reply #7 on: May 13, 2020, 03:07:43 PM »
MArtins
Plane Lover
Active Member
**

Reputation Power: 1 
MArtins has no influence.
Offline Offline

City: Margao
State: Goa
RC Skills: Beginner
Posts: 34
Join Date: Jun, 2018



Actually im using two 2212 1400kv motors and not 1000kv ones , with 1045 props.
So, what is the thrust of these 1400kv motors ?
Logged

Aim for the stars and you may have the moon.
 

Read
« Reply #8 on: May 13, 2020, 04:15:56 PM »
SKY KALAI
Plane Lover
Senior Member

***

Reputation Power: 3 
SKY KALAI has no influence.
Offline Offline

City: SALEM
State: Tamil Nadu
RC Skills: Beginner
Posts: 100
Join Date: Jun, 2018



1045   Prop, 32.8 A (max) , 368W (max), 1080g (thrust) , 2.93g/w
at 100% throttle.  and when we use 80% (max), the thrust rate is maximum 950-980g
Logged

Youtube = skykalai creations
 

Read
« Reply #9 on: May 13, 2020, 06:38:06 PM »
MArtins
Plane Lover
Active Member
**

Reputation Power: 1 
MArtins has no influence.
Offline Offline

City: Margao
State: Goa
RC Skills: Beginner
Posts: 34
Join Date: Jun, 2018



Thank you
Logged

Aim for the stars and you may have the moon.
 

Read
« Reply #10 on: May 13, 2020, 06:50:17 PM »
SKY KALAI
Plane Lover
Senior Member

***

Reputation Power: 3 
SKY KALAI has no influence.
Offline Offline

City: SALEM
State: Tamil Nadu
RC Skills: Beginner
Posts: 100
Join Date: Jun, 2018



 Hats Off   Hats Off Hats Off
Logged

Youtube = skykalai creations
 

Read
« Reply #11 on: May 13, 2020, 08:50:56 PM »
Mohammed Naveed
Plane Lover
Forum Hero
*****

Reputation Power: 14 
Mohammed Naveed has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 893
Join Date: Jul, 2015



i wouldn't recommend 10x4.5 prop with a 2212 1400kv, it can draw higher amps enough to damage the motor in the long run!
i would say go with 9x6 prop at max
Logged
 

Read
« Reply #12 on: June 25, 2020, 10:22:44 AM »
Pyloneasy
Plane Lover
Active Member
**

Reputation Power: 1 
Pyloneasy has no influence.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Beginner
Posts: 8
Join Date: Jun, 2020



i think you should us a 1306 motor on 2s 200mah  cause 2212 may  make your flyers tip heavy
Logged
 

Read
« Reply #13 on: June 25, 2020, 06:33:52 PM »
THE RC GUY
Plane Lover
Active Member

**

Reputation Power: 1 
THE RC GUY has no influence.
Offline Offline

City: jaipur
State: Rajasthan
RC Skills: Beginner
Posts: 45
Join Date: Jun, 2020



also consider that im a 16yr old.
great plane I wish that I could have made it as one of my first planes
« Last Edit: June 25, 2020, 08:37:53 PM by THE RC GUY » Logged
 

Read
« Reply #14 on: June 25, 2020, 08:50:47 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012



On the contrary.
Those who ask questions, if they reveal their age/background/experience, it helps the responders to reply/advise accordingly.

Even more important is for those providing replies to establish their experience so that readers know how knowledgeable the replier is.

I see that the most experienced members rarely respond, unless it’s a very specific query.

New members (irrespective of experience) are the ones who respond the most. Often without any idea if their reply is correct or even relevant.

Perhaps a case of a naya mullah eating more onions...

Before reacting, remember that I can quote many examples.

Logged
 

Read
« Reply #15 on: June 26, 2020, 02:03:10 AM »
asperised
Plane Lover
Active Member

**

Reputation Power: 1 
asperised has no influence.
Offline Offline

City: Chennai/Manipal
State: Tamil Nadu
RC Skills: Beginner
Posts: 70
Join Date: Apr, 2020



I have a couple of questions for you

1. How have you fixed the polyhedral in the wings? It doesn't look very strong to me especially considering the size of the aircraft.

2. Are you using a spar? If yes, what material and length is it? Thermocol is generally not strong enough to handle the forces acting on it inflight.

3. How experienced are you with flying? Only fly this if you have experience flying planes. This is a big safety hazard with the aluminium probing out like that.

If the answer to all the above questions is satisfactory then the plane should fly with the given setup if the loading is high enough and the cg is balanced.

I do not mean to demean you or anything, but these are important questions before flight. You have actually built an impressive plane for a beginner.

@Iyer sir, I heavily disagree with mentioning the age part. I think only mentioning the experience should be enough as often times people use their age as a convenient excuse to not do their best when it mostly isn't the limiting factor. I've been guilty of this myself quite often.

Regards,
Nitesh
Logged
 

Read
« Reply #16 on: September 07, 2020, 08:44:19 AM »
MArtins
Plane Lover
Active Member
**

Reputation Power: 1 
MArtins has no influence.
Offline Offline

City: Margao
State: Goa
RC Skills: Beginner
Posts: 34
Join Date: Jun, 2018



Hello everyone, replying here after a long while, sorry for that.
I finally decided to ditch the aluminium fuselage and the twin rudder design.I am now trying to build it with a v tail and a very short thermocol fuselage, with the same wing.Will update with the build further .
« Last Edit: September 07, 2020, 08:56:05 AM by MArtins » Logged

Aim for the stars and you may have the moon.
 

Read
« Reply #17 on: September 07, 2020, 08:55:21 AM »
MArtins
Plane Lover
Active Member
**

Reputation Power: 1 
MArtins has no influence.
Offline Offline

City: Margao
State: Goa
RC Skills: Beginner
Posts: 34
Join Date: Jun, 2018



Hello Sir,
First of all, your first doubt is correct. I wanted to make the wings such that they were more portable, to at least fit in the car, which resulted in me making the polyhedral wing tips detachable, attachable with screws. It seems strongish, but i may make it stronger.
Secondly, I'm not using any spar. That wing is made of two sheets of thermocol, each being slightly more than an inch thick. To strengthen that even more, its covered with tape, and over the years, I’ve found out for myself the even a thin sheet of thermocol covered with tape is very difficult  to break.
Thirdly, sadly I dont know of any experienced, or even pilots, near me. And then there is this covid, soo...
Regarding my experience, i have piloted my own built quadcopter multiple times, and i have also piloted at least 4-5 of my own built planes, which sadly crashed due to either poor piloting or not being built properly. As a matter of fact, i started on my first own designed and build plane when I was just 10 years old.
Thank you.
Logged

Aim for the stars and you may have the moon.
 

Read
« Reply #18 on: September 09, 2020, 11:24:44 AM »
MArtins
Plane Lover
Active Member
**

Reputation Power: 1 
MArtins has no influence.
Offline Offline

City: Margao
State: Goa
RC Skills: Beginner
Posts: 34
Join Date: Jun, 2018



Hello,
Im back with some sad news. I almost finished with the plane, only to discover that my transmitter stopped working. Now, my parents wont buy me a new one as they say that it will “distract” me from my studies, but they will allow me to buy one AFTER my jee and boards, which may end in April, so yeah ...
Logged

Aim for the stars and you may have the moon.
 

Read
« Reply #19 on: January 12, 2021, 09:05:13 AM »
MArtins
Plane Lover
Active Member
**

Reputation Power: 1 
MArtins has no influence.
Offline Offline

City: Margao
State: Goa
RC Skills: Beginner
Posts: 34
Join Date: Jun, 2018



Hello,
Due to covid situation the boards have been postponed, and jee may end by May end, so yeah, the wait continues...
Logged

Aim for the stars and you may have the moon.
 

Read
« Reply #20 on: September 04, 2021, 11:13:35 PM »
MArtins
Plane Lover
Active Member
**

Reputation Power: 1 
MArtins has no influence.
Offline Offline

City: Margao
State: Goa
RC Skills: Beginner
Posts: 34
Join Date: Jun, 2018



Build Update :
Finally , my exams have ended !! What a relief !!
So, I built a new fuse made from thermocol foam.
I will reinforce the wing tips.
Ordered a Qx7 finally after convincing my parents.
Hopefully I'll be able to maiden it soon.
Will keep posting 😁.

IMG_20210904_231812.jpg
Re: Im a 16yr old who designed this:What do you think?
* IMG_20210904_231812.jpg (18.04 KB, 265x274 - viewed 154 times.)
Logged

Aim for the stars and you may have the moon.
 

Read
« Reply #21 on: September 05, 2021, 04:17:45 AM »
Free Flight
Plane Lover
Forum Veteran

****

Reputation Power: 6 
Free Flight has no influence.
Offline Offline

City: Mumbai & New Jersey
State: OUTSIDE INDIA
RC Skills: Advanced
Posts: 358
Join Date: Dec, 2011



Looks nice. for your first time, youngster, own design.  Good luck with your maiden. Looking forward to your video.
Logged
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Self-designed hovercraft!!(Looks like a car though!)
Self-designed, DIY and College Projects
rohitgupta322 11 6573 Last post January 04, 2012, 11:30:44 PM
by harsha
First Electric Spad (Self Designed) :- SR-3 « 1 2  All »
Electric Planes
sanjayrai55 32 19574 Last post January 01, 2013, 06:35:56 PM
by sanjayrai55
self designed fun flyer « 1 2  All »
Electric Planes
bhushy 32 14161 Last post September 30, 2018, 11:34:57 AM
by BobSumoSolid
IS ANYONE NEED SELF DESIGNED PARTS
Self-designed, DIY and College Projects
yadwindergill1 0 1490 Last post August 06, 2018, 02:43:33 PM
by yadwindergill1
16yr old kid designs and builds his own quad from scratch:
Multirotors
MArtins 0 809 Last post January 17, 2020, 06:40:52 PM
by MArtins