|
Title: its my SHORT TAIL.. Post by: roopeshkrishna on December 31, 2012, 10:06:26 PM this one is my simple coro plane based on my V2.. but i sliced her from tail about 4 inches.. and became even lighter.. more lighter.. morre fun and excitements.. and no rudder is provided..
Title: Re: its my SHORT TAIL.. Post by: roopeshkrishna on December 31, 2012, 10:08:07 PM here short action..
http://www.youtube.com/watch?v=7b-QR8PujY4 Title: Re: its my SHORT TAIL.. Post by: KALYANPRODHAN on December 31, 2012, 10:21:48 PM Welcome back krishna, with new plane. :hatsoff:
We are expecting some more attractive artwork from you. Title: Re: its my SHORT TAIL.. Post by: roopeshkrishna on December 31, 2012, 10:46:50 PM thank you Kalyan.. working on more..
Title: Re: its my SHORT TAIL.. Post by: kartikmadhira on December 31, 2012, 11:17:21 PM sir, auw and setup specs?
Title: Re: its my SHORT TAIL.. Post by: roopeshkrishna on December 31, 2012, 11:32:26 PM Karthik.. after cutting the tail she becomes 800 grams.. no rudder, means little more weight saving.. and you can use any 1000 RPM motor with 160 watts at least, but a 1000 RPM, or 900 RPM motor with a 240 watts will be even better.. with a 9X6 slowfly electric prop.. 30 amps ESC, or 25 Amps ESC with heat sink, must keep it out, 1800 mA/H battery.. and cost to make a plane.. is about 300 Rs/-.. will add a detailed build log here.. hope may helpful.. :thumbsup:
Title: Re: its my SHORT TAIL.. Post by: Shannon on December 31, 2012, 11:38:49 PM 300 rs just to build it cool eagerly waiting {:)} how much did the electronics come too ..i would build one for my dad ;D
Title: Re: its my SHORT TAIL.. Post by: kartikmadhira on December 31, 2012, 11:41:06 PM :thumbsup: :thumbsup: :thumbsup:
Mine same setup(avispad.)..didnt fly :-\ :-\.though it was my first time.but after some 20-30 crashes flew well. BTW, how did u paint sir? Title: Re: its my SHORT TAIL.. Post by: roopeshkrishna on January 01, 2013, 12:02:24 AM Shan.. here a 2mm 8X4 feet sheet of coro costs about 120 Rs/- and the cost will be within 300/Rs while you make yourselves.. the electronics is all up to you.. a basic 4 channel radio is far enough.. but i prefer to add rudder control also.. will be nice, especially for begginers..
Karthik.. if the craft within 1000 grams, with a 1000 RPM 200 or more watt motor, ESC properly calibrated, will fly.. try to take off with long run.. no worry about crashing.. make spare planes.. painting.. use PU paint.. will be lighter.. and lasts longer.. gives excellent finish.. give me a little time.. adding a detailed build log.. no boasts.. claims.. but make it.. fly it... enjoy it.. :thumbsup: |