|
Title: J3 piper cub. Post by: v2 eagle on September 27, 2016, 04:46:54 PM After a long wait finally built my j3 cub. Plans from outerzone. Full balsa stick built fuse and transparent covering.
Motor is emax 1806 and 2s 1000mah lipo. The plan is for sheeted fuse and rudder control and i built the fuse with sticks and had aileron only control. The maiden was okay and aileron has no effect and the plane is a floater for sure. Need to put rudder and try next week. Pics follows.. Sent from my ZUK Z1 using Tapatalk Title: Re: J3 piper cub. Post by: rishabhbarma on September 28, 2016, 12:54:45 PM Sounds good.
Share the build log as well, maybe? Title: Re: Post by: v2 eagle on September 28, 2016, 01:37:57 PM Trying to upload pics, getting error in tapatalk. Will upload from system
Sent from my ZUK Z1 using Tapatalk Title: Re: J3 piper cub. Post by: v2 eagle on October 01, 2016, 06:29:03 PM Pics
Title: Re: J3 piper cub. Post by: Aanishp on November 18, 2016, 05:56:46 PM Nice, looks simple.
Sent from my iPad using Tapatalk Title: Re: J3 piper cub. Post by: K K Iyer on November 18, 2016, 09:02:22 PM @v2 eagle,
Ashok sir, Waiting for updates... Regards. Title: Re: J3 piper cub. Post by: gaurang.1972 on November 18, 2016, 10:40:33 PM Looks nice Ashok sir :thumbsup: :thumbsup: :thumbsup:
Title: Re: Post by: v2 eagle on October 06, 2017, 09:38:06 AM https://youtu.be/pQ33gOrTJa0
In flight. Sent from my ZUK Z1 using Tapatalk Title: Re: Post by: v2 eagle on October 06, 2017, 09:39:07 AM A nice humble light under powered plane, abit twitchy though. Never the less it was an awesome built and to rebuild.
Sent from my ZUK Z1 using Tapatalk Title: Re: J3 piper cub. Post by: sanjayrai55 on October 06, 2017, 10:43:39 AM Congratulations {:)}
Title: Re: J3 piper cub. Post by: wingmanbunty on October 06, 2017, 03:26:17 PM nice {:)}
Title: Re: J3 piper cub. Post by: unidrakeshrc on October 06, 2017, 06:15:11 PM :hatsoff: :hatsoff:
|