|
Title: landing my scratchbuild Post by: pnkyjs on June 05, 2018, 08:00:37 PM https://www.youtube.com/watch?v=hu-BcSChkm4&feature=youtu.be
Title: Re: landing my scratchbuild Post by: pnkyjs on June 05, 2018, 08:02:09 PM https://www.youtube.com/watch?v=awCzSCtEwcY
Title: Re: landing my scratchbuild Post by: AL HAM SHARI on June 05, 2018, 08:45:43 PM Your plane looks funny.
Title: Re: landing my scratchbuild Post by: sanjayrai55 on June 05, 2018, 08:51:17 PM Funny? Sure flies well 👍
Sent from my Moto G (4) using Tapatalk Title: Re: landing my scratchbuild Post by: tictoc21 on June 05, 2018, 10:06:21 PM Sir try with ailerons, will have better controls and wrap wings with tape and use spar for wing.
Title: Re: landing my scratchbuild Post by: pnkyjs on June 06, 2018, 10:41:20 AM thank you Sanjay sir, yes tic tock, my new build will have ailerons. I have a cf spar in the wing and its depron k type airfoil.
Title: Re: landing my scratchbuild Post by: rastsaurabh on June 06, 2018, 10:47:17 AM Nice built, i see you have placed pusher motor strategically on front to balance the CG. Pushers are usually tail heavy.
CF is not necessarily required for spar ... wooden spar is also good enough. have a visit to local wood shop and you will find light beading ( as its called) wood, much appropriate for wing spar. Title: Re: landing my scratchbuild Post by: pnkyjs on June 06, 2018, 11:39:48 AM Thank you Rastsaurabh sir. I can also use 2s, 3s lipos of any Capacity , the 2200mah does weight on the upper side. But I fly well with the 2s 1000 mah too. The position for lipo is at the CG of the plane.
|