RC India

LAZY BOY
This is not my plan, copied from internet (Design by David Fuller and some guy from Slovakia). I'm new to RC India, hope you all like this model . it sure looks cool.
Do comment afterwards  :hatsoff:

MORE PICS

Neat construction. Care to share the plans?

Welcome to RCI!

LAST PICs

RumblePirate

CHEERS ALL!!! :hatsoff:


Disclaimer: Once again its not my personal plan, wish i could be as good.... lol
               Credits to Mr.David

thanks mate, i've shared the plans in .pdf file.

Sure looks good  :thumbsup:

Post some more details on the specs, material used and where you got it, links to the plans, and of course the video when you maiden it

ok... some more of the plan Pics


this model is featured at RCGroups.com/forums

Also, Specifications set up:

Wingspan: 78.5"
Length: 52"
AUW: 18 ounces
Motor: Ultrafly FRIO E/10/09 (almost any "bell" type outrunner producing 100W or more should be sufficient)
Battery: 11.1V, 1250 mAh LiPo
Servos: GWS Naro x 2
Wing area: 580 square inches
Wing loading: 4.5 ounces per square foot

check this video: http://www.youtube.com/watch?v=KqSUZ-2aI8M# (http://www.youtube.com/watch?v=KqSUZ-2aI8M#)

Hi pirate
Are those snaps are of your Model or they are posted from that site ?
nearly look alike pics  8-), some months back i have save om my pc.

Or my bad memory  :banghead:

yes its not my make, i've just started on this hobby. I was looking for some easy DIY fpv's n i came across this KFm1 airfoil based model.
I've mentioned the website, RCGroups>Forums, you might hv seen the thing may be..

Hey awesome build. Where in Delhi you got this foam??

lol, i haven't. Again this is not my model or build...
I would also like to try some blue foam here, no info about vendors as such...

http://dir.indiamart.com/cgi/catprdsearch.mp?ss=epp+foam&cq=delhi

Hello,
Your build is very neat and clean {:)} {:)}. Where did you get the foam you've used. Is it from the link mentioned?

This post has made a fool of everybody; he has not even bought the foam - just posted something from another website  >:( >:(

@sanjai sir : just look at the 7th pictures you can see a foreigner hand.  :rofl: :rofl: :giggle:

Sanjay sir that's what i intended to say in post 7  8-)

Pirated photos?  :o

Sanjay sir and vc sir,

all pics belongs to rcgroup build  and i have all these pics in my computer.

Arre yaar tum logon ko agar aangreezi samaj nahi aaati  ??? toh comment kyon karte ho. lol .. Paise milte hain kya  :headscratch:????

I've given credit to the designer and the model builder . Even the video link is his, as I mention above (if u all care to read carefully) this complete build is available at RCGroups.com - LAZY BOY
I"m all new to this hobby, didn't find many inspiring fpv models on RCI. I shared all the details i could find and i sure hope to built it myself as well

thanks guys

cheers

P.s.: Again this is not my model or build  :banghead: :banghead: :banghead:

 :giggle: :rofl:  :rofl:  :rofl:


Anyways, it certainly appears to be a simple and elegant design for a first build. Hope you can procure the foam it requires. If not, there's always coroplast.

Dear rumble pirate...you shud hav written "This is not my build" instead of "This is not my plan" ...due to this many understood this was ur build