Good evening all respected Modelers..
i am adding this build log here of my favorite RC plane, by coro sheet, because ample of requests to me.. answering all individually is a great head ache, especially with my slow internet connection.. here i am adding a step by step building instructions, that shows you all easy to make.. this is my humble work, and not a claim, as a great airplane, or ultimate, but simple, practical and easy to make.. as we can build this plane within three hours, this one is great for weekend RC projects, and can go for RCying on next day.. (Sunday)..
with a wing span of 50 inches, and 7 inch chord, this one is stable.. and you can fly this one as a slow flyer, can loop, or maneuvers..
but request to you all that, for some additional reinforcements, if you are going for a high speed or aerobatic flying.. you can simply convert this one to any configuration, as high winger, Trainer, low winger aerobatic, or midwing extra tougher.. can also go for lots of experiments, as you can.. one of the main advantage of the plane is very low cost.. and i promise you that it will fly as this model is evaluated by Veterans in the segment.. no frills to explain, but will be thrilling.. you can add any paint scheme, at very low cost, as you can paint this one with ordinary enamel paint, to high quality PU finish.. no special equipments or hiteck tools are needed to make this fly.. any interested one can follow this one and can make within some hours with song.. you can consider me as an insane, or nut case, as some modelers consider, but no matter, about it, as you can just follow the build log.. not me.. because, this fly is so simple but practical.. and proved even in our Prestigious Institutions.. still flying.. 

another advantage of the fly is that you can add any decals according to you.. and paint schemes.. you can also, make as various configurations, as slant nosed, car type fuselage, hump back, for low winger and aerobatics, and with bubble canopy for fighter look.. also can add a mock up radial engine with foam board.. will explain you all step by step, so will find easy..
here i am thanking to some of my Great Colleagues, as Mr Nikin, who is an Aeronautical Engineer, Mr Vinod, Veteran aero modeler of Kerala  State, Pradeep Sir, aero modeler of Karnataka.. and some of Seniors for the flying tests, flying and evaluation..
i will explain from wing to landing gear to tail wheel attachments.. by making two crafts of your own, you can keep it one as reserve, or group flying, race.. or anything.. and when painted with some care, aircrafts will be stunning to look..  proud self..? sure.. you can also use this one as experiment platform, by adding clipped wings, polyhedral wings, short wings.. long wings.. and yes with various electric plants, and IC engines, with additional reinforcements.. so versatile..

i am thanking to Vinodettan once gain.. for great flying..
and some design considerations.. all we know, a 5:1+ 3:1 ratio is the best for airplanes.. even the largest airplanes goes this ratio.. this one is also accomplished in same ratios to get a good stability all the while.. with an appropriate motor and set up, will fly nicely.. 

what are the basic materials that we need..?
are:
one full sheet coro sheet in to 2 mm, and no idea about thicker coro sheets.. in my works the 2 mm coro sheet.. can make two airplanes with careful cuts..
1, coro sheet X 1 nos, 2mm thick.
2, Fevicol, or any made (good quality) SR, ( solution rubber based),one tube.
3, Industrial cyano glue. one bottle.
4, 4 mm balsa sheet. X 1 nos. for normal flying, and two sheets for extreme flying.
5, masking tape of 3/4 inch thick X 1 nos.
6, heavy duty art knife.
7, cutting board.
and a flat good table to work on..

about electronics...
we can use any appropriate power set ups, for this craft.. but my proven set up is this, motor from, AEW, Chennai, is great all the while.. http://aeroworks.co.in/store/index.php?id_product=18&controller=product.
i am not a company ambassador, but my proven combination is this.. this 880 RPM/Volt motor can spin a 9X6 pro with ease, gives a truck like torque..
and the ESC, is again from AEW, in to 40 Amps, for safety sides.. http://aeroworks.co.in/store/index.php?id_product=15&controller=product.
can use any motor up to 1000 RPM. but trial and error method is needed..
battery: was using 1800 and 2200 ma/H  30 C type..
Servos: any trusted brand..need 4 nos as we adding the ailerons.. ( mine is Hextronics).

Excuse me Sir, there is a lot of 'history' attached to this model. Would you care to explain all that first? I mean, one year ago, we were all mesmerised by your promises and were waiting to buy this through one of your appointed 'distributors' / 'well wishers'. Then something soured, somewhere.

Before you launch on to your extra poetic hyperboles and start eulogising personalities for their assumed greatness, would you be so kind enough to tell us why this model was not sold as promised and why you are so generously revealing a build log and 'RCit on Sunday' thread?

Come on Roopesh, what do you think we all are - wide eyed brainless bimbos? All is NOT forgotten. Clear it up first before you add to your number of posts. Enough is enough Sir.

VC sir, my state of health is not allowing to follow the deal.. and i clearly mentioned to Sai.. all the while.. and i requested him to look some one to learn and follow the work.. and still i managed to deliver some of completed models to Sai.. i added the log here because of lots of requests.. and not for any personal benefits..

Or would you like me to remind you of your PM to me on 16th. May 2012 and cut / paste the entire contents right here? What I am trying to say here Mr. Roopesh Kumar is that you are a BRILLIANT, INGENIOUS, INNOVATIVE, GENIUS MODELLER  and that I respect you for your abilities. Kindly STOP misleading people with your extra emotional hyperboles and false promises and high flown claims.

Roopesh / Rathi Krishna's tall claims have been busted before on this forum and Internationally and will be busted again, if you keep this charade on. Be who/what you are and we will all respect you for it. Stop trying to portray yourself as a saviour. We are doing fine by ourselves and can do without one.

We are still waiting after 2 years to learn the GREAT secrets of how to make your Speed Controller for Brushed Motors without soldering (Have you sorted out your Patent/Indian Navy Permissions hassles as yet?) ?

And by the way, enough of your health issues. Do you care about or do you have any idea of what physical / mental health the other members of this forum are in and are going through? PLEASE STOP peddling your physical/mental/emotional infirmities at regular intervals on this forum to gain sympathy. It makes me (and others) sick. I have personally called you and spoken to you about this but it doesn't seem to make a damn difference to you.

There you go. Whenever you are cornered, you slink away into hibernation.

The FINEST modeller / INGENIOUS Scratch builder on this forum or anywhere else (to my knowledge).

Why is he bringing ridicule and scorn upon himself at regular intervals with his irrational posts/actions? I feel sorry about this. Truly sorry, Roopesh - please wake up and take heed.

VC Sir, i do not know why you are trying to insulting me in various ways.. and you always consider me, just as massaging my chest, while reading your insulting comments.. i promised you to make a same aircraft V2, with white color and red tips.. and some for Augustine Sir and for some Seniors also.. and above all we had good dealings with boat kits.. and i do not know why, and when you started insulting me, every while.. if any misunderstanding happen from my side just tell me.. because i always respect you by age and by your works.. bearing insult from a respected person is heart breaking..
about Rathi krsihna..  i am still living as Roopesh Keeriyaatt, not Kumar, because of two things.. the first one is, thinking about my MOm and Siblings.. if they allow me, within this time, i will be transformed in to a real woman, by sex change surgery.. because, i want to be a woman.. i cross dresses everyday, even now, that i cant resists.. its a transformation inside me.. and its my extreme personal side, in fact, but you never forget the thing that i am a body builder now, and junior of body building..  and if my parents and Siblings allow me, i will undergo, the sex change operation, and will be a true Rathikrishna.. and will also hold the certificate.. as biological woman.. its my ultimate dream.. and dont try to shame me about talking this.. once again.. if i got a clear way, and chance, grace from my family, i will be a woman, by changing my sex.. you got it..? on that day, my name will be chosen as Rathikrishna.. and now trying to go in tamilnadu, as Tamilnadu Govt putting lots of promotion of the life of transgenders.. and will be at Canada, with my Colleagues.. not for sex work, but will be with my academic life..
and this post is not a post to answer this, but you asked this here.. and if anything wrong is with my opinion, Anwar sir, just delete my account from RCI.. and you never consider me as cornered.. because, i born in a prestigious family, but i grown in street.. and you never consider my postings are for adding the reputation in forum.. because my works are established.. well.. i have lots of ideas with me in my electronics and mechanicals.. still i am making lots of stuffs for my works.. will continued.. about health issues.. i mentioned here about the state of my health, not to seek any sympathy, and people knows me in face never say i am a sympathy seeker.. i expect anything from anyone.. especially the term sympathy.. because, at gae of 10, i started my own alone life, here.. and up this age, of 43, i never looked sympathy from anyone.. even from my wife.. once again.. if you have any misunderstanding with me.. tell me once.. yes VC Sir, such kind of insult from you is not a good thing as i respects your works and advices..

Roopesh this is an RC forum. We are not really interested in learning in depth about your trans gender mutations / yearnings or your sexual preferences. Please stick to the topic and the forum. This, I repeat, is not a forum instituted by Freud or Jung.

By the way, you are just about 4 years younger than I am, so please stop 'respecting me by my age'. How old did you want to portray me as - 83???

Get a life Roopesh - knock it off. GET REAL!


edit: punctuation......

Hi VC and Roopesh..
What is going on.. ? Why wash the dirty linen in the public? If you have any issues between you (it seems you have, obviously and I don't know much about what has transpired), talk / thrash them out in front of moderators privately, reach a final word and that's it - bury the hatchet. The forum is for the hobby and its development in our country and all that is related to it. Male, female, transgender, whatever it is, personal things are personal and hobby, talent and expertise in the hobby are totally different from personal / business world.  At the same time, don't think I am trying to preach. As I have already confessed, I am not aware of the events / facts that took place. All I request you is to please observe restraint in the public fora.  Hope I will not be misunderstood.

VC Sir, i clearly know this is an RC forum.. and was adding about related matters.. but you drooped  here about Rathikrishna, here just to insult me once.. while not realizing the fact that i am a shameless one about that.. and you always thinks that all of your insulting comments are affecting me, hiking my blood pressure..?  as Roopesh i am real at least for now.. and you never forget that my home and place is frequented by lots of RCI members seniors and juniors alike..? and other senior and junior officials from various institutions..? not to see me as Rathikrishna but to see me, and to be with my works.. do you really believe that i will shrinked in with shame talking about Rathikrishna..? its my extreme personal side once again.. or while reading your insulting comments..? and you never think that after your insulting comments i am going to stop my works all about..? please once again.. if you have any misunderstanding to me, just clear it.. leave the matter of age.. just elder than me..

Essarge.. sir, if you examine lots of the postings, you can instantly see many insulting comments from VC, insultimg me in various ways.. and up to this time i havent done anything wrong to him.. no idea why he is always insulting me.. and i am a simple person living with my modeling works here.. and not intervening in to anyones works or personal matters..

as a Senior, professional Modeler i realizes it is not a good place to continue, here.. because i am losing my valuable time.. with personal matters.. here.. have lots to do.. practically in the segments of model making.. good night and have a nice Rcying all.. 

All I have to say is that stop making false promises and glorifying yourself. You are GREAT and we all accept it.

PLEASE don't dilute your entries here with frivolous/unnecessary posts and comments.

Essargee - Sir, dig and you will find. Dig deeper and you will comprehend. Enough is enough.

Roopesh, may I inform you - I am a HR/Training Consultant by profession and I understood what you were going through ( long back). So did some other senior members on this forum.

Call me, and I am there for you. God bless and may you find peace.

Edit - toned down.

VC

i tend to go with Dr Raja gopal(essaargee) on this, you are a counsellor, you know everybody is born with a personality, loathing in self pity is one such trait, our aim of bringing rathi to fore was to help roopesh, than to corner him, we discussed that, then there is no point washing it in public again.

Honestly he is trying to put a log out here,he hasn't succeed much in posting the sequence of it. be that as it may

@Roopesh
please remember we are well wishers of you and admire your work, credits to any work is always given at the last and only if it is deserved (Like your eulogising Pradeep (if it is PVA Model fellow, you need to stayclear of him, he is a known Cheater), Kill rathi stay as roopesh, continue your work. Please stop self pittying, i am sure ModelBoat Mayhem guys told you the same, be rational. My humble request

Roopesh


For your benefit i am pointing out certain issues and highlighting some useless sentences, so that you keep your posts to the point, IMHO,
(a)  We know there is no need to spend so much money, one can make a RC model in 100 Rs
(b)  We know you have backpain issues (there is a thread dedicated to that, for god sake)
(d)  We know your internet connection is slow
(e)  We know you are working for some organisation, on RC model

etc etc

Here are some superfluous/useless sentences highlighted so that you could avoid the same in future IMHO again

I've said it before - I'm saying it again ....

Let the guy be... he is not harming any one - nor I think
is he intentionally trying to deceive.

If you don't like his posts - don't read them

Hmmm

Time to take a coffee break...  wait, I am starting on another week of GM diet, so where is that green tea

expected a good build log here... Totally confused which log is going on here... V.C sir I am of your son's age (if you have one, 18 year old) please pardon me if I am saying something wrong.. If you have any problem with roopesh sir please p.m it to him.. I am one of the many who requested roopesh sir for this build log and was eagerly waiting for this...  Please ignore his posts if you have any problem with them...  

and I don't  think Roopesh sir is much benefited by your so called 'sympathy'..

roopesh sir please continue helping all of us by your threads don't leave this forum

 

since the time roopesh has gone the transgender way, he hasn't been posting / visiting here

After reading this, I feel why do these people still call him VC "SIR " .  We hav lost a good human modder..The way his replies are shows it all,no matter how old he is....

i saw mr vc 's comment from another angle , if you read it you will find that he was very interested in the models and he do not want mr roopesh to mentioned about his physical problems always .but things went bad ,as some time what we write may not look as what we mean .

come on mr roopesh please continue you  post

Moderators, did you find any visits from the IP addresses he was using?
Is he here and reading it?

Now mr krishna is active on facebook

Right you are, my ONE POST CRUSADER, I too wonder why they call me 'Sir' and I also wonder why you have woken up so late? Who are you? Seriously. By the way, you really need to learn English. Rather a strong similarity with Roopesh/Rathi - don't you agree? By the way, I am not 83 years old as yet..........................and you may PLEASE refer to me as VC.

Mr. or Ms. Krishna???

VC Sir, we call you sir because you are a rich man...

Dear buddy VC, I was born a bit late than you and thats why i am here late. Agree my English is bad. .But still we are humans either Mr or Mrs. And nobody needs to be 83 or so to understand this.I have also read posts by you which were praising him. But dont know why this Mr and Mrs thing has to do somethin with this.

Well well.... here it is.... Come over all of you and we will drink to our health. whatever wealth we have and whatever aeromodelling wealth we wish to acquire..... All are welcome.... If you think you are old then... mind you I am going to be celebrating my 50th birthday soon..... I mean soon enough.  ha ha ha.....