Sir what about dsm2 which rx should be good for under 20grm 1s only with hobby king

I will be ordering the orange TX module which is turnigy/JR compatible with DSM2/DSMX protocol, along with the new hobbyking supermicro DSM2 compatible Rx with 2 onboard servos. The second DSM2 compatible Rx under super micro is little expensive and it has a 3axis stabilisation.

For me I am stuck with HK SuperMicro JR module with the old Rx which is no longer listed in HK and still haven't gotten it working😊. Sahil sir helped me with the issue and finally boiled down to wrong channel ordering on the Rx. So, for me to be able to re-order channel assignment on my flysky radio I will have to flash my TX with er9x or similar firmware.

PS: Issue was, the throttle was either getting assigned to rudder stick or the aileron stick. So basically the Rx channel follows the JR(TAER) channel assignment and the turnigy/flysky follows futaba (AETR)

@ Romanxdsouza

With Hobbyking

http://www.hobbyking.com/hobbyking/store/__18827__OrangeRx_R415_DSM2_Compatible_4Ch_Micro_2_4Ghz_Receiver.html
http://www.hobbyking.com/hobbyking/store/__56166__2_4Ghz_SuperMicro_Systems_DSM2_Compatible_Receiver_w_Brushless_ESC_Linear_Servos.html
http://www.hobbyking.com/hobbyking/store/__56167__2_4Ghz_SuperMicro_Systems_DSM2_Compatible_Receiver_w_Brushed_ESC_Linear_Servos.html

Looking at the voltage range of all the above claimed 1S capable receivers. I would say no harm in trying this one too in 1S setup.
https://www.hobbyking.com/hobbyking/store/__22691__FrSky_TFR6M_2_4Ghz_6CH_Micro_Receiver_FASST_Compatible.html

sir i heard that these 2 rx have brown out issues,with 1s  so why take a chance .not sure what that is brown out exactly  https://www.hobbyking.com/hobbyking/store/__22691__FrSky_TFR6M_2_4Ghz_6CH_Micro_Receiver_FASST_Compatible.html
http://www.hobbyking.com/hobbyking/store/__18827__OrangeRx_R415_DSM2_Compatible_4Ch_Micro_2_4Ghz_Receiver.html

and these 2 rx the elevator and rudder is on the left stick
http://www.hobbyking.com/hobbyking/store/__56166__2_4Ghz_SuperMicro_Systems_DSM2_Compatible_Receiver_w_Brushless_ESC_Linear_Servos.html
http://www.hobbyking.com/hobbyking/store/__56167__2_4Ghz_SuperMicro_Systems_DSM2_Compatible_Receiver_w_Brushed_ESC_Linear_Servos.html

I had pointed out brown out of Fasst micro receivers to you. It is de-linking of Receivers mid flight before ESC cut out.

Reading the discussion at the HK Yes it seems all the receivers pointed are not 1S capable. Wonder why HK makes such wrong claim of being 1S capable.

I believe these are DSM receivers 1S capable

http://www.bsdmicrorc.com/index.php?categoryID=62

That problem pointed out by intorc was with Turnigy should not be with DSM2.

Is it not possible to build a model under 20grams AUW (2S setup) ?

Air frame 7 grams
1.7 grams servos X 2
3.5 grams ESC
5.0 grams motor/prop
3.5 grams RX  
Total = 22.4 grams + 2S battery + misc.
 
Post what you guys think is an ideal setup for 20grams AUW model with 2S battery.

Sahil

Anyone have used the below?

http://hobbyking.com/hobbyking/store/__11784__TURNIGY_Voltage_Booster_for_Servo_Rx_1S_to_5v_1A_.html

Wonder what's the signal meant for?

it must be down converting Receiver signal voltage from 5 volts to Esc 1S voltage or 3.3 Volts, will micro servos work at 5V?

Sahil

Please see the Video (may be he got lucky)

http://www.hobbyking.com/hobbyking/store/HK_movies2.asp?idmovie=05efee2dbe554fa58d0ab1096d07112e

So all the concerns raised in the discussions are not actually personal accounts but only concerns based on statistics.

how are these rx http://www.hobbyking.com/hobbyking/store/__56166__2_4Ghz_SuperMicro_Systems_DSM2_Compatible_Receiver_w_Brushless_ESC_Linear_Servos.html
http://www.hobbyking.com/hobbyking/store/__56167__2_4Ghz_SuperMicro_Systems_DSM2_Compatible_Receiver_w_Brushed_ESC_Linear_Servos.html glued to the fuse ,what glue is used to mount it on too foam so it doesn harm the rx,what is the best glue in india to glue these rx/esc/servo boards to foam

off topic but check this out

http://thecornercase.blogspot.in/2014/03/micro-servos.html

are you sure glue is used to fix the parts

may be small patch of light double sided tape

try this one

http://www.ebay.in/itm/Mobile-Phone-Tablet-Touch-Screen-LCD-Double-Sided-Tape-Adhesive-Sticky-Very-Thin-/271613195183?pt=IN_Car_Accessories_Parts&hash=item3f3d6873af

what about fevicol SH

if it works sure.

Thanks for the link akhilzid

Sahil

thanks sahil and akhilzid tried fevicol SH on an old broken not working heli rx glued it to foam at two sides only .works well glued nice and strong  .but if used on a working rx board will fevicol be ok.will it not harm or spoil the rx later, sahil........?

http://www.ebay.in/itm/3mm-x-1-5mm-Rare-earth-NdfeB-neodymium-strong-magnets-N48-50pcs-/141449060785?pt=IN_Toys_Games_School_Stuff&hash=item20ef0561b1

http://www.ebay.in/itm/3mm-x-1-5mm-Neodymium-Magnet-N52-80-pcs-/111493389116?pt=LH_DefaultDomain_203&hash=item19f5861b3c

http://www.ebay.in/itm/Magnets-100pcs-Neodymium-Strong-D3mm-X-1mm-Cylinder-Rare-Earth-NdfeB-/281346117144?pt=LH_DefaultDomain_203&hash=item4181890e18

This one sold out got the last lot.
http://www.ebay.in/itm/Magnets-300pcs-Neodymium-3mmx1-5mm-disc-/261630264308?

sundaram did you ever order from then/ebay?. What was your experience.

Yes I am an old customer of ebay. Ordered one 300 lot magnets. Recd them nicely. I even got a 30mah single cell Lipo through ebay but worked out to be pretty expensive.

as sundaram sir said ebay.in is always a little bit higher price but doesnt matter paisapay will protect your money(but always check sellers reputation). and i am a regular customer of ebay.

wait till next week you should have yours'  B/w do you any similar source for square/rectangle magnets? ebay seams to have larger stuff. I was thinking why not make a disc runner BL motor (air core stator and those N52 disc magnets rotor).

Sahil

Hi Roman,

Are you still looking for Receivers PM me (will help). I have recently ordered a HK supermicro Brick BL servo 5Ch (will let you know how it works out).

I was planning to order orangeRX DSM2/DSMX RF module with 4ch receivers but found these.

http://www.dhgate.com/wholesale/search.do?act=search&sus=&searchkey=spektrum&catalog=#Homesearch201403

Guys has anyone ordered the Spektrum Receiver stuff from www.DHgate.com