RC India
Welcome Guest, please login or register.
 
Pages: 1 ... 4 5 [6]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« Reply #125 on: January 15, 2011, 07:17:21 PM »
rraghavendra
Plane Lover
Active Member
**

Reputation Power: 1 
rraghavendra has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 2
Join Date: Jan, 2011



Hi Sai,

I received the MR Moss glider ARF Kit a few days back. Thanx for the same. This is my first build and I have gone through this entire post (and others). Pardon me for some very basic questions. (1) Where is the second smaller fiber glass rod being used? (2) And I presume I have to cut the wing to the same breadth as the polyhydras (7 inches). (3) Do I use the thicker rod for the bend (connecting the polyhydral to the wing) and the thinner one for the servo connectors? (4) Does the main wing require reinforcement or should it be fine as it is?.. I am getting all excited to fly my first plane... Would appreciate your help with the answers.
Logged
 

Read
« Reply #126 on: January 17, 2011, 01:15:52 PM »
rcforall
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcforall barely matters.rcforall barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 1663
Join Date: Mar, 2009



First of all  go ahead and try out what ever you think is possible  with it . The idea behind MOSS is to allow flexibility in building it the way you  can imagine. There are no rules and regulations concerning MOSS build  Grin
Having said that  the answers to your questions are :
1) Both fiber glass tubes have to be joined together to acheive the correct length of 30 " for the fuse.
2) Some cut it to the  width of polyhydrals others leave the extra as it is to use as ailerons later the  extra width does affect the flying charecteristics  when left , but some persons I know have  adjusted to it and fly it comforably with the additional width.
3) You can use cycle spokes for bending the polyhydral  rods
4)  Depends on the wind conditions  some additional reinforcement is need if you fly in high wind areas.

Rgds
Sai
Logged

www.zuppa.io : vehicle telematics, ADAS, IoT , Drones
 

Read
« Reply #127 on: January 23, 2011, 02:51:10 AM »
abhikusab
Plane Lover
Active Member
**

Reputation Power: 1 
abhikusab has no influence.
Offline Offline

City: Hyderabad
State: Andhra Pradesh
RC Skills: Beginner
Posts: 2
Join Date: Jan, 2011



It is Indian EPP you can make an EPP plane with it  Grin
wt is EPP plane
« Last Edit: January 23, 2011, 03:13:05 PM by anwar » Logged
 

Read
« Reply #128 on: January 23, 2011, 02:54:16 AM »
abhikusab
Plane Lover
Active Member
**

Reputation Power: 1 
abhikusab has no influence.
Offline Offline

City: Hyderabad
State: Andhra Pradesh
RC Skills: Beginner
Posts: 2
Join Date: Jan, 2011



hello sai uncle this is abhi from hyderabad.
the Mr.Moss glider is delivered in this morning, can i have its documentation 
« Last Edit: January 23, 2011, 03:13:20 PM by anwar » Logged
 

Read
« Reply #129 on: January 23, 2011, 03:14:37 PM »
anwar
Administrator
Forum Hero

*****

Reputation Power: 141 
anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!anwar is awe-inspiring!
Offline Offline

City: Doha (Qatar) & Thrissur
State: Kerala
RC Skills: Advanced
Posts: 11619
Join Date: Mar, 2009

RC India - Flying and racing with open minds !



Welcome to RC India Smiley

Please use the "Search" feature of this forum, as there is already a lot of information on the Moss (including build threads) already posted.
Logged

Hangar : Please see my introduction.
RC India forum and me : About this forum.
 

Read
« Reply #130 on: August 03, 2011, 12:43:37 PM »
rcforall
Plane Lover
Forum Hero

*****

Reputation Power: 22 
rcforall barely matters.rcforall barely matters.
Offline Offline

City: Chennai
State: Tamil Nadu
RC Skills: Beginner
Posts: 1663
Join Date: Mar, 2009



Here is a Photo Guide to build Mr Moss :
https://picasaweb.google.com/rcforallin/MRMOSSASSEMBLY

Sai
Logged

www.zuppa.io : vehicle telematics, ADAS, IoT , Drones
 

Read
« Reply #131 on: July 02, 2012, 01:39:52 PM »
kamaraj74
Plane Lover
Senior Member

***

Reputation Power: 4 
kamaraj74 has no influence.
Offline Offline

City: chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 165
Join Date: Jun, 2012



what is the cg point
Logged
 

Read
« Reply #132 on: July 02, 2012, 02:14:36 PM »
Pikle6
Plane Lover
Forum Hero

*****

Reputation Power: 13 
Pikle6 has no influence.
Offline Offline

City: Navi Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 1050
Join Date: Apr, 2009

VTOL - Vertical Take Off & Landing



its been a long time since i started this thread to answer kamaraj's query

while i flew it the cg was about 7 inches from the forward end of the aircraft

Subbu

Logged

E.V.Subramanian
Yak55|EasyFly Glider 1.9m|Skyfun|Easystar II|Quad Talon V2|Mini Saturn
 

Read
« Reply #133 on: July 04, 2012, 11:23:53 AM »
kamaraj74
Plane Lover
Senior Member

***

Reputation Power: 4 
kamaraj74 has no influence.
Offline Offline

City: chennai
State: Tamil Nadu
RC Skills: Intermediate
Posts: 165
Join Date: Jun, 2012



please give suggesstion
Logged
 

Pages: 1 ... 4 5 [6]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Mr.MOSS 46" Kit Build Guide « 1 2  All »
Electric Planes
Rao 36 21591 Last post September 28, 2010, 09:12:02 AM
by hangingtough
GWS E-starter ARF step by step build guide (from rcforall)
Electric Planes
Pikle6 17 10002 Last post March 14, 2010, 01:02:06 AM
by sriharishine
May be flying with eyes closed would be the next step.
Chatter Zone
tg 1 2344 Last post October 17, 2009, 09:13:00 PM
by sahilkit
Making my First SPAD Plane - Step by step
Beginners Zone
sriharishine 18 14291 Last post June 18, 2011, 12:23:32 AM
by samlikespad
WiFi controlled plane for kids step by step build
Beginners Zone
Ravi_maker 3 2263 Last post June 10, 2018, 11:03:25 AM
by shirsa2001