RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: September 15, 2014, 01:27:11 PM »
shijin ps
Plane Lover
Senior Member

***

Reputation Power: 3 
shijin ps has no influence.
Offline Offline

City: kollam
State: Kerala
RC Skills: Intermediate
Posts: 184
Join Date: Jun, 2013




hi
this is my first foamie made from 12mm bio-foam (which i brought from PRAVEEN JOSE SIR).
SPECS:
       MOTOR:avionic cf2826 1900kv
       lipo:ind-power 11.1v 1100mah
       esc:hobbywing 40 Amp
       prop:7*4 or 6*4(as directed by iyer sir)
       2 9gm  servos
       auw:about 530 gms
need suggestions...

thanks   Hats Off
    some pics

WP_20140915_12_35_07_Pro.jpg
My first build..need suggestions
* WP_20140915_12_35_07_Pro.jpg (62.62 KB, 800x449 - viewed 504 times.)
This post has 3 more images(s)/attachment(s). Please login or register to view them.
« Last Edit: September 15, 2014, 07:57:46 PM by shijin ps » Logged

Spektrum dx9,Turnigy 9x,walkera,HK t6, Skysurfer v3,yak 54 3d,custom made Tricopter,HK Parafoil,Hausler 450 heli,hiller hover 450 heli,Ornithopter,
 

Read
« Reply #1 on: September 15, 2014, 02:55:00 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Online Online

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012



@shijin ps
Sir,
10x4.5 prop with 3s battery on 1900kv motor will probably draw far more than the rated 15amps continuous. May need to use 2s and/or smaller prop.
Check with a wattmeter if you have one. Else run for a few seconds at full power and see if motor gets hot.

As the control surfaces are huge, keep throws to a minimum, else will be too much to handle!

Best of luck.
Logged
 

Read
« Reply #2 on: September 15, 2014, 03:40:39 PM »
shijin ps
Plane Lover
Senior Member

***

Reputation Power: 3 
shijin ps has no influence.
Offline Offline

City: kollam
State: Kerala
RC Skills: Intermediate
Posts: 184
Join Date: Jun, 2013



Sorry iyer sir the prop is 9*4.5
Logged

Spektrum dx9,Turnigy 9x,walkera,HK t6, Skysurfer v3,yak 54 3d,custom made Tricopter,HK Parafoil,Hausler 450 heli,hiller hover 450 heli,Ornithopter,
 

Read
« Reply #3 on: September 15, 2014, 03:54:44 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Online Online

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012



@shijin ps
Still probably too large.
My 2826 2200kv runs a 6x4
Remember your 1900kv will run at about 20,000 rpm on 12v
Strongly recommend use 2s only with your existing prop. Check for overheating. May need to go down to 8x4 even with 2s. (Or 6x4 / 7x4 with 3s)
A lower kv (1000-1200kv) motor (in 2826 size) would be required to run a 9x4.5 on 3s
Logged
 

Read
« Reply #4 on: September 15, 2014, 05:40:04 PM »
wingmanbunty
BORN TO FLY FORCED TO WORK
Plane Lover
Forum Hero

*****

Reputation Power: 7 
wingmanbunty has no influence.
Offline Offline

State: Rajasthan
RC Skills: Beginner
Posts: 532
Join Date: Nov, 2013



nice airplane build

pls reconsider the balance of the airplane as you put servo receiver and esc all on the right side and for compensate the weight you put battery on the other side

so all these items and battery weight is same then its okay , other wise reconsider the position.

best of luck for the flying.
Logged

EAT ,SLEEP , FLY
 

Read
« Reply #5 on: September 15, 2014, 07:01:19 PM »
shijin ps
Plane Lover
Senior Member

***

Reputation Power: 3 
shijin ps has no influence.
Offline Offline

City: kollam
State: Kerala
RC Skills: Intermediate
Posts: 184
Join Date: Jun, 2013



Thank you iyer sir and wingmanbunty sir.@ wingmanbunty sir i will check it tmrw.and  will use 7*4 or 6*4 prop as guided by iyer sir.
Logged

Spektrum dx9,Turnigy 9x,walkera,HK t6, Skysurfer v3,yak 54 3d,custom made Tricopter,HK Parafoil,Hausler 450 heli,hiller hover 450 heli,Ornithopter,
 

Read
« Reply #6 on: September 15, 2014, 07:40:24 PM »
subhashjk0508
Plane Lover
Forum Veteran
****

Reputation Power: 7 
subhashjk0508 has no influence.
Offline Offline

State: Karnataka
RC Skills: Not into RC
Posts: 496
Join Date: Jun, 2014



yup as Iyer sir said need to reduce prop size!!
and from my view , i think the vertical stabilizer is a bit small, but still that wont be a probs here.hope you enjoy the maiden!!
Logged
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Need URGENT suggestions for F22 Raptor build « 1 2  All »
Electric Power
VC 25 20262 Last post February 22, 2010, 12:50:06 PM
by Ashta
Suggestions for a Yak 54?
Electric Planes
Divyam 11 7576 Last post March 13, 2011, 06:06:52 PM
by iamahuman
Need suggestions
Fuel and Engines
srivatsa 6 4631 Last post July 22, 2012, 05:54:43 PM
by AEROVISHWA
Wanted suggestions for scratch build
Electric Planes
yashodhanp 3 2727 Last post December 17, 2013, 09:00:36 PM
by sanjayrai55
Suggestions for a scratch build
Electric Planes
kushagrgoyal 11 4609 Last post April 07, 2014, 05:51:53 PM
by v2 eagle