|
Title: my first coro build Post by: sudhir31 on January 08, 2012, 06:33:13 PM http://youtube.com/watch?v=r1zjkKiZhsg
Title: Re: my first coro build Post by: anwar on January 08, 2012, 07:20:48 PM :thumbsup:
Did you follow any plan ? [Admin Note] Youtube link fixed. Title: Re: my first coro build Post by: sudhir31 on January 08, 2012, 07:29:48 PM no.
i wanted to design 1 myself Title: Re: radio control Post by: sudhir31 on January 08, 2012, 09:01:25 PM Another video
http://www.youtube.com/watch?v=mGo2eieDSaE&feature=youtu.be Title: Re: my first coro build Post by: KALYANPRODHAN on January 08, 2012, 09:02:39 PM 2nd vid not displaying.
Specs like AUw, electronics and photo please. Title: Re: my first coro build Post by: flying doc on January 08, 2012, 09:16:03 PM Seems too tail heavy. Where is the CG?
Title: Re: my first coro build Post by: sudhir31 on January 08, 2012, 11:13:57 PM AUW:550gms
esc:TowerPro w18A Brushless Speed Controller http://rchobbyaddict.com/product_info.php?cPath=24&products_id=257&osCsid=80ffbcea8dee7b86b14230b683140667 Battery: TP 20C 1800mAh-3CELL 11.1V frm rcdhamaka Servo: emax 9g servo frm rcdhamaka Motor: Emax CF 2822 @flying doc - the cg was approx at a distance of c/4 (less than) from the leading edge ill post the dimensions tomorrow Title: Re: my first coro build Post by: herbicraft on January 09, 2012, 09:09:46 AM greatly done {:)} its more appreciable cos you made it fly with your own design without following any plan :hatsoff:
will get back to you after you post your machine's spec :) Title: Re: my first coro build Post by: sudhir31 on January 09, 2012, 02:53:40 PM span: 800 mm
chord: 140 mm fuse length: 690 mm distance of leading edge form motor mount : 110 mm Title: Re: my first coro build Post by: maserati on January 09, 2012, 03:30:40 PM great build..
very nice if this is your own plan... Title: Re: my first coro build Post by: Snehal.Samar on January 26, 2012, 07:59:29 PM The design is simple and good.
could you pls show a picture of the motor area.i.e. how you mounted it? Did you broke the prop in that 1st video after landing?? Is wing also made of coro? Title: Re: my first coro build Post by: prashant_rc on January 26, 2012, 10:29:47 PM Nice built sudhir, where r u flying at in hyderabad
Title: Re: my first coro build Post by: sudhir31 on January 27, 2012, 01:17:37 AM @snehal50samarpit -
> i actually crashed the plane in my first attempt. yeah the prop broke. > yes,the wing is also made of coro. > i mounted the motor using 2 layer's of cardboard from an old record book. i'll post a similar pic soon. @ prashant i stay in malkajgiri.i fly at the back side of safilguda lake.(R.K.puram), however only in sem holiday as i study in IIST trivandrum. |