Modelers and friends .
Recently i have made  a high wing trainer. the original plans are from rc groups .
http://www.rcgroups.com/forums/showthread.php?t=1281056
sorry friend the build log is not there, will do it next time.

I have ,modified the plans a little for me.  
This is a very easy plane to make on.
The custom dimensions of the plane are as follow.

Wing span           50''     7''+ 36'' + 7'' dihederal on either side.  2.5  raised.
cord                   9''
aelorons              1.5''   12'' long
horizontal stab     7.5    2.5  elevator.
vertical stab.       6.5 long   7 height.
weight                700 to 800gm   approx.
airfoil                  Kfm3     ( behaves very well )
power plant         Cf2822 1200 kv motor.10'' prop. 1350 mh battery.

i am attacing all the details of the plane , so that any beginner can make it.
Few pics of the completed plane.

Comments and suggestions are hearty welcome  

Dihederal 
Cut the coro from the upper side ( not completely ) and made the dihederal . Inserted a small 3'' cycle spoke and glued it  to maintain its shape and then wrapped with tape.  as can be seen in the below pic.

Airfoil
The airfoil is a Kmf3 type.  First step is at 3'' and second at 2'' .  Put a small aluminium round rod. stick it with cyno and the placed a covering of packing tape.   Other details can be seen clearly in the pics .

Motor mount
cut 2 small pieces of flex board , stick them together . Then place the motor on  it , fixed it with screws .
Cut a small hole in the flex board and inserted the aluminium rod in it and put some super glue at the junction.
Tied the mount with  Zip ties.

Removable landing gears
Made the landing gears on a small peice of wood and tied with tape and zip ties , so that can be removed anytime i want . just by cutting zip ties.

The pics can explain more then words so attached all the pics.

The plane flew very well. sorry i am alone and noob also in flying , so cannot take the video.

Thanks
Manoj Sharma

Congrats for maiden!

Where do you get coro in Aurangabad?
I will be in Aurangabad this weekend. May be we can meet sometime.

Sure nikhil.

Hi swizera ,

Nice build.  . Would love to see in action 

I do have same TTP.

http://www.rcindia.org/electric-planes/build-log-russ-40-trainer-(quick)/

Currently I have upgraded mine to TowerPro ~1000 KV motor and 2200 mh 3 cell lipo and 10-4.7 prop.

-Vinayak.

Hi,
I also frequently visits aurangabad.  Pls share your details, we can meet sometime.

Thanks Vinayak and sunil .

i have a spare Motor: 1822/2600KV brushless out runner motor and 7.4V 500mAh 15C Li-Po Battery
Can i make the same like this ?
How can i get a plan
Pls help

hoping to see it flying asap

sorry bro i think you should not go with this plan according your motor specification. Better you go for a pusher plane with such high rpm motor.