Here are  some new arrivals at RCFORALL both for retail as well as Whole Sale selling :
http://stores.ebay.in/rcforallin/GLIDERS-/_i.html?_fsub=19974378&_sid=675641320&_trksid=p4634.c0.m322

Just a Brief Price list of these new arrivals :
Gliders with Plastic Blow Molded Fuselage
FPV Raptor Ex ( 2000 mm wing span ARF Version ) : Rs 7100/-
FPV Raptor Std ( 1600 mm Receiver Ready Version ) : Rs 7800/-
Pheonix ( Receiver Ready version with servos , motors etc Pre Installed ) : Rs 6550/-
Soaring Eagle  ( 1480 mm  wing span ARF Version ) : Rs 2500/-

Foam Planes
Eagle Wing ( EPO ) FPV : ARF : Rs 4900/-
Mini Sky walker ( EPO )  :ARF : Rs 3400/-
Techone POP wing ARF with Motor ( EPP ) : Rs 5000/-
INDOOR MINI CESSNA EPP RTF ( IR RADIO ) : Rs 1350/- ( http://cgi.ebay.in/CESSNA-MINI-INDOOR-RC-PLANE-/110723464529?pt=LH_DefaultDomain_203&hash=item19c7a1fd51)

All the above Prices are MRP inclusive of all Taxes .

LIMITED PERIOD OFFER FOR RCINDIA MEMBERS  TILL 15/8/2011 : FREE SHIPPING

SAI

PS ADDING A FEW PICTURES

Sai Sir, is that soaring eagle,equiped with radio and motor..? if not what will be the final needs and final price..? please..

Roopesh , the soaring eagle is an ARF Kit it needs all electronics

I will send you a mail
sai

thank you Sir..i will wait for the mail..have a nice time...

Here is the Link to the FPV Raptor EX 2000 mm wing span glider Photos.
https://picasaweb.google.com/rcforallin/August32011?authuser=0&authkey=Gv1sRgCK-V8434vNTpZw&feat=directlink

The Fuselage of  both the raptors is the same .
The 1600 mm Raptor is full house 4 channel that includes Brushless Motor, ESC and all  4 servos Pre-installed .

Sai

Here is the link to the Soaring Eagle 3 Channel Glider :

https://picasaweb.google.com/rcforallin/SoaringEagle?authuser=0&feat=directlink

Sai

sai sir is the mini slky walker posted on rcforall a 4 channel one.

Sai Uncle please book one INDOOR MINI CESSNA EPP RTF ( IR RADIO ) for me. Please PM me your number.

Oh sorry, Got the number. should ring tomorrow. Thanks for the item.

Sai Sir, I confirm having booked a Soaring Eagle Kit. I've not been able to transfer the money as yet as SBI is taking a long time to add you as a beneficiary. I will be out of station till Sunday (leaving another hour from now). Latest I will transfer the amount to your account on Monday.

Tried calling you twice today but you must have been busy. I also wanted to confirm the Eagle Wing FPV. I guess all this has to wait till Monday.

Please hold one of each for me.

Regards.

Yes 4 channel : with 4 servos : 2 x A , 1 x E and 1 x R

Sure reserved : call Bhuvana on 09381437643  for further coord


Done they are yours

sai

Thanks a ton!

Up dates on two of the models :



The reading on the Tx Display is altitude in meters and sink rate  and anemometer shows wind speed in km/h.

Here are some photos of the soaring eagle in flight . Will post video next week

sai

Good evening Sai sir..my connection is not supporting the youtube. so a doubt with you..is that transmitter OE for the craft..?

No that is our personal transmitter it is a Multiplex Royal EVO Pro 9 channel .
The Plane is not an RTF . This one needs all  electronics to be bought .
But the 1.6 M wing span  ( Rs 7800 MRP ) comes  with Power system and Servos installed  , the great thing about this plane is the fuse is Blow Molded Plastic  which is quite rugged  and being a pusher it will also be a good beginners plane with the added advantage of ailerons and a large 1.6 m wing span.

sai

Thank you Sai Sir..i am waiting to order my needed stuffs from you soon... and its all too exciting to see your new collection of air crafts..

hello sir...
i want to buy soaring eagle with all the elcetronics(rtf)..
please tell me how much it will cost...
i wan to buy asap

Just made the payment for the Soaring Eagle (Transaction ref no. IT 26856801). Pls let me know what all the kit contains and suggest me the electronics that I should use.

Regards.

Congrats VC. , who is the lucky one going to fly this maiden for the first time? Just curious

Mr sai,
How is the packing this time? In a box or wrapped around cardboard sheet? Shikra in that wrapped around sheet did take some beating before reaching me,

2 uniformed guys who stay in Shillong would be my best bet!

Sure those were the initial shikra's and we have now made it standard Box packing for gliders.
Recently I saw photos and I think videos of those very Shikra's in Avatar colors and very nice yellow and white one as well  . In fact I think Sandy got a standby fuse as well  or was it wings I don't remember to compensate for the damage.

The kits come very much intact from China to India even in flimsy packing , but sending it within India is a cross your fingers exercise irrespective of the courier you use .
So we do our best using brown  corrugated paper , double boxing  , epp , bubble wrap etc after doing all that we hand it over to the couriers and then is on  the combined luck on the buyer and seller.

Sai

i am getting 1 too

Shikra, she sure does flywell, DR and expo is a must or else she is sensitive at high speeds, yellow shikra is mine, it's avatar too is changing now, next week will be cam mounted shikra, I wish ifyou could keep a standard checklist for it , like, I didn't get control horns CA etc, sandy got them, he didn't get some stuff which I got, I am sure it is been sorted out.
Ps
My fuse and his replacement fuse both had cracked, CA zindabad, even anabond works well on shikra

Mr. Sai, please reply to my post (#16).

Hi VC ,
The Kits contains airframe with push rods , folding prop and a few other assembly parts.
You would need everything else like servos , motor , ESC , battery etc.
This is the recommended set up :
9g servo2pcs
Brushless ESC 18A
Brushelss2812/1650KV
I use a 1400 kv motor with  7.4V 1300 mah battery.

sai

got my soaring eagle  today just wanted to ask sai uncle whether he mounted the motor inside the fuse or outside the fuse as there were no assembly instructions inside

I rerversed the shaft and mounted the motor inside the motors  I have used is a hyperion 2208/ 1350 kv. And now changed it to a 2212/ 1400 kv with a 8040 prop if you find that difficult then use the motor on the out side but don't forget to use the mount sitffner that come with the kit as otherwise the firewall area is not stiff enough and induces vibration in the motor
Sai

which  battery did you use 3s or 2s as i am planning to use 3 S

 2 s. 1300 mah but depends on the motor and prop though

I received my Soaring Eagle Too, I request Sai sir to upload the pics of soaring eagle after the motor mount, as this wil help the newbie like me.

Muzammil.

Here are come Photos of the Motor mounted on the soaring eagle .
Flew her on 3 S last week end that was as great as the 2 S version but I still feel  the climb rate on take off on a 2 S is more controlable for a beginner.
Here are  some photos of the motor mounting , I hope this will explain

We flew the Raptor using an FY 21 AP.


It was  a great flight .

Sai

Hi,
Booked 2 nos IR Cessna. Paid on Friday 12 O'clock and packed and prepared for dispatch within same day and confirmed me that it may delay for consecutive holiday of Sunday and 15th august. However, after tracking, seen that it come to near my house on 14th (within 7KM ) and I got it today evening (16th Aug). Excelent information from SAI and continuous feedback.

The packaging is excellent (water proof nearly) and pictures posted. A few pictures of the plane itself also given for feedback of packaging.

From the materials contents and electronics, it is seen that as the IR heli comes within 600, the mini cessna will go down to 400Rs. or less with the mass order.

Another point of interest is that, the two pager motor, one IR sensor, one 90mAh LiPO is sufficient with mini prop and wheel. There are many programmers here who can make this tiny plane circuit with Tx. The cost will be very less than Planturico. Of course, 4 Ch planes needs pico actuators.

Sai uncle can add 6 NiMH cell with a charger to make it a really RTF. I am planned to use 1600mAH NiMH low discharge cells which comes to me 3 cell pack = Rs.70/-. and a Charger. This may be optional. I have already charger with individual autocut facility.

More Photos.

And my charger. The battery pack need to be opened and separated for the Tx.

Soaring eagle , Cessna indoor and a Biplane ( http://www.ebay.in/itm/Micro-BiPlane-782-2CH-Electric-RTF-RC-Airplane-/110771822590?pt=LH_DefaultDomain_203&hash=item19ca83dffe )  are Back in stock.

Sai

Hello Sai sir,
I'm interested in buying the soaring eagle and the electronics required for it.. I'm planning to go with the beginner combo 2 servos set up - which seems to have all the electronics required for the plane - including the 2212/10 1400kv motor... should i proceed with it?
This will be my first rc set up..