RC India

Here is my another micro build this time its a clone of the park zone vapour(night vapour)  ;D
Planning this for lost one month, Was thinking about all the ideas and alternatives and finally got some ideas to go eith and here is my build..
Sundaram sir consider this also for your unique sweep contest..  ;) ;) ;)

Hand sketched the vapour layout first and then enlarged it to an A3 sheet.. Here the plan is ready..
And ready with the materials... Started my build today morning..
Materials used
1. 1mm carbon fiber rod
2. 2.5mm cf rod
3. motor and custom gearbox from broken servos
4. gws style props from rcd
5. super glue
6. packing cover
 

made the structure using 1mm cf rods and 35gauge copper wire hardened with super glue  :) :) :)

Covered up using very thing packing cover... And shaped up to airfoil with some Styrofoam pieces...  >:D

Cool!!!!!!   :thumbsup:  :thumbsup:

Subscribed

I was just about worried no one for micro

Great going Arun.

Keep it posted.

This is the progress today and the next step will be to update with the v911 spare board as main board weighs 7gm
Current weight 18gms(incl 120 mah lipo)
total expecting around 26gms(including wires and all)

Waiting for your valuable suggetions

@sundaram : Thanks a lot sir, :hatsoff: :hatsoff: I am using the normal 6030 prop right now, I think i am getting enough thrust to lift this..
Or will try another 7mm motor with the cf prop(Rcbazaar) i mentioned that day....  :thumbsup: :thumbsup:

I hope wing is going to have a dihedral.

Some side snaps would be appreciated.

To be a slow flier give sufficient incidence to the High wing and down thrust the prop and motor with a 2 degree to the right too.

The geared motor with 6030 slow spinning prop should be sufficient thrust without prop induced roll.

For the wing span and weight even a smaller prop would have been sufficient though.

Sir i have made another with a 5030 prop.. will be using that if it is overpowered..  :)
Can save some weight also  :giggle:
Sir will make the changes and need to test after mounting the board and lipo then i want to make the changes regarding that...
Hope all to come up good..  :(
One more pic..

I don't seem to notice a dihedral or polyhedral in the wing. Large props induce roll making it necessary to provide with one of them.

Sir you are right it is not dihedral, its simple straight wings...
Here is the wing pics

Any suggestion for landing gear.. Better i should go with out landing gear...  :headscratch: :headscratch:

wow sir
great :D

@rahul:  :thumbsup: :thumbsup: :thumbsup:

Made some modifications to my vapour changed the motor to a 7mm coreless and selfmade gear system...
6030 prop.. And made the wings a bit dihedral as suggested by sundaram sir..
And flew it today outdoors not a good result but i am sure that it will fly indoors will do the maiden and update the result...
Here are the modifications...

Now the overall weight is 24 gms(150mah lipo) ... wingspan about 28cms...  :hatsoff: :hatsoff:

Seems to be like tail heavy. Some video's of flight would be nice.

You are right sir it was tail heavy but placed the lipo in the front and which balanced correctly and will put the video tomorrow after flying in some covered place.. sir suggest me a good push rod this is not working that good..

Is this the controller from banggood?? ;D ;D

S s s s s s...   ;D ;D

So here is the flying video atleast not actually the maiden, This might be the 7th or 8th maiden :giggle:
Failed many times and here the flying of my vapour..
the vid is not in a good angle as my frnd didnt actually think that it will fly...
So he was simply taking the vid.. will upload the video of flying later...
 {:)} {:)} {:)} {:)} {:)}

http://www.youtube.com/watch?v=Tlox10Bn1To

The flying was actually in an open space and little bit of wind were there i hope it can fly well indoors...  :)

nyc lil bird  :thumbsup: :thumbsup: :thumbsup:

Thanks shannon..  :)

 {:)} {:)} {:)} {:)}

Nice flying Arun.  Indoors it will be a pleasure to fly.

@sundaram sir thanks a lot... And yea,  its really fun to fly it.. i can fly for about 6-7 mins continuosly and more charge left on it..

Very Nice Build.
keep it up..

Thanks a lot sajid bhai...  :thumbsup: :thumbsup:

Here is another video... Learning to control it... :):):)
http://www.youtube.com/watch?v=ElAROw3YkPQ&feature=youtu.be

Hey Arun,

Need your help building micro. would like to do based on the available electronics and power system.
Can we still use my flysky ct6b rx for micro ?

Please let me know

Yaar you can but.. it weighs almost 10 gms after removing the outer cover right.?
And my aim was to make one below 20gms and still failed by 4-5 gms.  So micro with fly sky receiver is difficult but you can.. what you are actuallu planing for I may help you on that..

Sent from my Canvas using tapatalk 2

Looking for a camera for this... can get one of about 5 GM weight any suggestion...????

Sent from my Canvas using tapatalk 2

Or else I will take the case of a key chain cam and change the lipo to smaller one.. cut all the unnecessary stuffs.. hope I can manage to make that light enough...
 

Sent from my Canvas using tapatalk 2

goood build arun

Great Arun  {:)}

Thanks roman and dileep etta..    ;)

Arun {:)} where can I find

Prop,bat.,servo,
Pl provide all tech spec
Cost break would be good

Prop I bought from rcdhamaka normal gws style prop with self made gear system and core less motors.
Receiver and servos using here is a v911 heli spare board from banggood..
And battery I have many..
;D;D

Sent from my Canvas using tapatalk 2

Very nice  {:)}
Please provide links for the motor and prop you used..

Thanks i am using 6 and 7" props with micro 7mm coreless motor(gear reduction as well)
its homemade not bought...

Does it only have rudder controll for left or right ?
How does it go up or down without flaps?

Nice build

It has rudder and elevator control
Flaps????

Arun sir i saw the photos of the viper really good hatsoff to you :hatsoff:

I flew the original night vapour once at our flying fields. It was in the early morning (just sun up). A senior aero modeller has bought it from USA. It was damn slow flyer (very very slow, lazy bird, you can walk along with the model and keep flying) with perfect moves. I really enjoyed flying it outdoor.

@arun: I feel, Your night vapour clone is little faster. But its really nice build, very impressive and tempting me to start my own build again.

That orginal one cost 100$ plus
But mine cost only 10$
;D
And also see the second video uploaded.. which is much more slow coz I changed the prop to 7"
I can even make it slow by making the wing area much more larger..
You can choose a little more bigger  wing area to make it even slow flyer..
All the best for your build..
:)

Hello Arun,

Will u provide information for the electronic stuff?

I also want to make one indoor plane.

Thanks in advance.

Waiting for your reply