RC India
Welcome Guest, please login or register.
 
Pages: [1] 2 3  All   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: March 20, 2011, 10:45:38 PM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect




this is the Build log of Park Master 3D (http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_46&products_id=665)Everything came neatly packed, all parts in its slot, well laid out.

(a) Pretty simple, beautifully laid out directions, A few Critical areas are

     (i) Follow the instructions Meticulously, like not putting the second aileron before sliding in
     the wing, not fixing the second wheel etc

     (ii) Slots for the hinge can be tricky, used Vernier to measure the centre before making the
     slot

     (iii) Used 2218 Motor, should be good for 3D (http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=100_93&products_id=517)

     (iv) Drop Bond CA 190 is safe on this Elapor, however i used Evotite

     (v) Do not glue Undercarriage fairing to the fuse, shock transfer to the fuse will be without shock absorbed

Box.jpg
Park Master 3D Build log
* Box.jpg (42.79 KB, 800x450 - viewed 1077 times.)
This post has 2 more images(s)/attachment(s). Please login or register to view them.
« Last Edit: March 21, 2011, 06:03:53 AM by augustinev » Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #1 on: March 20, 2011, 10:56:06 PM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



whichever surface you keep the wing after applying glue make sure the wing doesn't stick to that surface

Aileron to wing root clearance is just 1-1.5 mm, make sure you have it otherwise aileron will foul with the wing

There is a 2 1/2 mm dihedral on each wing, that will be 5 mm on one wing tip if the other wing is parallel to the ground

ParkMaster001.jpg
Re: Park Master 3D Build log
* ParkMaster001.jpg (35.51 KB, 800x450 - viewed 982 times.)
This post has 2 more images(s)/attachment(s). Please login or register to view them.
Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #2 on: March 20, 2011, 11:01:44 PM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



Batt compartment is small for 2100mah 3S HK batt

ParkMaster013.jpg
Re: Park Master 3D Build log
* ParkMaster013.jpg (25.73 KB, 800x450 - viewed 879 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #3 on: March 21, 2011, 06:04:33 AM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



There is no tail wheel, any ideas Huh?
Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #4 on: March 21, 2011, 09:23:43 AM »
SunLikeStar
Forum Administrator
Forum Hero

*****

Reputation Power: 20 
SunLikeStar barely matters.SunLikeStar barely matters.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 1902
Join Date: Aug, 2010

High spirits we have: gravity we flout.



Put a wing skid there, RCD has some. Control horn can also be used as skid.
Logged
 

Read
« Reply #5 on: March 21, 2011, 01:25:33 PM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



Good idea, i got two sets in the same shipment for my Spit and Cap, will put one, will upload the photo.
Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #6 on: March 21, 2011, 02:48:59 PM »
santhosh
Heli Lover
Forum Hero
*****

Reputation Power: 7 
santhosh has no influence.
Offline Offline

City: thrissur
State: Kerala
RC Skills: Beginner
Posts: 507
Join Date: Mar, 2009



mine, with the tail skid fitted

IMG_0289_opt.jpg
Re: Park Master 3D Build log
* IMG_0289_opt.jpg (31.25 KB, 400x535 - viewed 862 times.)
Logged
 

Read
« Reply #7 on: March 21, 2011, 02:50:14 PM »
rohitgupta322
Plane Lover
Forum Hero

*****

Reputation Power: 12 
rohitgupta322 has no influence.
Offline Offline

City: Illinois, USA
State: OUTSIDE INDIA
RC Skills: Beginner
Posts: 986
Join Date: Feb, 2010



I wanted pdf plans for this. Is it available?



BTW it is a wonderful plane. Palash from IHC was flying at our college. When i asked him the price he quoted it at Rs 10,000. Luckily we have more dedicated Lhs's like RCD.
Logged

Be Inquisitive
 

Read
« Reply #8 on: March 21, 2011, 04:27:01 PM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



before sticking them together, i copied it onto a depron, this week i can bring it for you rohit, cut it and build it
Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #9 on: March 21, 2011, 06:01:53 PM »
Akshayb
Plane Lover
Forum Veteran

****

Reputation Power: 5 
Akshayb has no influence.
Offline Offline

State: Karnataka
RC Skills: Beginner
Posts: 386
Join Date: Dec, 2010



Hi Augustinev,
                  How meticulously you publish you build logs,  I really appreciated your spirit of sharing.
I see clearly good composite plastic foam and excellent design.

Thanks for sharing
Logged
 

Read
« Reply #10 on: March 21, 2011, 09:01:53 PM »
rohitgupta322
Plane Lover
Forum Hero

*****

Reputation Power: 12 
rohitgupta322 has no influence.
Offline Offline

City: Illinois, USA
State: OUTSIDE INDIA
RC Skills: Beginner
Posts: 986
Join Date: Feb, 2010



before sticking them together, i copied it onto a depron, this week i can bring it for you rohit, cut it and build it

Hey so you are coming to RCTC this week, I am excited to meet you  Grin. I thought you came to RCTC yesterday, i wanted to come but due to Holi, i didn't dare to step out of my house.
Logged

Be Inquisitive
 

Read
« Reply #11 on: March 21, 2011, 09:24:36 PM »
kartikshah
Plane Lover
Active Member
**

Reputation Power: 2 
kartikshah has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 96
Join Date: Oct, 2009



Nice going Wingco Smiley
Logged

* Multiplex EasyStar II * JR XG8 * Phoenix Tiger 60 * 1/8 Truggy * Multiplex Xeno Uni *
 

Read
« Reply #12 on: March 21, 2011, 10:12:54 PM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



Thanks Karthik

(a) reinforced Motor mount with hot glue, 2218 has the capability to tear the mount apart

(b) Went with SLS on the skid, saw Santhosh's post later

(c) Moved the batt as far back as I can , CG is at 92 mm instead of 110 mm. Any ideas?

(d) Batt woudn't fit in height had to sand the slot a bit

(e) Used 50 Amps ESC from HK, could've used 30 Amps decided to go with 50 Amps for starters, 2218 with Mystery 30 Amps ESC ran slightly warm last time around.

(f) Had only one, the best in its class Power HD Servo, therefore, decided to go with 9 gms HK servos. Hot glued it with a option of removing it later, as and when RCD/ anyone else stocks it, will replace it with power HD.

(g) Used recommended 10x4.7 Composite SF Prop (http://www.rcdhamaka.com/index.php?main_page=product_info&products_id=39)

batt.jpg
Re: Park Master 3D Build log
* batt.jpg (26.31 KB, 800x450 - viewed 971 times.)
This post has 2 more images(s)/attachment(s). Please login or register to view them.
« Last Edit: March 22, 2011, 06:12:02 AM by augustinev » Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #13 on: March 22, 2011, 06:10:38 AM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



Pricing

RCFORALL sells it for 9800+350 Indian Rupees for shipping (http://cgi.ebay.in/MULTIPLEX-PARKMASTER-/150564215584?pt=LH_DefaultDomain_203&hash=item230e539b20), website says 2x 18 gms servos,it is a typo,  you will required 4x9 gms servos

RCD Charges 6948 Indian Rupees (with 5% Vat) and i think, about 300-400 Indian Rupees for shipping

I think my motor is overpowered for the model. in less than half throttle she is doing wonderful hover.

Model has four thrust adjuster nuts with that you can adjust downthrust and sidethrust
Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #14 on: March 22, 2011, 07:19:58 PM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



With Decals Done, CG issue to be sorted out, looking for some choice

Decals.jpg
Re: Park Master 3D Build log
* Decals.jpg (39.44 KB, 800x450 - viewed 612 times.)
Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #15 on: March 22, 2011, 09:32:06 PM »
santhosh
Heli Lover
Forum Hero
*****

Reputation Power: 7 
santhosh has no influence.
Offline Offline

City: thrissur
State: Kerala
RC Skills: Beginner
Posts: 507
Join Date: Mar, 2009



waiting for the videos Head Scratching.hxt900 servos are not good for this, use some high speed servos
Logged
 

Read
« Reply #16 on: March 23, 2011, 09:30:36 AM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



was impatient that's why mounted this servo with hotglue, will remove it later
Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #17 on: March 23, 2011, 10:33:31 PM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



Will post maiden pic tomorrow , meanwhile , balanced it with a Roller bearing from center support bearing of Jet Engine, Canopy painted with Acrylic, looked for a side profile of a 3D pilot, google did not give any satisfactory options, therefore modeled myself,

Ballast.jpg
Re: Park Master 3D Build log
* Ballast.jpg (35.89 KB, 800x450 - viewed 572 times.)
This post has 2 more images(s)/attachment(s). Please login or register to view them.
Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #18 on: March 23, 2011, 10:36:56 PM »
kartikshah
Plane Lover
Active Member
**

Reputation Power: 2 
kartikshah has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Beginner
Posts: 96
Join Date: Oct, 2009



Happy Landings WingCo......... Thumbs Up
Logged

* Multiplex EasyStar II * JR XG8 * Phoenix Tiger 60 * 1/8 Truggy * Multiplex Xeno Uni *
 

Read
« Reply #19 on: March 23, 2011, 10:38:28 PM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



thank you, pics tmrw, flew today, not on my cam, on a official cam, thats why tmmrrw
Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #20 on: March 25, 2011, 11:52:07 AM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



Flew 6 sorties in the morning, sorry no pics permitted there, where i flew, few issues cropped up,

1. 2218 is way too powerful for the model. therefore changed the motor, pics soon
2. Prop and prop nut came off in hover (with 2218), thankfully i was hovering high, a quick stall turn gathered just enough speed for a kisser touchdown. i wonder how? did i not tighten it properly Huh?
3. Batt fell off in a knife edge (Wasn't fixed with a velcro, thought it fit like a glove in its slot, i was wrong) wire got wedged between fuse and the aileron, landing was with rudder and elev (Like our GWS Slowfly) , no issues there, thanks to XT 60, it held.

Rest of the three sorties were gr8

PS
maiden was as suggested in the book, 30% Aileron 50% Elev, -50 Expo on Aile and Elev, In this config she is like a very docile trainer, nothing fancy about it, now throw s/w 'B' (Thats what i assigned) she is a monster, roll plane is extremely snappy.

PPS
Pics and video soon
Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #21 on: March 25, 2011, 11:54:01 AM »
santhosh
Heli Lover
Forum Hero
*****

Reputation Power: 7 
santhosh has no influence.
Offline Offline

City: thrissur
State: Kerala
RC Skills: Beginner
Posts: 507
Join Date: Mar, 2009



[

PPSpics and video soon

] Bang Head Bang Head



Logged
 

Read
« Reply #22 on: March 25, 2011, 12:07:40 PM »
SunLikeStar
Forum Administrator
Forum Hero

*****

Reputation Power: 20 
SunLikeStar barely matters.SunLikeStar barely matters.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 1902
Join Date: Aug, 2010

High spirits we have: gravity we flout.



Which motor are you using now?
Logged
 

Read
« Reply #23 on: March 25, 2011, 03:39:49 PM »
rcpilotacro
Global Moderator
Forum Hero

*****

Reputation Power: 58 
rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.rcpilotacro is on the verge of being accepted.
Offline Offline

City: Delhi
State: Delhi
RC Skills: Advanced
Posts: 5041
Join Date: Nov, 2010

Practice, and only Practice will make you perfect



2217/6 1500 kv from sai (rcforallin)
Logged

Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can’t get it wrong.
 

Read
« Reply #24 on: March 25, 2011, 04:08:00 PM »
ujjwaana
Plane Lover
Forum Hero

*****

Reputation Power: 28 
ujjwaana barely matters.ujjwaana barely matters.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 2384
Join Date: Oct, 2009



With Decals Done, CG issue to be sorted out, looking for some choice

Gusty sir! Dont tell me you are putting a Sealing Iron to correct the CG Smiley Smiley
« Last Edit: January 15, 2017, 10:38:08 AM by rcpilotacro » Logged

Futaba 8FG Super | HK-450v2 | FA-22 Raptor |AXN Floater-Jet | FunJet | Black Horse Edge 540 | Amp Master 015 | 2.3M Big Brother
 

Pages: [1] 2 3  All   Go Up
Jump to: