Title: possibly what could go wrong Post by: rajaram on May 21, 2010, 08:51:54 AM Dear all,
i am a beginner in this field and have got an foamy with the help of rajsigma it is based on plans drawn from rc powers . now the test flight went very good (on sunday 16/05/2010) it has the following components 1400 mah brush less from rcforall 30 a esc 11.4 v 1000 mah lippo servos from rcforall tx rx futaba 6 channel Today when i tried it flies for 1 min and the props just shuts off . had a crash because of that luckily for me i had my mentor sandeep sir (ex army) who is teaching me to fly the model ,took control of it and avoided major damage we tried charging the battery and flew but again the same results what could have possibly gone wrong :headscratch: :headscratch: please guys give me your valuable suggestions and thanks in advance for the same :salute: :salute: :bow: will attach pics shortly regards Rajaram Title: Re: possibly what could go wrong Post by: hangingtough on May 21, 2010, 09:31:28 AM hi,
In a electical setup, this could be because of higher current drawn by the Motor, So check the ESC is getting extremely hot. Title: Re: possibly what could go wrong Post by: rcforall on May 21, 2010, 10:04:57 AM Check if there is some sort of resistance to the motors movement something inside which is preventing the motor from running smoothly.
This could push up the current draw . What is the prop size is it drawing excess current which is sending the ESC into auto cut off mode to prevent damage to battery. Rgds Sai Title: Re: possibly what could go wrong Post by: rajaram on May 21, 2010, 10:48:30 AM Pics pf the plane
Title: Re: possibly what could go wrong Post by: sushil_anand on May 21, 2010, 01:26:08 PM When you re-charge the battery after a flight, how much "mAH" went into the cell? This would give you some idea of the current draw.
It looks most likely that the motor is drawing excessive current, possibly because of the wrong propeller. You have not given details of your motor. Since you got it from Sai, I am sure he would be able to help you out on this. Title: Re: possibly what could go wrong Post by: Ashta on May 22, 2010, 12:08:17 PM when u say the maiden went of well, how long did it fly and was all fine that time.
if so from the maiden to next flight u might have changed some thing. However trivial it is pl lookin to this carefully. check the current on the motor always. best of luck ashta |