hi everyone ,
I had recently purchased a TW cessna EP from a hobby store , its a 4ch fully proportional plane .

My experience with it wasnt so good , i faced many problems . I changed my receiver , a servo , and a few small parts (servo arms)

Recently i havent been able to get a proper flight on it because as soon as i on the switch connecting to the ESC , the throtle opens on full .
these are a few things i tried -
1) reversing the servo from transmitter.
2) reversing the servo manually , by attaching a servo reverser
3) tried starting with throttle stick on the top i.e. full on Tx
4) changing the Rx battery pack

all these didnt help at all!!

any suggestions , pls help!!           

happy flying,
sahevaan

Looks like the ESC is bad. Try changing that ?

i am hardly finding sources who sell brushed ESC ,
have you go an extra??

Yes i have 2 spare ESCs . What size motor are you running ?

its a BRUSHED MOTOR .......
380 size .
thanks

We have GWS brushed ESC's :
ICS 100 Li ,300 Li , 480 Li and 600 Li ( basically ESC's which have lipo low voltage cut off )

as well as ICS 300 and ICS 400 J.

sai

hi ,
thanks mr sai , could send a PM reagaurdding the prices??

Check the PM and this link : http://stores.shop.ebay.in/rcforallin_ESC_W0QQ_fsubZ20514593QQ_sidZ675641320QQ_trksidZp4634Q2ec0Q2em322

sai