RC India

I had this about a year ago. (http://www.rcindia.org/electric-planes/qb-10-adapted-to-corro-electric/)

Been learning aerobatics on it  :giggle: :giggle: so after many repairs finally sent it to that great Aeromodel Resting Place in the Sky.

And, now we go :D

(http://s25.postimg.org/46lszty67/IMG_20150614_043754.jpg)

(http://s25.postimg.org/naf4g6b0f/IMG_20150614_043800.jpg)

Although I started it this morning, the newspaper did not come till 7. So I used yesterdays newspaper ;) (also legal  >:D)

(http://s25.postimg.org/uhlepsbb3/IMG_20150614_0442259.jpg)

(http://s25.postimg.org/xn1f294jj/IMG_20150614_044545.jpg)

And thats all the blanks cut out in Corro. Fuse and wing 3 mm, Tail, Fin, Rudder, Elevator and ailerons 4 mm. Firewall 100 mm ply, formers 5 mm ply

(http://s25.postimg.org/x073qgx1b/IMG_20150614_052102.jpg)

Fuse cut out. Will use corro doublers from firewall to TE of wing

Many people ask me how I cut out the holes in the formers

(http://s25.postimg.org/auiemfhof/IMG_20150614_100057.jpg)

(http://s25.postimg.org/4d43gnwov/IMG_20150614_100105.jpg)

(http://s25.postimg.org/5qvqbyvy7/IMG_20150614_100109.jpg)

 Front Former done

(http://s25.postimg.org/6k8c4l1z3/IMG_20150614_104610.jpg)

Servo Tray made

Used 10 g MG for Rudder & Tail wheel, and 9 g Plastic for Elevator

(http://s25.postimg.org/w6uhxur0f/IMG_20150614_120444.jpg)

(http://s25.postimg.org/hl3h9lu7z/IMG_20150614_163723.jpg)

Top hot-glued in

(http://s25.postimg.org/8el6mbozj/IMG_20150614_180549.jpg)

Crutch cum battery tray (bottom)
(http://s25.postimg.org/5n1wvpqgv/IMG_20150614_195034.jpg)

Crutch cum battery tray (top) and hatch opening

(http://s25.postimg.org/ew8ojkoqn/IMG_20150614_195044.jpg)

Main Landing Gear made from 3 mm Spring Steel

(http://s25.postimg.org/c4pesyq7z/IMG_20150614_195244.jpg)

(http://s25.postimg.org/9yv3ygmrj/IMG_20150614_195358.jpg)

 :thumbsup: best of luck sir ji , waiting for updates  (:|~

All coro men should be banned :giggle:

Awesome as usual :thumbsup:

A bit early for 2016 sweepstakes perhaps? ???

Thank you Bunty  :thanks:

Tantragna, thanks. Hey, if you can't beat ém, join ém  :giggle: :giggle:

You also make some corro models. And find out how ''easy'' they are to build  ;) ;)

Now what does that mean  ??? ??? ???

Sir, Iyer sir meant to correct the year 2016 to 15..

Oh!!

 :thanks:  This is what happens as one gets older  :violent:

LG complete, taken out & painted

(http://s25.postimg.org/w24itenun/IMG_20150615_055303.jpg)

(http://s25.postimg.org/5c2u1x3jz/IMG_20150615_102829.jpg)

(http://s25.postimg.org/r0x4s1ge7/IMG_20150615_064017.jpg)

Wing construction. 3 mm Corro, 6 mm Balsa Spar

(http://s25.postimg.org/lgknhehj3/IMG_20150615_072747_BURST1.jpg)

(http://s25.postimg.org/4hbp256bj/IMG_20150615_085904.jpg)

(http://s25.postimg.org/pn5hwqh4v/IMG_20150615_085919.jpg)

4 mm Corro Ailerons

(http://s25.postimg.org/tgyy5vygv/IMG_20150615_095808.jpg)

(http://s25.postimg.org/ze2tmpflr/IMG_20150615_095813.jpg)

Glue

(http://s25.postimg.org/wy108uxj3/IMG_20150615_102818.jpg)

(http://s25.postimg.org/4ccj67oe7/IMG_20150615_103648.jpg)

(http://s25.postimg.org/setd1351b/IMG_20150615_104032.jpg)

Super fast build Sanjaya Sir  {:)} All the best  :thumbsup:

Thank you Nithinraj :D

Wingtip

(http://s25.postimg.org/cx5uxdykf/IMG_20150615_122526.jpg)

(http://s25.postimg.org/43eygablr/IMG_20150615_122753.jpg)

Fuse - tail feathers fitted (hot glue)

(http://s25.postimg.org/7e3bg61j3/IMG_20150615_211025.jpg)

Servos, Pushrods & Horns fitted

(http://s25.postimg.org/rwy7l8fgf/IMG_20150616_060838.jpg)

(http://s25.postimg.org/tapugjepr/IMG_20150616_060856.jpg)

show me more  (:|~

Fuse bottom fixed

(http://s25.postimg.org/wmsqnkvun/IMG_20150616_100309.jpg)

(http://s25.postimg.org/8hnfs4m67/IMG_20150616_100318.jpg)

ESC hatch fixed

(http://s25.postimg.org/xdlgtcy7z/IMG_20150616_105053.jpg)

Radio Control set up

(http://s25.postimg.org/cw0ihpm4f/20150616_203516.jpg)

Wing cut out made in fuse; wing installed

(http://s25.postimg.org/wcl848h8f/20150616_200211.jpg)

(http://s25.postimg.org/ep3f617b3/20150616_200340.jpg)

 :thumbsup:

Sir , from where you got Spring steel landing gears and push rods material ?

1.Landing gear: I bought spring steel wire from a spring manufacturer, and bent it myself. Reply %7 shows
2. Pushrods: Bare rods I normally use cycle spokes - up to a 25 size I use 2 mm (depends of course on the length of the rod)  In this model I used 2 mm cycle spokes for the aileron pushrods

I use commercial wire-in-tube rods too - see http://www.hobbyking.com/hobbyking/store/__13036__Control_Rod_ABS_Sleeve_1pc_bag_.html

In this model I used that for one pushrod, for the other, I had bought 1.2 mm spring steel wire, and used that with a PVC tube. This system of wire-in tube needs anchoring at several points, and is, I find, one of the best ways to make pushrods

Fuse build complete

(http://s25.postimg.org/m57a5kke7/20150616_205657.jpg)

Decorating with vinyl trim

(http://s25.postimg.org/nmo53dzr3/20150617_081050.jpg)

(http://s25.postimg.org/ufohznqkf/20150617_070018.jpg)

(http://s25.postimg.org/eqhyd6yin/20150617_104831.jpg)

(http://s25.postimg.org/dbbsaq81r/20150617_104900.jpg)

(http://s25.postimg.org/e3eg9xc8v/20150617_104846.jpg)

Final Size/Specifications:

Span: 990 mm
Length: 735 mm
Wing Area: 16 dm2
AU Weight: 880 grams (with 2200 mah LiPo)
Power: 2836-1150, 9*6, 2200 mAh 3S, 40 A ESC

(http://s25.postimg.org/q7tpqwp4v/20150617_105433.jpg)

(http://s25.postimg.org/fmefsn873/20150617_105451.jpg)

(http://s25.postimg.org/rpjrg7j9b/20150617_105554.jpg)

Maiden and video shortly

(http://s25.postimg.org/76ovb55bz/20150617_105515.jpg)

(http://s25.postimg.org/dlnw7tc1r/20150617_105531.jpg)

Sanjay sir is the rajnikanth of RC India  ;D :salute:
Great build sir!

Out of the world construction Sir!!!

What we can expect from your build is Ultimate Quality; Ultra Stable Flight character & Gorgeously Gorgeous models ;-).

Alass!! I am not there to test fly this beauty!!

  (:|~ (:|~ (:|~ {:)} :goodjob: :iagree:

That was a fast build!
Looks amazing.

This definitely is a very nice and fun plane to fly. Regular at the airfield.

Thanks  :giggle: :giggle: :giggle:

 :thanks:

Thanks Arvind - miss you too  :salute:

Thanks Bunty  :thanks:

Fast and looks stable. .. awesome sanjay sir

Thanks Maahin  :thumbsup: :thumbsup: :thumbsup:

Thanks Darshan: will come to know soon  ;)

beautiful build sanjay sir.

Thanks very much Manoj  :thanks:

 :hatsoff: sanjay sir.another beauty (:|~. nothing can stop you from scratch building.awesome speed and detailed build log.all the very best for maiden flight.

Very nice build {:)} {:)} {:)}

Thank you Shijin

Thank you Kiran

 :thanks:

A beauty. Its a FB (fast build) instead of a QB (quick build).  {:)}

 :rofl:

Thanks so much Ashok-ji  :salute:

It's a BEAUTY from every angle.

Thank you Nitesh. Now, you must make and fly something for these sweepstakes

Yes sir I will surely do but after my FA-1 exams. After that I will be a little free  ;)

Bad weather whole weekend  :( :(

Maiden next weekend  >:(

At the field

(http://s25.postimg.org/71vof2rlr/P1030985.jpg)

Maiden. Landed in 2 minutes for adjustments: trims were out (too much right, prefer setting mechanically)

https://youtu.be/8VCaezo2aeI (https://youtu.be/8VCaezo2aeI)

After trimming

https://youtu.be/bZruYpY46wM (https://youtu.be/bZruYpY46wM)


And this completes this entry for the sweepstakes

Ahha another successful model   (:|~ {:)}.

Congratulations Sanjay Sir ... Thumpsup

 :thanks: Shijin & Doc  :thumbsup:

Congrats!!!

Beautiful as usual. What's next?

awesome sanjay sir

beautiful build sir :)
As usual amazing :hatsoff:

Thanks Nitesh, Ashok-ji, Jayant and Doc!

 :thanks: very much for the kind words and continuous encouragement

 :bow: :bow:

Thanks Bunty  ;D

That's okay.. what's next? :giggle: {:)}

Birdie 10. Already started  ;D

Beautiful Bird..!!

Thank you Vishal  :thanks:

Built another, as this one gave up it's soul

(https://s25.postimg.org/6mswr14ov/IMG_20170128_105858.jpg)

(https://s25.postimg.org/6bbge9o8v/IMG_20170128_105930.jpg)

Eagerly waiting to fly this beauty sir (:|~ (:|~