I had this about a year ago. (http://www.rcindia.org/electric-planes/qb-10-adapted-to-corro-electric/)

Been learning aerobatics on it  so after many repairs finally sent it to that great Aeromodel Resting Place in the Sky.

And, now we go





Although I started it this morning, the newspaper did not come till 7. So I used yesterdays newspaper (also legal  >)

And thats all the blanks cut out in Corro. Fuse and wing 3 mm, Tail, Fin, Rudder, Elevator and ailerons 4 mm. Firewall 100 mm ply, formers 5 mm ply

Fuse cut out. Will use corro doublers from firewall to TE of wing

Many people ask me how I cut out the holes in the formers

 Front Former done

Servo Tray made

Used 10 g MG for Rudder & Tail wheel, and 9 g Plastic for Elevator

Top hot-glued in



Crutch cum battery tray (bottom)


Crutch cum battery tray (top) and hatch opening

Main Landing Gear made from 3 mm Spring Steel

  best of luck sir ji , waiting for updates 

All coro men should be banned

Awesome as usual

A bit early for 2016 sweepstakes perhaps?

Thank you Bunty  

Tantragna, thanks. Hey, if you can't beat ém, join ém  

You also make some corro models. And find out how ''easy'' they are to build  

Now what does that mean  

Sir, Iyer sir meant to correct the year 2016 to 15..

Oh!!

   This is what happens as one gets older  

LG complete, taken out & painted

Wing construction. 3 mm Corro, 6 mm Balsa Spar

4 mm Corro Ailerons

Glue

Super fast build Sanjaya Sir  All the best 

Thank you Nithinraj

Wingtip

Fuse - tail feathers fitted (hot glue)



Servos, Pushrods & Horns fitted

show me more 

Fuse bottom fixed





ESC hatch fixed

Radio Control set up

Wing cut out made in fuse; wing installed

 

Sir , from where you got Spring steel landing gears and push rods material ?

1.Landing gear: I bought spring steel wire from a spring manufacturer, and bent it myself. Reply %7 shows
2. Pushrods: Bare rods I normally use cycle spokes - up to a 25 size I use 2 mm (depends of course on the length of the rod)  In this model I used 2 mm cycle spokes for the aileron pushrods

I use commercial wire-in-tube rods too - see http://www.hobbyking.com/hobbyking/store/__13036__Control_Rod_ABS_Sleeve_1pc_bag_.html

In this model I used that for one pushrod, for the other, I had bought 1.2 mm spring steel wire, and used that with a PVC tube. This system of wire-in tube needs anchoring at several points, and is, I find, one of the best ways to make pushrods

Fuse build complete

Decorating with vinyl trim

Final Size/Specifications:

Span: 990 mm
Length: 735 mm
Wing Area: 16 dm2
AU Weight: 880 grams (with 2200 mah LiPo)
Power: 2836-1150, 9*6, 2200 mAh 3S, 40 A ESC

Maiden and video shortly

Sanjay sir is the rajnikanth of RC India 
Great build sir!

Out of the world construction Sir!!!

What we can expect from your build is Ultimate Quality; Ultra Stable Flight character & Gorgeously Gorgeous models ;-).

Alass!! I am not there to test fly this beauty!!

 

That was a fast build!
Looks amazing.

This definitely is a very nice and fun plane to fly. Regular at the airfield.

Thanks 

 

Thanks Arvind - miss you too 

Thanks Bunty 

Fast and looks stable. .. awesome sanjay sir

Thanks Maahin  

Thanks Darshan: will come to know soon  

beautiful build sanjay sir.

Thanks very much Manoj 

  sanjay sir.another beauty . nothing can stop you from scratch building.awesome speed and detailed build log.all the very best for maiden flight.

Very nice build

Thank you Shijin

Thank you Kiran

 

A beauty. Its a FB (fast build) instead of a QB (quick build). 

 

Thanks so much Ashok-ji 

It's a BEAUTY from every angle.

Thank you Nitesh. Now, you must make and fly something for these sweepstakes

Yes sir I will surely do but after my FA-1 exams. After that I will be a little free 

Bad weather whole weekend 

Maiden next weekend 

At the field

Maiden. Landed in 2 minutes for adjustments: trims were out (too much right, prefer setting mechanically)

After trimming




And this completes this entry for the sweepstakes

Ahha another successful model    .

Congratulations Sanjay Sir ... Thumpsup

  Shijin & Doc 

Congrats!!!

Beautiful as usual. What's next?

awesome sanjay sir

beautiful build sir
As usual amazing

Thanks Nitesh, Ashok-ji, Jayant and Doc!

  very much for the kind words and continuous encouragement

 

Thanks Bunty 

That's okay.. what's next?

Birdie 10. Already started 

Beautiful Bird..!!

Thank you Vishal 

Built another, as this one gave up it's soul

Eagerly waiting to fly this beauty sir