|
Title: Reincarnation of my existing coro slow stick - SPAD Post by: kamaraj74 on October 26, 2012, 09:25:28 AM This my updated and re modification of my previous coro slow stick
Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kamaraj74 on October 26, 2012, 09:26:47 AM More images and detail
total weight of this modal is 450 grams without battery Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: arun.sreelakam on October 26, 2012, 10:34:17 AM sir how you made those clamps in the alum fuse? which holds the wing?
and what is the wingspan? and motor? Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kamaraj74 on October 26, 2012, 10:57:44 AM Hi arun
i cut 4 pieces from aluminium L angle and make hole and fixed with fuse for wing mounting i attached small bolt in the edge of L angle wing span 44 inch and chord 7 inch fuse length 28 inch motor Turnigy L2210-1400 Bell Style Motor (210w) Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: arun.sreelakam on October 26, 2012, 11:17:07 AM nice build sir.. even i have made a trainer and not done the maiden yet.. was waiting for a lower kv motor and not its ready to fly
http://www.rcindia.org/electric-planes/home-made-coro-trainer-plane-50'-span/msg117854/#msg117854 now the motor changed to (emax2822) need good support for wings thats why planning for such clamp.. give me ur suggetions for my plane sir.. :) :) Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kamaraj74 on October 26, 2012, 11:23:24 AM hi arun
the clamp using as wing pod for mounting wing and also landing gear all four clamp wight is just 8 grams only it is much stronger than foam this sunday my two models will maiden fly my another model link http://www.rcindia.org/electric-planes/my-spadet/msg119264/#new Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: arun.sreelakam on October 26, 2012, 11:27:39 AM yeh i was following your spadet already,... builds are very nice sir.. dont forget to take the vids... and upload.. will be waiting on sunday.. (:|~ (:|~
all the best for your maiden :) :) :) :) :) Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kamaraj74 on October 26, 2012, 11:50:22 AM Thank u arun
Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kamaraj74 on October 29, 2012, 12:02:47 PM flying video on board camera
http://www.youtube.com/watch?v=GiE4hqzmUxw Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: VMaliakal on October 29, 2012, 12:08:07 PM plan for this plane?
Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: rastsaurabh on October 29, 2012, 01:31:01 PM Nice built.
what is the wing aerofoil shape ??? Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kamaraj74 on October 29, 2012, 01:47:58 PM full flat wing
Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: akky on October 29, 2012, 02:06:38 PM Coool ...i have always been a fan of Stick planes ....reminded me of my perky ;D
http://www.rcindia.org/electric-planes/meet-perky-my-new-scratch-built-stick-glider/ Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kartikmadhira on November 13, 2012, 01:35:07 PM plans???????????
Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kamaraj74 on November 14, 2012, 10:58:00 AM my coro slow stick completing 30th fly
still it is alive Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kumardasai on November 14, 2012, 01:28:27 PM nice build, really looking good.
Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: sameermaha on November 14, 2012, 05:13:25 PM hello sir...... just enjoyed ur slow stick video..... {:)} {:)}
consider me a freshman .... i am planning to build a foamy...... but little concerned about which battery to use for max flight time...... i wud be using a 1300 kv Micro brushless motor ... and a 2200 mah 3s battery....... what do u think wud be the possible flight time..... wud the battery be too heavy for the foamy?? Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kamaraj74 on November 14, 2012, 05:54:49 PM yes ofcourse, the battery 3s 22oo mah comes around more than 200 grams
better you try 2s 1300 mah it comes 70 grams for foamy model maintain auw below 500 grams Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kamaraj74 on November 16, 2012, 10:54:00 AM flying video
http://youtu.be/UcpjpSRXRcU Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: sameermaha on November 20, 2012, 10:39:37 PM :bow:
Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kartikmadhira on November 21, 2012, 12:56:26 AM sir can u gimme plans for this plane?
Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kamaraj74 on November 21, 2012, 09:43:24 AM sure kartik i will post the dimention
Title: Re: Reincarnation of my existing coro slow stick - SPAD Post by: kamaraj74 on December 19, 2012, 04:41:21 PM Hi friends,
My CoroSuperStick has completed 50th flying. iam very happy and proud about my corosuperstick http://youtu.be/h-936K7blFs |