The story so far....
The RTFizz is made from EPP & Carbon fibre, which makes it very tough indeed. The large wing area makes it slow and stable whilst very aerobatic when you increase the throws.
In the pictures....The RT FIZZ with all the electronics that go into it, GWS 8x4 prop, yet to decide on Turnigy 2204-14T or Turnigy 3020-1200, MAG 8 - 12 Amps ESC, Flightmax Lipo 2S 500mAh, and 4 EM 3.7g servos 1kg torque .1 sec speed.
"I just test fitted some stuff, CG on the dot, no wing shifting needed. using carbon control rods.
The body is 60g, the items that r in front of the flat out are 87g thats 147g, add anoyher 23g for push rods, clevices, horns etc, total may come to 170g. How am I doing for weight.
"
Ramesh
Ramesh.......This is what the book says;
The RTFizz is made from EPP & Carbon fibre, which makes it very tough indeed. The large wing area makes it slow and stable whilst very aerobatic when you increase the throws.
Spec:
Wingspan: 26 inches
Flying weight 160-200 grams ... See more
Power system:
Low KV (1100-1400) 60w motor
Propeller 8x6
To finish
540-740mah 2S Lipo Battery
3 x Micro servo 3.7-5g
1400kv outrunner Motor
Prop & Adaptor
12Amp ESC
Micro receiver
4 Channel Transmitter
Lipo compatible charger
You could not be doing better... Keep it up mate!!! Deepak
"I was working totally with my experience, and amazingly a lot of my calculations of the items I am putting in match. not bad at all!!!"
Ramesh