scratch built foam n basswood 24ws these wing made yesterday work in progess for fuse

k so here is the full fuse basswood  every thing scratch built even wheels ,landing gear a bit weak thou ,attached only 1 servo need 2 buy another

and here  is how the entire 24ws  stick plane looks  only the plane weighs 100grams working on electronic now

have 1300mah ,18A ESC, looking for a good motor now plane with out electro is 100grams,rest of electronics (esc,batt,servos,push rods) with out prop and motor is around 124grms,

Roman the wing and the fuse is looking beautiful.

thank u swizera, its my own plan actually just trying want it 2 be very very slow flying searching for a good motor as it is 100grams,and my electronics is around 124grams with 18A ESC and 1300mah ANY SUGGESTIONS

k got the servos attached, the entire plane  with every thing prop,18A esc,rx,battery  1300mah,..etc   except MOTOR  the weight is now 190 - 200grams i have still not decided on the motor please advice(prop and motor) as i want it to be 24ws and very very slow flyer.

I don't see the beginning of a build here either    Only a servo for the elevator seems to be the only thing not fixed on the very first picture itself.  Did you post a half done model, which was in progress before the sweepstakes started ?

Comments ?

the day the part was made was the day the pic was taken

I am sorry if you feel your work was being discounted... that was not my intention.  I really wanted people to build something (even ARF) from its beginning and take it to its maiden. If I did not stick to my self imposed rules, it would be very unfair to people who put in all the efforts to follow the instructions/rules.

If you can understand/believe it, my stand on this is also a confirmation towards the fact that we are serious about promises we make, and the rules we impose upon ourselves.

 

u can call both planes out of the sweep thanks