Hello Friends...!

I have been working on a P51D Mustang...

And now it is about to complete.
All made up of 5mm BioFoam.
And "Fevical decoration Glue" for gluing.

The specs are:

Wing Span: 33"
Wing Area: 220 sq Inch

AUW would be around 500gms.

Going to use following electronics:(All ordered from Hobbyking and became a platinum member. Ha Ha  )

Turnigy 1000mAh 3S1P 20C Lipo
4x 9gm servos(two for ailerons, one one for Rudder and elevator)
Hobbyking SS series 25-30A ESC

And HK 2.4Ghz 6Ch Rx/Tx to fly it.

I need the suggestions of all the experienced aeromodellers for which motor should I use?
Please suggest me with a link.

And below are the photos showing my progress from day 1...

great work keep it up

Pics Showing the rudder servo...

And the last one "DSCN2238". showing the Wing with a slot to see through. So, the beginners can guess what I did...

First I made 5mm Bio foam spar and reinforced with carbon fiber rods.Then skinned the whole wing frame with 5mm bio foam(This was the toughest thing in this project for me). So, It is more stronger on a compromise to have more weight.

Please note that according to the original plan. Wing was supposed to be skinned with 3mm Foam sheet which is not available in Indore. So, I used 5mm.

More photos of wings...

For the information...

I redesigned the wing to get the proper lift and smaller stall speed so i could also fly it slowly to teach myself and my Brother. I used Motocalc 8.0 for the Airfoil design.

The wings are semi symmetrical with a 0.75" Spar inside wing.

Here are the photos when I mounted wings on fuselage for the first time to see the appearance.

One thing may have been noticed that the Original P51D Mustang is a lower wing aircraft. The Lower Wing aircraft is supposed to be unstable in the air as said by Vikas sir when I went to their place. Thank you Sir.

Anyways, So I shifted the wings slightly upwards. Now, It became a Mid Wing. The proposed places where I am going to mount the battery pack and ESC then came under the wing and thus giving the Higher Wing type performance.

Fuselage profile and Wings are completed. The rudder and Elevator servos are mounted.
So, I started to cover the profile with bio foam itself. The original plan shows the fuselage skin is 3mm Foam. But that was not available so, Sliced  the 5mm Bio foam to get its half thickness. It also became easy to bend the sheet according to the original Beautiful P51D fuselage.

The fuselage skin is cut and glued in parts according to each profile section. And to secure and prevent the skin from peeling off, I used the tape which I know as medical tape (Those white one self sticking tape which is used for dressing) So, I won't have any problem while painting it with Acrylic Colors after completion of this beauty.

Thanks Sir...

Some more pics on the fuselage skin.

In last picture, the rudder and elevator servo leads coming through the skinned portion to the place where the Rx would be fixed...

This mouse packing cover (In DSCN2340) is going to be the cockpit of my P51D...

Looks like almost complete now with That mouse cover cockpit...

Now, That's all about my build.

It's My 100th post on RcIndia. Yippie...! 

Well, I keep A beautiful P51D Mustang picture as my desktop background, to keep my self inspired. 

And It's too late to sleep now. It's 3:09AM already in my watch.  

I should sleep now to keep the building work running on Sunday itself.

Please don't forget about the suggestion asked in very first post of this topic.

Will be updating soon with the new pics...

Thanks.

Happy Weekend.  

Super effort!!!!

What about the suggestion asked in very first post of this topic?

Thanks a lot for the comment.

Wow! looks very good.

Thanks.

WOW great efforts!!!!!

for motor try using 2212 with lower Kv say 1200 or 1500 kv, available with RCtimer. cell count and ESC seems to be good for this model!!!

wish all the best !!!

Awesome  . Looks great  . Great work  .

Too good Sumeet !!!  That is really fast... and you have made it really well.  Hope to see the maiden soon... Keep us posted.

All the best 

Thanks to all the friends.
 

And a great thanks for the suggestion.

As per ashJR7202 suggestion: I found the motor specs as follows:

Model:  2212-10
Motor size: Ф28*26mm
Shaft size: Ф3.175*37mm
Weight: 50g
KV(rpm/v): 1400
Max Power: 205W
Battery: 2-3Li-Po
Test Prop: 9x4.7/7x4
Ri(M Ω): 0.078
ESC(A): 30A

Now plz suggest me the appropriate propeller for using with this motor. I need the Thrust to weight ratio to be greater than 1:1.

great job....which material is this. is this fly

It is Bio foam. When you sand the biofoam with sand paper, you will see the powder as the result unlike the thermocoal, which disperse in very tiny balls when scratched...

abt prop, try using suggested one!! 9x4.7. but i think even 8" would be fine!!!! abt 7x4 as mentioned in the spec will give little bit less thrust but will give more flying time!!!! so for experiment try 8 & 9 both type of props.

2212 is really nice motor, get lower kv and use it in 3d foam planes upto 34-36" wingspan!!!!!
get higher Kv and use it in 27-30" foam jets!!!!! it is all rounder motor for most electric planes!!!

cheers
Ashish

I mixed ch1 and ch6 to get flaperons with ailerons
Here is the Video...!
Sorry for the poor quality

nice work dude........... where is the motor. and shape the wings in aerodinamic.