RC India
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: January 16, 2022, 02:08:43 PM »
ambiSk
Plane Lover
Active Member
**

Reputation Power: 1 
ambiSk has no influence.
Offline Offline

City: Greater Noida
State: Uttar Pradesh
RC Skills: Beginner
Posts: 4
Join Date: Jan, 2022




I am using FS-i6X transmitter(Tx) with FS-iA6B receiver(Rx). I have connected 30A ESC to a 4500mAh 11.1V LiPo battery(fully charged) with a 2300kv FPV BLDC, whereas the signal pin of ESC is connected to Channel 3 of Rx, and connected a micro servo 9g(SG60) at Channel 1 of Rx. The problems I am facing are as follow:
- When I am rotating the axis of the servo the BLDC restarts
- When BLDC is at >50% throttle and if I try to rotate the axis of the servo motor, BLDC goes off and restarts
- Sometimes I am unable to use servo when I have throttled up the BLDC.

My Rx and Tx are at Factory Settings
Someone guide me on what to do?
Logged
 

Read
« Reply #1 on: January 17, 2022, 09:55:52 AM »
Mohammed Naveed
Plane Lover
Forum Hero
*****

Reputation Power: 14 
Mohammed Naveed has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 893
Join Date: Jul, 2015



Hi AmbiSK! Welcome to the forum!
We need one more detail for you.
Can you specify which ESC you are using?
The issue you are facing is a brown out. Your receiver isn't able to get a stable power so it rebooting again and again.
I suspect the ESC is faulty or the UBEC.

Regards,
Mohammed Naveed
Logged
 

Read
« Reply #2 on: January 17, 2022, 10:47:59 PM »
ambiSk
Plane Lover
Active Member
**

Reputation Power: 1 
ambiSk has no influence.
Offline Offline

City: Greater Noida
State: Uttar Pradesh
RC Skills: Beginner
Posts: 4
Join Date: Jan, 2022



Hey Mohammed Naveed,
Thanks for replying and apologies for the late reply.
I am using 30A FPV ESC.
You can go through this link -> https://drive.google.com/file/d/1kKYbgDDNg7A63HxKr0BHZNE-Ap08m6Fp/view?usp=sharing
I have demonstrated what's exactly happening.
Please let me know what should I do now.
Thanks
Logged
 

Read
« Reply #3 on: January 18, 2022, 12:12:33 PM »
Rooster
Boat Lover
Forum Hero
*****

Reputation Power: 6 
Rooster has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Intermediate
Posts: 509
Join Date: May, 2009

Boat Lover



Try following
1. Try calibrating ESC.
2. Try with another ESC.. Guess this should not happen.

I think the motor is drawing current over the ESC limit, hence the ESC is getting initialised.
Logged
 

Read
« Reply #4 on: January 18, 2022, 12:24:40 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012



@ambi SK,

Strange!

Another possibility is that either ch 1 or 3, or both are malfunctioning.
Try the servo on ch 2 or 4.

If you have a 4.8v nimh battery, power the Rx with it and check if servo works ok on all channels.

Best of luck.
Please post updates as it is quite intriguing...

Regards
Logged
 

Read
« Reply #5 on: January 19, 2022, 08:29:20 PM »
Mohammed Naveed
Plane Lover
Forum Hero
*****

Reputation Power: 14 
Mohammed Naveed has no influence.
Offline Offline

City: Bangalore
State: Karnataka
RC Skills: Intermediate
Posts: 893
Join Date: Jul, 2015



@ambi SK,
Also do check your solder joints between esc and battery! Can you provide a link from where you purchased the esc.

Logged
 

Read
« Reply #6 on: January 20, 2022, 04:13:19 PM »
K K Iyer
Global Moderator
Forum Hero
*****

Reputation Power: 61 
K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!K K Iyer is a rising star!
Offline Offline

City: Indore
State: Madhya Pradesh
RC Skills: Intermediate
Posts: 5165
Join Date: Jan, 2012




Another possibility is that either ch 1 or 3, or both are malfunctioning.
Try the servo on ch 2 or 4.

If you have a 4.8v nimh battery, power the Rx with it and check if servo works ok on all channels.


Power the Rx with the Esc but remove the motor.
Then check if the servos work properly on ch 1, 2 & 4.
Logged
 

Read
« Reply #7 on: May 05, 2022, 09:32:16 AM »
ambiSk
Plane Lover
Active Member
**

Reputation Power: 1 
ambiSk has no influence.
Offline Offline

City: Greater Noida
State: Uttar Pradesh
RC Skills: Beginner
Posts: 4
Join Date: Jan, 2022



Hey guys thanks for your guidance. I found out that the problem was with the ESC. The IC was damaged causing it not to propagate enough electricity to all the electronics. I switched to Emax BLHeli Series 30A, and it's working now.
Logged
 

Pages: [1]   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
ESC FOR BLDC MOTORS
Wanted
vijeeshkumar 2 4467 Last post January 14, 2011, 07:36:58 PM
by abhay
Need help selecting quadcop motors. NTM Prop Drive Vs Turnigy BLDC motors
Electric Power
Power_user_EX 3 6179 Last post May 20, 2012, 10:37:53 AM
by Dharmik
want BLDC motors 1200 KV
Wanted - Completed
joker9516 0 1867 Last post March 10, 2014, 09:53:59 PM
by joker9516
Need non working 2g servo/linear servo
Wanted
kiran rc 0 926 Last post October 07, 2016, 01:18:34 PM
by kiran rc
avionic BLDC running like break dance ...not working properly
Multirotors
krupashree 3 1914 Last post January 27, 2017, 09:41:28 PM
by krupashree