Title: spad electric Post by: sbajare on June 05, 2011, 07:41:52 PM hi,
built a small park flyer from 2mm coro and foamboard. pics below Title: Re: spad electric Post by: akky on June 05, 2011, 08:55:40 PM from where did you source the foam board and at what price...
where is this foamboard normally used and what are its applications what else does that shop sells from where you sourced the board Title: Re: spad electric Post by: sbajare on September 06, 2011, 08:15:48 PM hi,
was planning to make a model which could be built fast like in one day flat. with less effort. below are pics. wing is not yet built as i have different plans. Title: Re: spad electric Post by: Nehutech on September 06, 2011, 11:30:42 PM liked the design buddy...................... {:)} {:)} will try the same................................ Title: Re: spad electric Post by: ritz on September 07, 2011, 08:33:04 AM hllo sbajare sir
heads off !! to your talent can u help me out in making of landing gears my plane wg is 1200 gms & i m not able to make good landing gears Title: Re: spad electric Post by: sbajare on September 07, 2011, 09:19:41 AM hi,
sure can help u. for that wt you need 3mm spring steel wire. will send you pic's and details Title: Re: spad electric Post by: sbajare on September 07, 2011, 09:37:32 AM hi,
this are the best for models upto 1.5kg. http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=3856 Title: Re: spad electric Post by: ritz on September 07, 2011, 01:37:14 PM spring steal is not available here do u have any alternative
|