Span: 1200 mm
AUW: (Airframe) 980 grams
Motor: TGY 3536-1450 KV, ESC: 60 A
Pro: 11*5.5 (to start with)

This is proposed to be a fully aerobatic sports model, with full 3D capabilities

No real plan as such.

I used the dimensions of fuse & tail feathers from: http://www.rcgroups.com/forums/showthread.php?t=1076019, and for the wing, found a plan on the net and scaled to 1200 mm Span. The rest I developed as I built 

Material: Wing 3 mm Corro, Fuse 3.5 mm. Wing would be better in 2 mm but I couldn't get any. Used a bit of balsa - spar, part of the wing blocks cum LG block cum formers, and some scrap foam board for formers for the top

Fuse doublers also 3.5 mm Corro

The LG Block is 10 mm hard Balsa sandwiched between 2 mm ply (to prevent crushing on tightening the bolts)

Used a hard wood dowel for the front wing attachment. It goes into the balsa block in the front of the wing.

Foamboard (like depron) formers on top

The pilot is a model of Mr. K.K. Iyer, so I added a mustache for authenticity 

  to Mr. Iyer sir!

The covering on top is thick chart paper, covered with sign vinyl. Used this method when making an FT Spitfire, and adapted it here

The hatch is on top, as I am putting the LiPo there. Plan on using a 2650 3S, weighing 215 grams, to give me a flying weight of 1200 grams

To bend corro, I cut through alternate flutes on one side.

Congrats Sir,  All the best for maiden

Put some sign vinyl on it

Whew!!!

Thank you Abhi

Wow nice build sir .... waiting for maiden videos

Great build sir

Thank you Ramarao and Maahin 

I must confess, I am a little worried about the high battery. Hope it doesn't cause instability, although the model is supposed to fly inverted or straight with equal ease 

Try and keep the battery lower. Even if it doesn't cause instability, any aerobatic plane should always have cg as close to the wings as possible. Helps in achieving smoother rolls etc. etc.

True. But no space 

Awesome, Strong build sanjay sir.
What AUW you landed sir.

Thanks Manoj

AUW with 3S 2650 mAh was 1.2 kg. flew beautifully. Video will be uploaded shortly

Beautiful build and nice idea. The Pilot looks more like you with Mustachio Sanjay Sir.

Thanks Sandy boss

BTW, where is Mr. Iyer? I hope he is not offended - these teenagers do take umbrage 

And Maahin, the battery position did not seem to affect the performance 

Sanjay sir

Good build any plan, link etc

Amazing flyer and very neat build. Needed only two clicks of trim on maiden flight. For a scratchbuilt plane that is Amazing.

Thank you Gusty Saheb. Reply #2 references the plans. Girish is also quite tickled with the model; he too plans to build one. A 20-25 Nitro will also be very good on this 

Thanks Maahin! Your support helped a lot, especially after my second flight when we had to retrieve it from the Car Park

Here's the video...



apologies for the delay in posting.. have been having troubled internet today.

Hahahhaa... look at that...u shud be doing this on the field sir and we will post a pic

WOW! She's a rocket sir,what an amazing build and hats off to you sir for your speed with building planes and their success!

GS - What is BW in your signature?

Thank you Priyum

First thread post : Yesterday at 06:45:05 PM = Plane building starts
Today at 12:06:27 PM  = Maiden flight done

Amazing speed Sir
With , in between Posts and clicks ..
 

Sir it originally meant best wishes but now you got me thinking...
BTW I support yours and iyer sirs dirty ol men club...:D

That smile is quite familiar, happens quite often at our field...

Thanks Girish 

Flew another couple of sorties today; only Girish and I.

The more I fly it, the more I like it! Thinking of starting a spare one - just in case 

Just a different sort of beast from what I've been flying so far, more like this:

Moochch needs more salt than pepper to represent members of D.O.M. Club 

  Iyer sir

Actually there is less resemblance, you are more handsome  

Sanjay,
You have a superb plane there..  The speed you build your planes is tremendous too.. 
The video shows what a nice flyer this is... very tempting to build.. I need some coro now..

Noticed the coro is different thickness at various parts.. what thicknesses do you recommend?

Might even discuss with my friends Mark and Allan and see how this CAP will come out in Depron or Black EPP covered in reinforced glassfibre tape.

What do you think?

I share the same thoughts as you about building another Cap and having it as spare...

Love my Mako in EPP. What a stable slow flyer it is. I want to have another as spare... just in case!!

Deepak

 

Deepak, reply #3 references the corro thickness.

I guess you could make it out of foam too. I prefer corro, it's stronger

Super build Sanjay sir   

Thank you Vishal 

Thanks again to Girish,for the great photography!

Some super pics.... where is the flying site Sanjay..doesnt look like Bhondsi...The hills are missing!!

Deepak this is sector 29, Leisure Valley Park. 3 minutes from my home. Bhondsi is one hour

Thanks Sanjay... wish I knew about this in December.... Would have loved to visit. Maybe next time!!

Deepak sir, December was 7 months ago, time for a visit again

Sanjay rai...on of the photo suggest heart to heart talk with your sweet heart ))

Oh . Which one?

What a beauty  Superb Sanjai Bhayya!

Thanks Sam

Superb build log Sanjay sir! 

Inspired by you corro builds, and lack of cash/balsa availability has made me [*follow] your humble footsteps to build my first rcplane using corro. Will be starting my build log soon, plans are done, awaiting radio set for delivery.

EDIT: *

Thank you. Good luck for your build

the plane with yellow black strips ,you holding ( actually checking bat) but appears a true rc flyer having heart to heart with beauty

Sorry Girish...I missed your post. Yes a visit is due again in the near future. Will look you guys up when I visit...
Safe landings!

looks nice. Great effort

 

A perfect design built manual for every beginner ...we must thank sanjayrai55" for that

  for thanking 

Sanj you need to upload some scale drawings or plans for this so more of us can build it...  I hope you are saving the original plane for me.
I am going to build one here as soon as I get some time.. Coro fuselage and Depron wing.. 

Dee - there is a reference in the beginning

drawing of spad cap232

kp

Mr. Sahai. You are either patently dumb or blatantly rude: or both

You sent me two PMs shouting in capitals your demand for this. I referred you to this topic - which you obviously haven't read through. What you are doing is needless harassment and the forum adminstrators do know how to deal with that. So kindly maintain decorum

Yes,  downloaded Thanks....  It is for 1000mm span but you have 1200mm.. Thats why I asked.
No problem, I will try to grade it from the A4 sheet on that site..

Link to Gallery

https://postimg.cc/gallery/1dtfw7ak/

  :thumbsup:Good going chief...