By referring previous discussions in forum , we have made this . thank you rcindia   ,

nice build 

you can sand the leading edge to make angle of attack a little more steeper

Good effort !

If you have not test flown this, please do a "glide test" in a heavy grass area (which would minimize damage during tests).  There are posts/videos (especially by Ashta bhai) which describes the glide test, please search and watch.  It would help you with determining the flying characteristics and getting the CG right before you take off on motor power.

Being diligent about this can make the difference between a discouraging first crash or the bliss of success.  All the best !

bhai , upto  now  we  didnt test the plane , can you help me in precautions to be taken care for the testfly

Hi,
Good to see some one from thanjavur, few thing I would suggest you.
1.   Your wing seems not covered with tape. If so try to cover it up to prevent damage in case crash.
2.   Check for wing warp if any. If it is there your model will keep banking one side
3.   Check your horizontal stabilizer is level. Also check and ensure your control surface throughs are not too much. Particularly aileron .
Luckily I had lot of people to guide me in bangalore. Good luck for your first flight.

Vishnu
Go thru this, if any any query you could ask

http://www.rcindia.org/beginners-zone/conquer-your-maiden-flight-woes!!!/