I have reduced the plan to 29%.
Suggest to go for min 18Inch
7.4V 350mAh 2cell,Approx Weight (g): 22.0 (OK)
2812 Brushless Motor 1600KV,Max watt (W): 103,Thrust: 470g, Weight (g): 22
Suggest this- AX 1806N 2500kv Brushless Micro Motor (19g)
Less amp motor for longer flying and reduce weight on low amp ESC
Speed Controller 18 amp, Weight: 18g
For the above motor 10Amp ESC reqd
9g Micro Servo, approx-45-50 gms
Will be too big for a 12" or 18 inch Plane ( have alook at planes on Hobby king they give wing span with servos)
and rest of the auw would include the cf tubes, body, connectors,Rx etc
Need to see the RX weight & the pushrods the push rod stopper is also a weight....
so total auw im expecting around 200-250gms.
Is the setup feasible for 3d?
What size prop should i use with that motor? 5x3 Prop
Most of the items are from AEW
http://www.aeroworks.co.in/index.html.