RC India
Home Help Calendar Login Register
Welcome Guest, please login or register.
 
Pages: [1]   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« on: January 26, 2011, 08:49:47 PM »
prateek13
FPV Mission Man
Plane Lover
Forum Hero

*****

Reputation Power: 14 
prateek13 has no influence.
Offline Offline

City: Dona Paula, Panaji
State: Goa
RC Skills: Intermediate
Posts: 1099
Join Date: May, 2010

just a simple question!

Will this ESC work with this motor?

motor-
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=2140

Model: TR35-36-B
Input Voltage : 7.4V~11.1V (2~3S Li-po)
Kv : 1300rpm/V } within 10%
Nb. of turns : 12 Delta
Max. efficiency current : 15~25A
Current capacity : 35A/30s
Internal Resistance : 42 mohm
No Load current @ 7V: 1.83A
Dimensions : 35mm X 36mm / 1.38in X 1.41in
Shaft diameter : 4mm / 0.16in
Weight : 106g / 3.74oz
Number of poles/magnets : 14
Recommended model weight : 1000~1900g / 35~67oz
Power equivalent : .25 to .30 IC  glow engine (400W+)


says Current capacity : 35A/30s

and ESC:-
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=14872

35 amp esc

please help
Logged
Award | OFNA Nexx8 | Art-Tech Edge 540T | Glidiator V2 | Hawker Tempest | Cessna Citation Jet
Turnigy 9X
FPV Platforms : CF Tricopter| HK EPP FPV | Bixler 1 | Bixler 2 | DJI Phantom 2 +H3 3D
 

Read
« Reply #1 on: January 26, 2011, 08:52:40 PM »
akky
Heli Lover
Forum Hero

*****

Reputation Power: 10 
akky has no influence.
Offline Offline

City: Allahabad
State: Uttar Pradesh
RC Skills: Beginner
Posts: 763
Join Date: May, 2010

I am not weird...Instead i am a bit different....
will advise u to use at-least minimum of 40 amp ....but i would use 55 amps if i were u
Logged
Arcarious @ Akky.....
I have never crashed while flying....Its the Landing only that gets me....
Happy Landings....&.....Happy Crashings
 

Read
« Reply #2 on: January 26, 2011, 09:03:03 PM »
SunLikeStar
Forum Administrator
Forum Hero

*****

Reputation Power: 20 
SunLikeStar barely matters.SunLikeStar barely matters.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 1902
Join Date: Aug, 2010

High spirits we have: gravity we flout.
what prop are you planning to use on it?
Logged
 

Read
« Reply #3 on: January 26, 2011, 09:07:16 PM »
akky
Heli Lover
Forum Hero

*****

Reputation Power: 10 
akky has no influence.
Offline Offline

City: Allahabad
State: Uttar Pradesh
RC Skills: Beginner
Posts: 763
Join Date: May, 2010

I am not weird...Instead i am a bit different....
9x7 at least master airscrew one or would preffer 11x 6 master airscrew
Logged
Arcarious @ Akky.....
I have never crashed while flying....Its the Landing only that gets me....
Happy Landings....&.....Happy Crashings
 

Read
« Reply #4 on: January 26, 2011, 09:10:14 PM »
SunLikeStar
Forum Administrator
Forum Hero

*****

Reputation Power: 20 
SunLikeStar barely matters.SunLikeStar barely matters.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 1902
Join Date: Aug, 2010

High spirits we have: gravity we flout.
on a 11x6 master it will pull more than 40 amps near WOT, not sure about 9x7.
Logged
 

Read
« Reply #5 on: January 26, 2011, 09:17:30 PM »
akky
Heli Lover
Forum Hero

*****

Reputation Power: 10 
akky has no influence.
Offline Offline

City: Allahabad
State: Uttar Pradesh
RC Skills: Beginner
Posts: 763
Join Date: May, 2010

I am not weird...Instead i am a bit different....
sorry it was 10x7 n not 11x6
Logged
Arcarious @ Akky.....
I have never crashed while flying....Its the Landing only that gets me....
Happy Landings....&.....Happy Crashings
 

Read
« Reply #6 on: January 26, 2011, 09:40:59 PM »
SunLikeStar
Forum Administrator
Forum Hero

*****

Reputation Power: 20 
SunLikeStar barely matters.SunLikeStar barely matters.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 1902
Join Date: Aug, 2010

High spirits we have: gravity we flout.
10x7 is still not good for this motor, 10x6 or 11x4 will be better choice and you can use a 40A ESC with it. You can run a 10x7 but you'll need a 50A ESC and the motor will run hot.
Logged
 

Read
« Reply #7 on: January 26, 2011, 10:14:41 PM »
prateek13
FPV Mission Man
Plane Lover
Forum Hero

*****

Reputation Power: 14 
prateek13 has no influence.
Offline Offline

City: Dona Paula, Panaji
State: Goa
RC Skills: Intermediate
Posts: 1099
Join Date: May, 2010
how about a 9x6?
Logged
Award | OFNA Nexx8 | Art-Tech Edge 540T | Glidiator V2 | Hawker Tempest | Cessna Citation Jet
Turnigy 9X
FPV Platforms : CF Tricopter| HK EPP FPV | Bixler 1 | Bixler 2 | DJI Phantom 2 +H3 3D
 

Read
« Reply #8 on: January 26, 2011, 10:22:36 PM »
SunLikeStar
Forum Administrator
Forum Hero

*****

Reputation Power: 20 
SunLikeStar barely matters.SunLikeStar barely matters.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 1902
Join Date: Aug, 2010

High spirits we have: gravity we flout.
9x6 should be good on 40A ESC.
Logged
 

Read
« Reply #9 on: January 26, 2011, 10:27:44 PM »
prateek13
FPV Mission Man
Plane Lover
Forum Hero

*****

Reputation Power: 14 
prateek13 has no influence.
Offline Offline

City: Dona Paula, Panaji
State: Goa
RC Skills: Intermediate
Posts: 1099
Join Date: May, 2010
and any idea how much thrust,power will it create?
Logged
Award | OFNA Nexx8 | Art-Tech Edge 540T | Glidiator V2 | Hawker Tempest | Cessna Citation Jet
Turnigy 9X
FPV Platforms : CF Tricopter| HK EPP FPV | Bixler 1 | Bixler 2 | DJI Phantom 2 +H3 3D
 

Read
« Reply #10 on: January 26, 2011, 10:45:54 PM »
SunLikeStar
Forum Administrator
Forum Hero

*****

Reputation Power: 20 
SunLikeStar barely matters.SunLikeStar barely matters.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 1902
Join Date: Aug, 2010

High spirits we have: gravity we flout.
not sure about the numbers but 10x6 apc is the best prop for it IMO.
Logged
 

Read
« Reply #11 on: January 27, 2011, 10:18:45 PM »
prateek13
FPV Mission Man
Plane Lover
Forum Hero

*****

Reputation Power: 14 
prateek13 has no influence.
Offline Offline

City: Dona Paula, Panaji
State: Goa
RC Skills: Intermediate
Posts: 1099
Join Date: May, 2010
a 10x5,10x5.5 will be ok? Huh? Roll Eyes
Logged
Award | OFNA Nexx8 | Art-Tech Edge 540T | Glidiator V2 | Hawker Tempest | Cessna Citation Jet
Turnigy 9X
FPV Platforms : CF Tricopter| HK EPP FPV | Bixler 1 | Bixler 2 | DJI Phantom 2 +H3 3D
 

Read
« Reply #12 on: January 27, 2011, 10:41:33 PM »
SunLikeStar
Forum Administrator
Forum Hero

*****

Reputation Power: 20 
SunLikeStar barely matters.SunLikeStar barely matters.
Offline Offline

City: Pune
State: Maharashtra
RC Skills: Intermediate
Posts: 1902
Join Date: Aug, 2010

High spirits we have: gravity we flout.
yep, if 10x6 is ok then 10x5.5 is definitely ok! I'm getting a feeling that you want it to be a slow flyer. If thats the case go with 11x4.
Logged
 

Read
« Reply #13 on: May 22, 2011, 10:12:51 PM »
ved
psychic flyer!!
Plane Lover
Forum Hero
*****

Reputation Power: 8 
ved has no influence.
Offline Offline

City: Marcel
State: Goa
RC Skills: Beginner
Posts: 605
Join Date: Sep, 2010
Hi
I wanted to use this motor on a delta flying wing.Please tell me can I use 35A ESC with this motor with 8 x 4 Prop?Please
  Motor
 http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=4321
Logged
Turnigy 9x w. Er9x | Custom Hovercraft |Scratch Build Boat | Tricopter | Skysurfer V3|
 

Read
« Reply #14 on: May 22, 2011, 10:25:51 PM »
ved
psychic flyer!!
Plane Lover
Forum Hero
*****

Reputation Power: 8 
ved has no influence.
Offline Offline

City: Marcel
State: Goa
RC Skills: Beginner
Posts: 605
Join Date: Sep, 2010
Please
Logged
Turnigy 9x w. Er9x | Custom Hovercraft |Scratch Build Boat | Tricopter | Skysurfer V3|
 

Read
« Reply #15 on: May 22, 2011, 10:30:26 PM »
spitfire
Plane Lover
Forum Hero
*****

Reputation Power: 7 
spitfire has no influence.
Offline Offline

City: Bengaluru
State: Karnataka
RC Skills: Advanced
Posts: 506
Join Date: Jul, 2010
As per the data provided by hobbyking, I dont think there will be any problem using 35 Amp ESC with this motor. In fact as maximum current rating seems to be around 13 amp, 35amp ESC will be only add weight. You can use ESC having rating greater than 15Amp safely.
Logged
 

Read
« Reply #16 on: May 23, 2011, 12:59:04 PM »
ved
psychic flyer!!
Plane Lover
Forum Hero
*****

Reputation Power: 8 
ved has no influence.
Offline Offline

City: Marcel
State: Goa
RC Skills: Beginner
Posts: 605
Join Date: Sep, 2010
Thanks
Logged
Turnigy 9x w. Er9x | Custom Hovercraft |Scratch Build Boat | Tricopter | Skysurfer V3|
 

Pages: [1]   Go Up
RC India  RC Equipments  Electric Power  Topic: Will this ESC work with this motor?
« previous next »
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Motor does not work due to ESC issue
Electric Power 		rao876 11 7848 Last post April 18, 2010, 06:44:55 PM
by atul_pg
My work . Shoot of real estate via Inspire1
RC Maneuvers and Skills 		cyromanish 4 30671 Last post January 06, 2018, 05:57:20 AM
by VTOLkarthik
Will this motor work? Help needed
Beginners Zone 		Prasad Dsa 7 3930 Last post August 16, 2016, 08:47:30 PM
by Prasad Dsa
Will 4 in one multiprotocol module work with x8r?
Radios and Receivers 		ghoshatanu56 0 1269 Last post August 09, 2017, 09:16:06 PM
by ghoshatanu56
Help! My motor does not work properly!
Electric Planes 		sujak 15 3024 Last post September 13, 2020, 06:25:59 PM
by sujak
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder 		Realized by Systalent | XHTML | CSS