RC India
Welcome Guest, please login or register.
 
Pages: 1 2 [3] 4  All   Go Down
0 Members and 2 Guests are viewing this topic. Topic Tools Topic Tools 
Read
« Reply #50 on: April 26, 2012, 06:48:40 PM »
VC
Boat Lover
Forum Hero

*****

Reputation Power: 64 
VC is a rising star!VC is a rising star!VC is a rising star!VC is a rising star!VC is a rising star!VC is a rising star!
Offline Offline

City: Guwahati
State: Assam
RC Skills: Beginner
Posts: 5598
Join Date: Nov, 2009

L'enfant Terrible du RCIndia



After this Darlington pair is completed, what do we do next?
Logged

Growing old is mandatory, growing up is optional!
 

Read
« Reply #51 on: April 26, 2012, 07:08:54 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



VC Sir.. its too hard to upload fast.. when we finish the Darlington pair, the 80% of our work is done.. after this stage, we have only a little work of adding the potentiometer and and final wiring.. trying to upload..
Logged

Phoenix.........
 

Read
« Reply #52 on: April 26, 2012, 10:50:35 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



              Up to now, we saw a simple pair of transistors as Darlington.. is capable of driving some smaller motors.. and look for a great powerful pair, that can haul a big load.. this pair is wired around the ever classic transistor TIP 3055.. you can also use 2N 3055 or similar, but will be much heavy and cumbersome.. will take lots of space.. but TIP 3055 is a great package is very weight less and thin.. and can fix to any surface because of its smaller size and flat bottom.. so check out..
               Here we are starting with one TIP 3055 and one SL 100..
fix the transistor over a good heat sink, with insulator..

ESC-17.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-17.jpg (75.63 KB, 800x600 - viewed 1039 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #53 on: April 26, 2012, 10:54:58 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



        Now solder the smaller transistor, (SL100), as shown.. you can clearly see the all leads..
in close ups..

ESC-19.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-19.jpg (82.05 KB, 800x600 - viewed 1055 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #54 on: April 26, 2012, 11:02:01 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



solder a good high density copper wire with RED insulation on the COLLECTOR leads of transistors.. this wire is the BATTERY +..
solder a good high density copper wire with YELLOW insulation on the EMITTER of TIP 3055... this wire is MOTOR +..

ESC-21.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-21.jpg (73.87 KB, 800x600 - viewed 949 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #55 on: April 26, 2012, 11:07:14 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



now take two equal lenghts of HD copper wire with BLACK insulation, and cut it half.. then rejoin the wire at center and solder it.. after soldering, this BLACK wire must be twisted on the RED and YELLOW wires as shown.. this BLACK wire is for BATTERY - and MOTOR -...

ESC-23.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-23.jpg (82.36 KB, 800x600 - viewed 933 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #56 on: April 26, 2012, 11:12:20 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



now solder a good electrolytic capacitor in between the EMITTER of the TIP 3055, and the BATTERY - wire as shown.. a 4700 micro Farad capacitor is best.. can use a small 1000 MFD.. make sure that the leads of the capacitor is short as possible..

ESC-25.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-25.jpg (80.52 KB, 800x600 - viewed 951 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #57 on: April 26, 2012, 11:17:36 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



solder three wires as you like, on the sliding potentiometer as shown.. if you purchase a dual one, you can simply avoid the next three terminals and can choose the needed three leads..
solder the center point of the potentiometer, to the BASE of the SL 100 transistor as shown..

ESC-27.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-27.jpg (69.16 KB, 800x600 - viewed 903 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #58 on: April 26, 2012, 11:22:16 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



never solder the center wire as wrong.. take a good care about this..
after that solder any of the extreme end of the potentio meter to the BATTERY -... as shown.. in the second photograph..

ESC-29.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-29.jpg (78.28 KB, 800x600 - viewed 1009 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #59 on: April 26, 2012, 11:28:21 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



now we have a thirth wire from the potentiometer, here coloured as yellow.. solder this one to the COLLECTOR points of both transistors.. we can add 100 to 500 Ohms resistor in between the potentio meter and the COLLECTOR ( BATTERY +) lead but here it is not essntial..
now the basic ESC is ready for the test.. see how simple it is..

ESC-31.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-31.jpg (84.58 KB, 800x600 - viewed 985 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #60 on: April 26, 2012, 11:36:35 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



now connect the YELLOW and BLACK wire to the motor that you want to run..
if you want to change the direction of the motor, just change the motor wires.. and before going to connect BATTERY wire, make sure that the moving arm of the potentiometer, is closed at the BATTERY - point of the potentio meter.. if not the motor will start instantly while connecting the battery.. can inflict damage or injuries.. take care.. after making sure, just connect the battery wire to a battery source, as RED + and BLACK -.. 

ESC-33.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-33.jpg (86.26 KB, 800x600 - viewed 898 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #61 on: April 26, 2012, 11:41:29 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



        Now we can add any motor to the ESC.. make sure the heat sink is good while using big loads.. and if the load is too much, you can add and bridge a second TIP 3055 near to the main transistor.. or can add three for huge loads..
here you can see various motors under test..

ESC-35.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-35.jpg (94.68 KB, 800x600 - viewed 903 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #62 on: April 26, 2012, 11:50:38 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



the speed of the motor will change while the sliding resistor moves from one end to another.. we can change the up and down side of the speed by changing the two extreme wires on potentiometer.. now, we got the simple but effective ESC.. then how can we control the speed by a hobby radio..? and how can we achieve the reverse..? follows..

ESC-37.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-37.jpg (92.87 KB, 800x600 - viewed 953 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #63 on: April 27, 2012, 12:19:37 AM »
DrGKhanna
Veni Vedi Vici
Plane Lover
Active Member

**

Reputation Power: 1 
DrGKhanna has no influence.
Offline Offline

City: Chandigarh
State: Chandigarh
RC Skills: Beginner
Posts: 25
Join Date: Mar, 2011

No Guts No Glory



Roopesh sir,what should we call you  Huh?...a genius ?.. god gifted ? Gods gift to all modellers on rcindia ?...all of the above ?....ABSOLUTELY Clap... Thumbs Up ...words are not enough to describe the greatness we know as Mr. Roopesh Krishna sir... Hats Off
Logged
 

Read
« Reply #64 on: April 27, 2012, 12:35:45 AM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



Dr Khannajee, now we are living in a graceful time of Modelling.. means we have ample of stuffs around us.. but when i started modelmaking years before, to me nothing was around.. and my radio was a self made crude one, but i controlled my craft nicely.. today we have the edge of 2.4 GHz.. still, the needed stuffs are expensive.. this keeps many modellers far from modelling.. so, here you can see how simple is to make an ESC..!!  we never used any electronic complications here.. still works fine.. we will exmine all things here, by step by step, as how to control the speed with radio, reverse, cooling stuffs.. watercooling all.. will works perfectly, and saves us a lots.. there is no amazements.. if you examine once you will find it all easy.. make crafts.. RCyit..many.. save lots.. while enjoying Rcying... Salute Thumbs Up
Logged

Phoenix.........
 

Read
« Reply #65 on: April 27, 2012, 12:42:29 AM »
DrGKhanna
Veni Vedi Vici
Plane Lover
Active Member

**

Reputation Power: 1 
DrGKhanna has no influence.
Offline Offline

City: Chandigarh
State: Chandigarh
RC Skills: Beginner
Posts: 25
Join Date: Mar, 2011

No Guts No Glory



I'm all ears sir,following this topic very keenly with complete interest. Thumbs Up
Logged
 

Read
« Reply #66 on: April 27, 2012, 01:18:28 AM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



 Salute follows..
Logged

Phoenix.........
 

Read
« Reply #67 on: April 27, 2012, 03:15:27 PM »
RcBharat
Plane Lover
Forum Veteran

****

Reputation Power: 4 
RcBharat has no influence.
Offline Offline

City: Hyderabad
State: Andhra Pradesh
RC Skills: Intermediate
Posts: 368
Join Date: Jan, 2012



 Hats Off Hats Off Hats Off Hats Off
Logged

Visit us at      http://www.rcbharat.com
Follow us at    https://www.facebook.com/RCBharat
 

Read
« Reply #68 on: April 27, 2012, 07:53:01 PM »
manojswizera
Plane Lover
Forum Hero

*****

Reputation Power: 18 
manojswizera has no influence.
Offline Offline

City: AURANGABAD
State: Maharashtra
RC Skills: Beginner
Posts: 1336
Join Date: Oct, 2011



 Bow  Bow  Bow
Logged

Russ-40 Trainer, Mr.moss, Pushler, Skysurfer, Mugi , F-22, Red swan, Xtra-300, redfury, flying mantaray.
 

Read
« Reply #69 on: April 27, 2012, 10:07:53 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



  thank you all..
Up to here, we made the ESC with ease.. now we have to control thespeed and reverse with our radio.. it is so easy to do that.. as we are avoiding all electronic complication, i told you we can adopt the electromechanical method here.. so, at first we can go to control the throttle level.. for this we need only a micro servo..

           At first, make an appropriate hole, on the moving arm of the potentio meter.. with a twist drill.. the hole must be appropriate, to the push rod that we are going to use.. 
         Now take the micro servo, and fix the longest servo arm on it..

ESC-39.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-39.jpg (92.21 KB, 800x600 - viewed 980 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #70 on: April 27, 2012, 10:13:51 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



now time to fix the potentio meter over a piece of foam board.. we can fix this firmly over a metal or wooden surface, but i prefer the foam board because of it's flexible nature.. you can see the simple fixation here.. take the picture as a key.. its all easy..

ESC-42.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-42.jpg (51.94 KB, 800x600 - viewed 929 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #71 on: April 27, 2012, 10:22:11 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



         Fix the servo in such a way, that the arm of the servo, can slide easily.. as shown.. you can choose any convenient method to place the servo.. this arrangement can also be done directly on crafts..

ESC-44.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-44.jpg (61.74 KB, 800x600 - viewed 921 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #72 on: April 27, 2012, 10:26:18 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



           if we are looking for a permanent set up, we can simply fix the servo with two drops of industrial cyano glue, but if not can fix the servo with screws..
           our next step is to fix the drive rod.. here i used a brass rod, to avoid any rust and smooth working..

ESC-46.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-46.jpg (50.77 KB, 800x600 - viewed 886 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #73 on: April 27, 2012, 10:44:53 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



                Make sure the servo drive rod  is perfect.. for smooth  working.. slice a little piece of ball point refill..

ESC-48.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-48.jpg (74.26 KB, 800x600 - viewed 888 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Read
« Reply #74 on: April 27, 2012, 10:50:34 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



insert the piece over the drive rod end.. drop a little glue between it.. secure it..

ESC-50.jpg
Re: Brushed Motor Controllers for Boats,ships and Cars..with reverse function..
* ESC-50.jpg (55.1 KB, 800x600 - viewed 899 times.)
This post has 1 more images(s)/attachment(s). Please login or register to view them.
Logged

Phoenix.........
 

Pages: 1 2 [3] 4  All   Go Up
Jump to:  

Related Topics
Subject Started by Replies Views Last post
Brushed ESC with Reverse function
For Sale
VC 23 16465 Last post May 23, 2011, 02:33:18 AM
by KALYANPRODHAN
its my ESC for ships and boats with Reverse...
Electric Power
roopeshkrishna 6 6950 Last post May 05, 2012, 06:06:21 PM
by roopeshkrishna
Great Brushed Motor for Large RC Boats
Boats
VC 2 3877 Last post February 22, 2012, 09:03:56 PM
by roopeshkrishna
Wanted brushed Motor ESC for model boats
Wanted
pline 6 2478 Last post April 25, 2016, 09:43:15 AM
by pline
Traxxas velineon brushless motor esc for 1/10 rc cars or boats
For Sale - Completed
HVP 0 513 Last post October 12, 2021, 06:50:47 PM
by HVP