RC India
Welcome Guest, please login or register.
 
Pages: 1 [2]  All   Go Down
0 Members and 1 Guest are viewing this topic. Topic Tools Topic Tools 
Read
« Reply #25 on: February 05, 2010, 07:08:59 PM »
splitz
Plane Lover
Active Member
**

Reputation Power: 1 
splitz has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Beginner
Posts: 20
Join Date: Oct, 2009



i earlier checked the link of robosoft...the motors are really cheap...i will def order sm from there......the solar LED thingy is best for such projects...will study about it in detail...

the current battery i have is a little heavy...it makes my light planes fly fast ...they fly slowly without the batt and motor when just chucked...will have to buy sm light equipments!!

since i screwed up on the heli circuit...m currently charging my batt by soldering the two wire ends of my cell phone charger (output 5.7V 800 mA)to the resp + and - ends of battery.....after half an hour...it gets a little warm..thats the time i remove it from charging.

i have not experimented with CR2032....will do that..soon!!...but i think it must be low current battery...since its used on the motherboard...basically to maintain system clock....but i will still try!

Thank you all very much for all the links and tips!!
Logged
 

Read
« Reply #26 on: March 21, 2010, 03:47:11 PM »
ankur
Scratch builder and diy'er
Plane Lover
Forum Hero

*****

Reputation Power: 9 
ankur has no influence.
Offline Offline

City: Allahabad
State: Uttar Pradesh
RC Skills: Beginner
Posts: 750
Join Date: Aug, 2009

I am Gr8



some links of 4mm vibra motors
link 1
link 2
note that above links are not the same
http://vibratormotor.com/vib/4kh1-03wb.html
http://www.vibratormotor.com/vib/z4kh3b0030181.html
http://vibratormotor.com/vib/z4kl2b0030191.html
http://vibratormotor.com/vib/4kl-0354b.html
http://vibratormotor.com/vib/z4sl2b0280131.html
Logged

Ankur Singh,
Aged 14-Studing in Class 10th
 

Read
« Reply #27 on: May 05, 2010, 02:04:00 PM »
spitfirefan
Plane Lover
Active Member
**

Reputation Power: 1 
spitfirefan has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Intermediate
Posts: 3
Join Date: May, 2010



I never imagined that the hobby I had was so popular before I cam to this site!!!

Splitz - I have been through exactly the same route that you are currently on! from all that i have read you have made considerable progress on the basic elements of RC flying. As suggested by someone, first the free flight (just chuck), then the powered flight (with motor, prop and battery only) and then RC - thats the only way to get there with the small planes. Considering your motor size and wingspan and with no offence to whoever has made the recommendation - dont waste your time with the CR 2032. that will never fly your plane simply because of the weight. A 2032 (or two of them coupled) maybe good for a 15-16 inch wingspan with a 4 odd inch width, not for yours.

Your choice of the china make mini heli is bang on the mark. Those models have everything you possibly need. Theres one specific model that will be a great help. It comes with two main motors driving two rotors in opposite directions and one tail rotor (the best way to identify is to look at the tail rotor, it will be pointed upwards and not sidewards for these helis and you can see the two main motors). This heli will have three motors in all and the right circuit which you can use the differential on a biplane to turn. The props from the mini heli do the job more often than not, but at the same time if your are looking at improved performance and you are patient enough, carve our a prop out of a 2mm or 4mm balsa sheet(for the biplane the tail props will be good enough). the battery in the china heli is not more than 1.7 odd grams and the main motor is of similar weight. You can use 1mm balsa for the plane too. Incase you need even smaller battaries (and since you are in Mumbai) you can visit Lamington road and in the lane opposite Ayodhya hotel theres a navjivan battery store(its a typical "baakda" on the road, the aarey milk stall type). They have 30-50 mah lipos that weigh around a gram and will cost you Rs. 150 Smiley. Superb for your stuff. The best source of the motor is the link provided in this post. And yes, the china helis are now on eBay.in for as less as rs. 500 and you can also visit crawford market (specifically behind manish market, near CST station) and buy these china helis for as less as Rs. 400 complete. Incase you decide to use button cells, anything more than a g1 will be a load and g1s will drain faster than you can wink!!

You may also like to consider using the tail motors from the mini heli as your main motors. They are powerful and lightweight. Your total weight for the equipment (if you want to make a 6 inch wingspan fly) should be :

Lipo - 3.7, 30-50            -     1.5 gms
Main motor (simple plane)  -    1.7 gms
Motors (each, bi plane)     -    .8 gm
Prop (single)                   -     2 inch, .5 gms
Props (Bi)                       -     1.2 - 1.4 - .6 gms (the heli tail rotor)
Rx                                 -     1.3 gms (from the heli again)
Plane                             -      Balsa frame with kite/tissue paper - 1.6 - 2 gms.

And you will have the total weight at around 7 odd grams.

Finally, for the bi - plane the prop and go directly on the motor, but for the single motor plane you might want to consider a gear ratio (you can use the gear from the china heli too) to increase thrust. Hope this was helpful.

Andy
Logged
 

Read
« Reply #28 on: May 15, 2010, 10:33:17 PM »
Gaurav
Plane Lover
Active Member
**

Reputation Power: 1 
Gaurav has no influence.
Offline Offline

City: Hyderabad
State: Andhra Pradesh
RC Skills: Beginner
Posts: 30
Join Date: May, 2010



That is a very very good idea!!!
I have a suggestion (experts pls comment) - if you use 2 motors; one to the left and one to the right, then you can increase AUW also and eliminate rudder and ailerons by using differential control, i.e. lower rpm of left motor to turn left and vice versa...
Also the motors that you used are called are pager motors. They widely available; so you can buy more motors for future models...
Logged
 

Read
« Reply #29 on: May 15, 2010, 10:50:46 PM »
VC
Boat Lover
Forum Hero

*****

Reputation Power: 64 
VC is a rising star!VC is a rising star!VC is a rising star!VC is a rising star!VC is a rising star!VC is a rising star!
Offline Offline

City: Guwahati
State: Assam
RC Skills: Beginner
Posts: 5598
Join Date: Nov, 2009

L'enfant Terrible du RCIndia



If you know a good cellphone repairing shop, the vibrator motors can be had for as little as Rs. 20/-. Getting the eccentric weights off is a little tricky, but it can be done. I completely agree with Gaurav about differential control. I have used the same technique on a bigger Chinese Glider, it HAS to work on a smaller model.
« Last Edit: May 16, 2010, 12:56:56 AM by VC » Logged

Growing old is mandatory, growing up is optional!
 

Read
« Reply #30 on: May 18, 2010, 03:25:07 PM »
spitfirefan
Plane Lover
Active Member
**

Reputation Power: 1 
spitfirefan has no influence.
Offline Offline

City: Mumbai
State: Maharashtra
RC Skills: Intermediate
Posts: 3
Join Date: May, 2010



Oh yes the differntial does well for a beginer in terms of doing away with the airleon and rudder. THe only flipside is the actual response using differential. Also, personally I have had a hard time finding a small enough rx with this function Sad
Logged
 

Read
« Reply #31 on: October 16, 2010, 06:33:18 PM »
roopeshkrishna
Boat Lover
Forum Hero

*****

Reputation Power: 41 
roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...roopeshkrishna might someday be someone...
Offline Offline

City: calicut
State: Kerala
RC Skills: Beginner
Posts: 3602
Join Date: Oct, 2010

HYDRO PLANER.....



AHH..great efforts..friends..thanks for the ideas...
Logged

Phoenix.........
 

Read
« Reply #32 on: April 19, 2020, 06:30:25 PM »
connor00
Plane Lover
Active Member
**

Reputation Power: 1 
connor00 has no influence.
Offline Offline

City: kolkata
State: West Bengal
RC Skills: Intermediate
Posts: 2
Join Date: Apr, 2020



your idea just inspired me Cheesy now planning to buy an old Nokia phone from a refurbishing mobile store, will Nokia 1110 vibrator and battery work to make small aircraft?
Logged
 

Pages: 1 [2]  All   Go Up
Jump to: