Please suggest if I did it correct mounting of 100kv brushless ?
Bit difficult to tighten it as the groove is not similar to the traditional screw has
How to tighten it?
@iwincar
If you have a
100kv motor, i would like to buy it or give you a motor of your choice from my stock.
I see that you have posted 2 threads. I suppose they relate to the same motor mounting problem.
(It is better to stick to one thread for one issue)
Did the mount (X shaped) and the screws (black) come with the motor, or from some other source?
Did you not get a manual, or at least a piece of paper, with the motor, giving specs and mounting details?
From what you say it looks like the thread in the screws is different from that in the motor backplate. If so, forcing the screws in will spoil everything beyond reasonable repair.
Suggest you share the problem with a knowledgeable modeller in your area.
On the forum there is a risk that persons like me (without knowing the full details) may give you half baked answers, creating more problems instead of solutions. Partly because your posts are either not clear or lack detail.
I could perhaps assist if i knew what the real problem is:
1. Black countersunk screws too long
2. Black screws thread differs from thread in motor backplate
3. How to mount motor to mounting plate
4. How to mount to model
5. Motor and mount/screws from different sources
Blame my lack of understanding!